Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with copper have good corrosion and heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance.

Loctite® LB N-1000 High Purity Anti-Seize is made of highly pure ingredients in a controlled environment for superior corrosion resistance. Use it with stainless steel components.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with calcium sulfonate work well in high-humidity and marine applications. Lubricants with aluminum are white, so they can be used in areas where cleanliness is a concern.

Corrosion-resistant additives allow these lubricants to withstand caustic environments, such as steel mills and power plants. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with aluminum and with copper have good heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent heat resistance. Lubricants with zinc are nonabrasive for use with soft metal.

Loctite® Silver Grade Anti-Seize can be used with fine threads. Lubricants in a stick won’t run or drip.

Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Loctite® C5-A Copper-Based Anti-Seize lubricants can be used with salt water and petroleum-based chemicals. LB 8065 comes as a stick for no-mess application.

Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Free of metal particles, these lubricants prevent abrasive wear when used on stainless steel and other sensitive metal. They are NSF registered H1 for incidental food contact. All are white for a clean appearance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. They're made with moly to withstand heavy loads and pressure. They can handle low-speed loads at temperatures up to 745° F and static loads up to 2400° F. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Loctite® LB 8017 Moly Dry Film can also be used with chain and other moving metal parts.

Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic.

This grease is wear resistant for use in a wide range of bearing types.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Grease with PTFE thickener has good heat, moisture, and oxidation resistance.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Loctite® Krytox™ RFE PFPE grease handles extreme temperature swings, resists aggressive chemicals and oxygen, and is long lasting. LB 8209 resists moisture. LB 8213 can be used under high loads.

Use this grease in food-processing and preparation areas.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.

Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Grease lubricates most efficiently below the maximum temperature.