Filter by
Manufacturer Model Number
Container Type
Manufacturer
Shear Strength
Formulation
Begins to Harden
Elongation
Container Size
Type
Peel Strength
Cure Type
Adhesive Type
Viscosity
Maximum Temperature
Color
Approximate Linear Coverage @ Bead Diameter
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Fitting Connection
REACH
RoHS
Consistency
Mix Ratio
Minimum Temperature
About Structural Adhesives
More
High-Strength Acrylic Structural Adhesives
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
| H3000 | 1.69 | Cartridge | 5 min. | 24 hrs. | 4,150 | 45 | 1:1 | Thick Liquid (45,000 cP) | -65° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
| H3000 | 13.5 | Cartridge | 5 min. | 24 hrs. | 4,150 | 45 | 1:1 | Thick Liquid (45,000 cP) | -65° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 00000 |
Mixer Nozzles, Plungers, and Dispensing Guns