These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000

Pourable Surface Fillers

Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Steel Liquid
EA 3472	1	Can	25	24	Thick Liquid	4:1	50 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	0000000	000000
EA 3472	4	Can	25	24	Thick Liquid	4:1	200 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	0000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Specifications Met		Each
Loctite® Fixmaster Metal Magic Steel
EA 3463	4	Stick	3	24 hrs.	Putty	10 sq. in. @ 1/4"	1"	Yes	-20° to 250°	Gray	Sand	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	NSF/ANSI 61	0000000	000000
Loctite® Fixmaster Underwater Repair Epoxy
EA 9490	4	Stick	15	60 min.	Putty	16 sq. in. @ 1/4"	1/4"	Yes	Not Rated to 300°	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood	__	0000000	00000

Surface Fillers for Metal

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.

Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.

Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Aluminum Liquid
PC 3466	1 lbs.	Jar, Can	20	24	Thick Liquid	5:1	60 sq. in. @ 1/4"	-20° to 200°	Gray	Machine, Drill, Tap	Aluminum	0000000	0000000
Loctite® Fixmaster Aluminum Putty
PC 7254	1 lbs.	Jar	20	24	Paste	4:1	70 sq. in. @ 1/4"	-20° to 200°	Gray	Machine, Drill, Tap	Aluminum	0000000	00000
Loctite® Fixmaster Steel Putty
EA 3471	1 lbs.	Jar	30	24	Thick Liquid	2.5:1	40 sq. in. @ 1/4"	-20° to 220°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
EA 3473	1 lbs.	Jar	3	24	Paste	1:1	50 sq. in. @ 1/4"	-20° to 190°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
PC 235642	4 lbs.	Can	30	24	Paste	2.5:1	170 sq. in. @ 1/4"	-20° to 220°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	000000
Loctite® Fixmaster Steel Epoxy
PC 3965	1.7 oz.	Cartridge	3	7	Paste	1:1	57 sq. in. @ 1/4"	-20° to 200°	Gray	Machine, Drill, Sand, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	000000	00000
Loctite® Fixmaster Stainless Steel Putty
EA 3476	1 lbs.	Jar	20	24	Paste	4:1	30 sq. in. @ 1/4"	-20° to 220°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000

Air-Powered Dispensing Gun for Loctite® Fixmaster Steel Epoxy	000000000	Each	0000000
Dispensing Gun for Loctite® Fixmaster Steel Epoxy	0000000	Each	00000

Fine-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Wear Resistant Putty
PC 7222	1	Jar	30	24	Putty	2:1	50 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000
Loctite® Nordbak Pneu-Wear
PC 7317	3	Can	30	6	Paste	4:1	150 sq. in. @ 1/4"	1/4"	Yes	-20° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	000000
PC 7317	25	Pail, Can	30	6	Paste	4:1	1,240 sq. in. @ 1/4"	1/4"	Yes	-20° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	000000
PC 7455	6	Can	10	3	Paste	2:1	310 sq. in. @ 1/4"	1/4"	Yes	-20° to 220°	Blue	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000

Large-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Nordbak Wearing Compound
PC 7218	5	Jar, Can	30	7	Paste	2:1	260 sq. in. @ 1/4"	1/4"	-15° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	0000000
PC 7218	25	Pail, Can	30	7	Paste	2:1	1,240 sq. in. @ 1/4"	1/4"	-15° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	000000
PC 7357	6	Jar, Can	25	8	Paste	2:1	310 sq. in. @ 1/4"	1/4"	-20° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000
PC 9599	6	Jar, Can	10	3	Paste	2:1	310 sq. in. @ 1/4"	1/4"	-20° to 220°	Blue	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	000000

Impact-Resistant Surface Fillers for Metal

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Nordbak High Impact Wearing Compound
PC 9313	25	Pail, Can	30	6	Paste	2:1	1,240 sq. in. @ 1/4"	1/4"	Yes	-20° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	0000000

Chemical-Resistant Surface Fillers for Metal

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Superior Metal
EA 3478	1 lbs.	Jar	20	24 hrs.	Paste	4:1	30 sq. in. @ 1/4"	1"	Yes	-20° to 250°	Gray	Machine, Drill	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	0000000