Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Apply this thread sealant stick without a mess.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Accommodate joint movement with these adhesives that remain pliable when cured.

In especially damp or humid environments, these adhesives keep their hold.

Form bonds without the strong odor of other instant-bond adhesives.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

These thin liquids, also known as super glue, flow into small gaps.

For easy positioning, these adhesives begin to harden only when exposed to light.

Specially formulated for plastics, these threadlockers secure nylon, PTFE, and other plastic threaded fasteners.

These low-friction threadlockers harden slowly, allowing ample time to smoothly adjust multiple large bolts for even clamping.

These threadlockers meet NSF/ANSI 61 for drinking water.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

This thick paste withstands temperatures up to 650 °F.

Wrap this no-mess tape around threaded fasteners up to 30 days before installation.

These threadlockers withstand temperatures up to 450° F.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Even on oily surfaces, these retaining compounds keep their hold.

No mixing required—these potting compounds come ready to apply.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

These coatings require an ultraviolet curing lamp to reach full strength.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

Create flexible seals that never fully harden.

All the benefits of gasketing adhesive in a no-drip form.

Form bonds that will not degrade in the presence of oils and fuels.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Make castings and fill voids with these two-part pourable epoxies.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.