Choose a Category
Clear All
Manufacturer Model Number ManufacturerModel Number | Show |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
|---|
Container Type Container Type |
|---|
 | Bottle |
Locking Strength Locking Strength |
|---|
|
Type Type |
|---|
|
Color Color |
|---|
 | Yellow |
Cure Type Cure Type |
|---|
|
Maximum Gap Size Filled Maximum Gap Size Filled |
|---|
|
Shear Strength Shear Strength |
|---|
|
Consistency Consistency |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Clarity Clarity |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Viscosity Viscosity |
|---|
|
Formulation Formulation |
|---|
|
Mixing Required Mixing Required |
|---|
|
About Structural Adhesives
More
Retaining Compounds for Close-Fitting Parts
Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Temp. Range, °F | Consistency | Viscosity, cP | Shear Strength, lbs./sq. in. | Color | Each | |
Medium Locking Strength | ||||||||||||
Loctite® Retaining Compounds | ||||||||||||
| 641 | 0.34 | Bottle | 0.008" | 20 min. | 24 hrs. | -65° to 300° | Thin Liquid | 600 | 940 | Yellow | 000000000 | 000000 |
| 641 | 1.69 | Bottle | 0.008" | 20 min. | 24 hrs. | -65° to 300° | Thin Liquid | 600 | 940 | Yellow | 000000000 | 00000 |