Choose a Category
Clear All
Manufacturer Model Number ManufacturerModel Number | Show |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
|---|
Container Type Container Type |
|---|
 | Stick |
Color Color |
|---|
 | Green |
Locking Strength Locking Strength |
|---|
|
Type Type |
|---|
|
Maximum Gap Size Filled Maximum Gap Size Filled |
|---|
|
Consistency Consistency |
|---|
|
Container Size Container Size |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Clarity Clarity |
|---|
|
Formulation Formulation |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Mixing Required Mixing Required |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Viscosity Viscosity |
|---|
|
Cure Type Cure Type |
|---|
|
Shear Strength Shear Strength |
|---|
|
About Structural Adhesives
More
Retaining Compounds for Close-Fitting Parts
Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Temp. Range, °F | Consistency | Viscosity, cP | Shear Strength, lbs./sq. in. | Color | Each | |
Medium Locking Strength | ||||||||||||
Loctite® Retaining Compounds | ||||||||||||
| 668 | 0.67 | Stick | 0.005" | 30 min. | 24 hrs. | -65° to 400° | Paste | Not Rated | 1,015 | Green | 0000000 | 000000 |