Often used on cabinet doors and file drawers, these cam locks fit into a ¾” dia. hole, the most common through-hole size, and have an arm that swings to lock.

Meet U.S. postal service guidelines for mailbox locks.

Swap out the key that’s needed to open these locks for extra security.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.

Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.

These locks open with their own unique key as well as a master key.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

A spring-loaded bushing keeps your door from vibrating open. These locks open and close with a slotted screwdriver, so they’re great if you want a simple keying system for your enclosure.

Secure cabinet doors and other fixtures that have smaller-than-standard-diameter through holes. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a slotted screwdriver.

These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

Prevent cabinet doors, drawers, and other enclosures with smaller-than-standard diameter through holes from vibrating open. Also known as compression cam locks, these locks create a tighter hold than standard cam locks, making them useful for doors that have a seal. These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

Quickly spot if these locks are open—a red indicator appears on the lock face or a spring-loaded cover pops up when they’re unlocked. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants.

Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.

The spring-loaded cover pops up when these locks are open, so you’re able to see from a distance when they're unlocked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. They open with a triangle key, so they match a keying system that's common for industrial enclosures and other machinery but are more secure than locks that open with a hex or slotted driver.

An gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs.

A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system.

Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.

Open these locks with a two-way key. Also known as a double-bit key, it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Trigger a light, alarm, or other device to signal your door is unlocked.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.

Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal.

Choose these locks if you need each one to open with a different key.

Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. They’re keyed alike, so they’re a good choice when you need several locks that open with the same key.

Open each of these locks with a different key.

Fold the ring handle into the recess to stay out of the way when not in use.

With a molded inset grip, the handle remains recessed to stay out of the way.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Choose these locks if you need several locks that open with the same key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating.

With a finger-grip knob, these latches fit where latches with handles won't.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.

Fold the ring handle into the recess to stay out of the way when not in use.

Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.

Raise the handle and it swings smoothly for easy latching and unlatching.

Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.

Similar to locks on a hotel safe, each user sets a new combination.