Filter by
Manufacturer Model Number
Shear Strength
Container Type
Manufacturer
Container Size
Cure Type
Adhesive Type
Mix Ratio
Fitting Connection
Viscosity
Type
Color
Formulation
Begins to Harden
Consistency
Maximum Temperature
Reaches Full Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Approximate Linear Coverage @ Bead Diameter
Peel Strength
Elongation
About Structural Adhesives
More
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These have two parts that must be mixed. The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Loctite® Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| E-60HP | 1.69 | Cartridge | 60 min. | 24 hrs. | 4,320 | Not Rated | 2:1 | Thick Liquid (45,000 cP) | -25° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
| E-60HP | 13.5 | Cartridge | 60 min. | 24 hrs. | 4,320 | Not Rated | 2:1 | Thick Liquid (45,000 cP) | -25° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |