Container Type Container Type |
|---|
 |  |
| Grease Gun Cartridge | Brush-Top Can |
 |  |
| Tube | Can |
 | |
| Aerosol Can |
Trade Name Trade Name |
|---|
For Use On For Use On |
|---|
Lubricant Type Lubricant Type |
|---|
|
Specifications Met Specifications Met |
|---|
|
Compatible With Compatible With |
|---|
|
|
About Lubricants
More
About Grease
More
Food Industry Grease
Use this grease in food-processing and preparation areas.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Loctite® LB 8104 Food Grade Anti-Seize—Silica Thickener | |||||||||
| 2 | Synthetic | 14.5 oz. | Grease Gun Cartridge | -40° to 450° | 480° | White | NSF Registered H1 | 0000000 | 000000 |
High-Pressure Grease
This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste.
Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Weld Load, kgf | Color | Each | |
Loctite® LB 8219 Extreme Pressure Grease—Aluminum Thickener | |||||||||
| 1 | Mineral | 14.5 oz. | Grease Gun Cartridge | -20° to 450° | 450° | 250 | Amber | 0000000 | 000000 |
Grease
Use this general-purpose grease to lubricate most machinery.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.
Grease with lithium thickener offers good heat and moisture resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Loctite® LB 8042 White Lithium Grease—Lithium Thickener | ||||||||
| 2 | Mineral | 1.5 oz. | Tube | -15° to 380° | 380° | White | 0000000 | 00000 |
Bearing Grease
This grease is wear resistant for use in a wide range of bearing types.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Loctite® Krytox™ RFE PFPE grease handles extreme temperature swings, resists aggressive chemicals and oxygen, and is long lasting. LB 8209 resists moisture. LB 8213 can be used under high loads.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Loctite® Krytox™ RFE PFPE LB 8213—PTFE Thickener | ||||||||
| 2 | Synthetic | 2 oz. | Tube | -15° to 500° | Not Rated | White | 0000000 | 000000 |
| 2 | Synthetic | 16 oz. | Grease Gun Cartridge | -15° to 500° | Not Rated | White | 000000 | 000000 |
Loctite® Krytox™ RFE PFPE LB 8209—PTFE Thickener | ||||||||
| 2 | Synthetic | 16 oz. | Grease Gun Cartridge | -15° to 500° | Not Rated | White | 0000000 | 000000 |
Electrical-Insulating Grease
Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.
Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease lubricates most efficiently below the maximum temperature.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp. | Dielectric Strength, V/mil | Color | Each | |
Loctite® LB 8423 Dielectric Grease—Silica Thickener | |||||||||
| 3 | Synthetic | 0.3 oz. | Tube | -65° to 400° | Not Rated | 500 | Clear | 0000000 | 00000 |
Seal and O-Ring Grease
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Loctite® Krytox™ RFE PFPE LB 8209 handles extreme temperature swings, resists acids, bases, and fuels, and is long lasting. It can be used under high loads.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Loctite® Krytox™ RFE PFPE LB 8209—PTFE Thickener | ||||||||
| 2 | Synthetic | 2 oz. | Tube | -15° to 500° | Not Rated | White | 0000000 | 000000 |
Metal-Free Food Industry Antiseize Lubricants
Free of metal particles, these lubricants prevent abrasive wear when used on stainless steel and other sensitive metal. They are NSF registered H1 for incidental food contact. All are white for a clean appearance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Corrosion-Resistant Antiseize Lubricants
Corrosion-resistant additives allow these lubricants to withstand caustic environments, such as steel mills and power plants. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants with aluminum and with copper have good heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent heat resistance. Loctite® Silver Grade Anti-Seize can be used with fine threads. Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Loctite® LB 8150 Silver Grade Anti-Seize | ||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907F | Aluminum, Brass, Copper, Steel | 0000000 | 000000 |
Loctite® LB 8151 AE Silver Grade Anti-Seize | ||||||||
| 12 oz. | Aerosol Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907F | Aluminum, Brass, Copper, Steel | 0000000 | 00000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Loctite® LB 8150 Silver Grade Anti-Seize | |||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907F | Aluminum, Brass, Copper, Steel | 12 | 00000000 | 0000000 |
Loctite® LB 8151 AE Silver Grade Anti-Seize | |||||||||
| 12 oz. | Aerosol Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907F | Aluminum, Brass, Copper, Steel | 12 | 00000000 | 000000 |