In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.

Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal.

Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. They’re keyed alike, so they’re a good choice when you need several locks that open with the same key.

Open each of these locks with a different key.

Fold the ring handle into the recess to stay out of the way when not in use.

When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Choose these locks if you need several locks that open with the same key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating.

The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.

Fold the ring handle into the recess to stay out of the way when not in use.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.

Raise the handle and it swings smoothly for easy latching and unlatching.

Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. All can be locked with a key as well as a padlock for added security.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Add a padlock for extra security.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on server cabinets and electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.