For quick repairs, these epoxies begin to harden in 6 minutes or less.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Accommodate joint movement with these adhesives that remain pliable when cured.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

These thin liquids, also known as super glue, flow into small gaps.

For easy positioning, these adhesives begin to harden only when exposed to light.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Activators are required for no-mix acrylic structural adhesives to create adhesion.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Screw the gun onto a bottle of Loctite® threadlocker or retaining compound, then set the dial to control the amount being dispensed.

Prevent threaded fasteners from loosening due to shock and vibration.

Use these threadlockers on fasteners that require occasional fine-tuning, such as set screws.

Keep threaded fasteners from loosening at temperatures up to 450° F.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Paste threadlockers are easy to apply and won't drip, even from overhead fasteners.

These threadlockers withstand temperatures up to 450° F.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

Even on oily surfaces, these retaining compounds keep their hold.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Make castings and fill voids with these two-part pourable epoxies.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

All the benefits of gasketing adhesive in a no-drip form.

Dispense a uniform bead when you press the nozzle.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Dispense a uniform bead when you press the nozzle.

Push the plunger to precisely dispense small amounts.

Use cartridges with a standard caulk gun for quick and easy dispensing.

All the benefits of a gasket maker in a no-drip form.

No mixing required—these potting compounds come ready to apply.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

These coatings require an ultraviolet curing lamp to reach full strength.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.