DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
For Finish For Finish |
|---|
|
|
For Use On For Use On |
|---|
|
|
Individual/Set Individual/Set |
|---|
|
File Type File Type |
|---|
 |  |
| Standard | Abrasive Grit |
Face Tooth Style Face Tooth Style |
|---|
|
File Style File Style |
|---|
|
Edge Tooth Style Edge Tooth Style |
|---|
|
Container Type Container Type |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Files
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
Lock Pick Sets
Open locks that are damaged or missing keys. This set includes a mix of 11 turning tools, hooks, rakes, and six removable handle grips. It comes in a pocket-sized case. It cannot be sold to Tennessee due to product registration requirements.
| Includes | Material | Cannot Be Sold To | Each | |
| One Turning Tool One 0.075" Medium Turning Tool - Full Twist on One End One 0.093" Medium Turning Tool - Full Twist on One End One 0.125" Medium Turning Tool - Full Twist on One End One Medium Hook - Half-Diamond One Half-Deep Hook One Double Hook - Medium & Shallow One Small Rake - Deep Hook One Small Rake - Half -Diamond One Medium Rake - Shallow Hook One Large Rake - Deep Hook Six Removable Grip Handles Carrying Case | Stainless Steel | TN | 000000 | 000000 |
Broken Key Extractor Sets
No need to call a locksmith—these sets include extractor picks to pull broken key stubs out of lock cylinders. Slide the pick next to the broken key, then hook it into a cut in the key to pull it out.
| Includes | Material | Each | |
| Four Extractor Picks, Carrying Case | Stainless Steel | 000000 | 000000 |
Padlock Shim Sets
Slide these shims between the padlock shackle and body to open most locks that are damaged or missing keys.
| Total No. of Pieces | Material | Includes | Each | |
| 20 | Stainless Steel | Five shims for each of the four most common shackle diameters | 000000 | 000000 |
Precision Rectangular Files
Double Cut
Single-Cut Edge
Thin Tapered
Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Thin tapered files taper extremely toward the point to fit tight spaces. Also known as warding files.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | Thick. | Edge Tooth Style | For Use On | Each | |
For Coarse Finish (No. 00) | ||||||
|---|---|---|---|---|---|---|
Thin Tapered | ||||||
Double-Cut Faces | ||||||
| 4" | 1/2" | 3/64" | Single Cut | Steel, Iron | 0000000 | 000000 |
| 6" | 5/8" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 8" | 7/8" | 11/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
For Medium Finish (No. 0) | ||||||
Thin Tapered | ||||||
Double-Cut Faces | ||||||
| 4" | 1/2" | 3/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 6" | 5/8" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 8" | 7/8" | 11/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
For Fine Finish (No. 2) | ||||||
Thin Tapered | ||||||
Double-Cut Faces | ||||||
| 4" | 33/64" | 3/32" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 6" | 5/8" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 8" | 7/8" | 11/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
For Extra Fine Finish (No. 4) | ||||||
Thin Tapered | ||||||
Double-Cut Faces | ||||||
| 4" | 5/8" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
| 6" | 5/8" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
Rectangular Files
Double Cut
Thin Tapered
Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
For technical drawings and 3-D models, click on a part number.
Thin Tapered
Thin tapered files taper more extremely toward the point than tapered files. They are often used to make notches in keys. Also known as warding files.
For Coarse Finish | For Medium Finish | For Fine Finish | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge Tooth Style | For Use On | Each | Each | Each | |||
Double-Cut Faces | ||||||||||
| 4" | 7/16" | 1/16" | Single Cut × Single Cut | Steel, Iron | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
| 6" | 5/8" | 1/16" | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 8" | 3/4" | 1/16" | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
File Sets
For technical drawings and 3-D models, click on a part number.
6-Piece Sets
 |  Half Round with Double-Cut Faces |  Tapered Rectangular with Double-Cut Faces |  Tapered Round with Double-Cut Face |
 Tapered Square with Double-Cut Faces |  Thin-Tapered Rectangular with Double-Cut Faces |  Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
6-Piece Sets with Wood Handles
 | Half Round with Double-Cut Faces | Tapered Rectangular with Double-Cut Faces | Tapered Round with Double-Cut Face |
Tapered Square with Double-Cut Faces | Thin-Tapered Rectangular with Double-Cut Faces | Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
Precision File Sets
 6-Piece Set |  Half Round |  Rectangular |  Round |
 Triangular |  Knife |
Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts.
| Finish No. | Includes | Container Type | For Use On | Each | |
6-Piece Sets | |||||
|---|---|---|---|---|---|
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg. One Medium-Finish Triangular File with Double-Cut Faces—6" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Fine-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 000000 |
| 4 | One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 000000 |
Needle Files
Straight Rectangular
Tapered Rectangular
Tapered Half Round
Tapered Round
Tapered Triangular
Tapered Square
Tapered Knife
Tapered Barrette
Tapered Crossing
Straight Joint
Straight Slitting
Tapered Marking
The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Half-round files can be used on concave, convex, and flat surfaces.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
Knife files get into tight angles, corners, and slots.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
For technical drawings and 3-D models, click on a part number.
| Lg. | Dia. | Wd. | Thick. | Face Tooth Style | Edge Tooth Style | For Use On | Each | |
For Medium Finish (No. 0) | ||||||||
|---|---|---|---|---|---|---|---|---|
Straight Rectangular | ||||||||
| 6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 000000 |
Tapered Rectangular | ||||||||
| 6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
| 6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
| 6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
| 6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
| 6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
| 6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
| 6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
| 6 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
| 6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
| 6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
| 6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
For Fine Finish (No. 2) | ||||||||
Straight Rectangular | ||||||||
| 6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Rectangular | ||||||||
| 6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
| 6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
| 6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
| 6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
| 6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
| 6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
| 6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
| 6 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
| 6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
| 6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
| 6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
For Extra Fine Finish (No. 4) | ||||||||
Straight Rectangular | ||||||||
| 6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Rectangular | ||||||||
| 6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
| 6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
| 6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
| 6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
| 6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
| 6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
| 6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
| 8 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
| 6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
| 6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
| 6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
Economy Needle File Sets
6-Piece Set
12-Piece Set
Rectangular
Tapered Half Round
Tapered Rectangular
Tapered Round
Tapered Square
Tapered Triangular
Joint
Slitting
Tapered Barrette
Tapered Crossing
Tapered Knife
Tapered Marking
These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
For technical drawings and 3-D models, click on a part number.
6-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
6-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
12-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
12-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
Needle File Sets
 |  Joint |  Rectangular |  Slitting |  Tapered Barrette |
 Tapered Crossing |  Tapered Half Round |  Tapered Knife |  Tapered Marking | |
 Tapered Rectangular |  Tapered Round |  Tapered Square |  Tapered Triangular |
These files are for frequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
For technical drawings and 3-D models, click on a part number.
12-Piece Sets—4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 6 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
Diamond Needle Files
Thin-Tapered Rectangular
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
For technical drawings and 3-D models, click on a part number.
For Coarse Finish (80-100 Grit) | For Medium Finish (120-150 Grit) | For Fine Finish (150-180 Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Diamond Surface Lg. | Lg. | Wd. | Thick. | For Use On | Each | Each | Each | |||
Thin Tapered Rectangular | ||||||||||
| 2.75" | 5 1/2" | 0.205" | 0.055" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |