Even on oily surfaces, these retaining compounds keep their hold. Use them to fill gaps up to 0.015" to secure worn cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air. They meet NSF/ANSI 61 safety standards for use with drinking water systems.

Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

Apply this thread sealant stick without a mess. It contains PTFE, which provides a slippery surface that keeps threads from binding. Since the sealant is anaerobic, it doesn’t begin to harden until coated surfaces are threaded together, blocking exposure to air. It has low locking strength, so it prevents threads from loosening due to vibration and can be adjusted without tools. It meets NSF/ANSI 61 for use with drinking water.

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

Sealants with high locking strength work in demanding applications, such as securing mounting studs in motor housings. They require both heat and a hand tool to unthread.