Cut Direction Cut Direction |
|---|
 | Right Hand |
 | Neutral |
 | Left Hand |
Cut Type Cut Type |
|---|
 |  |
| Along-the- Length Turning | Chamfering |
 |  |
| Facing | External Profiling |
For Insert Code For Insert Code |
|---|
Shank Type Shank Type |
|---|
 |  |
| Square | Rectangular |
Holder Code Holder Code |
|---|
--41a096a29da1602001744-p9@1x_637375809502281682.png?ver=ImageNotFound)
Insert Holding Method Insert Holding Method |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Clamp Reference Number Clamp Reference Number |
|---|
|
Turning Carbide Insert Holders
Pair these holders with an ANSI standard carbide insert (sold separately). When one edge of the insert dulls, rotate it to use another edge. Right-hand holders cut from right to left, left-hand holders cut from left to right, and neutral holders can cut in either direction.
M series holders are good general-purpose holders. They are best for roughing cuts but can also perform medium and finishing cuts.
D series holders have a wedge-style clamping system that provides an extremely rigid hold for reduced chatter and extended tool life. These holders are best for medium cuts but can also perform roughing and finishing operations.
C series holders are best for medium cuts and can also be used for finishing.
S series holders are best for finishing operations but can also be used for medium cuts.
Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.
MCLN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNMG-542 CNMG-543 CNMG-544 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNMG-542 CNMG-543 CNMG-544 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MCLN Holders
CNMG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 00000 | 0000 |
Inserts for MCLN Holders
CNGG
CNMG
CNGG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Uncoated | __ | 00000000 | 000000 | 000000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.42" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.57" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.57" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MDJN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and External Profiling
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 0000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 0000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MDJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MDJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MDPN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, and External Profiling
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Neutral | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MDPN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MDPN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MRGN Holders with Offset Shank—For Along-the-Length Turning, and Chamfering
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | RNMG-43 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | RNMG-43 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | RNMG-43 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | RNMG-43 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MRGN Holders
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||
| RNMG-43 | 1/2" | 3/16" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||
| RNMG-43 | 1/2" | 3/16" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MRGN Holders
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||
| RNMG-43 | 1/2" | 3/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Steel | ||||||||
| RNMG-43 | 1/2" | 3/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MSDN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, and Facing
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Neutral | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | SNMG-431 SNMG-432 SNMG-433 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | SNMG-431 SNMG-432 SNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MSDN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.5" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.5" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MSDN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| SNMG-431 | 1/2" | 3/16" | 0.48" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
| SNMG-432 | 1/2" | 3/16" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.47" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| SNMG-433 | 1/2" | 3/16" | 0.34" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| SNMG-431 | 1/2" | 3/16" | 0.48" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SNMG-432 | 1/2" | 3/16" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SNMG-433 | 1/2" | 3/16" | 0.45" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| SNMG-431 | 1/2" | 3/16" | 0.48" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SNMG-432 | 1/2" | 3/16" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SNMG-433 | 1/2" | 3/16" | 0.45" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MTAN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | |||||||||||
| Wd. | Ht. | O'all Lg. | End Cutting Edge Angle | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | ||||||||||||||||
| 5/8" | 5/8" | 4 1/2" | 15° | TNMG-321 TNMG-322 | 3/8" | 1/8" | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | __ | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | ||||||||||||||||
| 5/8" | 5/8" | 4 1/2" | 15° | TNMG-321 TNMG-322 | 3/8" | 1/8" | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | __ | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MTAN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MTAN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MTEN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Neutral | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | TNMG-321 TNMG-322 | 3/8" | 1/8" | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MTEN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MTEN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MTGN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | |||||||||||
| Wd. | Ht. | O'all Lg. | End Cutting Edge Angle | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | ||||||||||||||||
| 3/4" | 3/4" | 4 1/2" | __ | TNMG-321 TNMG-322 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | 27° | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | ||||||||||||||||
| 3/4" | 3/4" | 4 1/2" | __ | TNMG-321 TNMG-322 | 3/8" | 1/8" | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | 27° | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MTGN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MTGN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MTJN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | TNMG-321 TNMG-322 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | TNMG-321 TNMG-332 | 3/8" | 3/16" | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | TNMG-321 TNMG-322 | 3/8" | 1/8" | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | TNMG-321 TNMG-332 | 3/8" | 3/16" | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | TNMG-431 TNMG-432 TNMG-433 TNMG-434 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MTJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.62" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MTJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TNMG-321 | 3/8" | 1/8" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-331 | 3/8" | 3/16" | 0.63" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-431 | 1/2" | 3/16" | 0.85" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-433 | 1/2" | 3/16" | 0.82" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TNMG-434 | 1/2" | 3/16" | 0.8" | 1/16" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MVJN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Inserts for MVJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| VNMG-331 | 3/8" | 3/16" | 0.64" | 1/64" | Medium | Uncoated | __ | 00000000 | 000000 | 000000 |
| VNMG-332 | 3/8" | 3/16" | 0.09" | 1/32" | Finishing | Uncoated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| VNMG-331 | 3/8" | 3/16" | 0.64" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| VNMG-331 | 3/8" | 3/16" | 0.64" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MVVN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, and External Profiling
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Neutral | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | VNMG-331, VNMG-332 | 3/8" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Inserts for MVVN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.09" | 1/32" | Finishing | Uncoated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Stainless Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MWLN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 1" | 1" | 6" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
| 1" | 1" | 6" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
Economy Inserts for MWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DCLN Holders with Offset Shank—For Along-the-Length Turning and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNMG-543 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNMG-543 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000 |
Economy Inserts for DCLN Holders
CNMG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 00000 | 0000 |
Inserts for DCLN Holders
CNGG
CNMG
CNGG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Uncoated | __ | 00000000 | 000000 | 000000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DDJN Holders with Offset Shank—For External Profiling
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | DNMG-332 | 3/8" | 3/16" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 | 00000000 | 00000 |
| 1" | 1" | 6" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
Left Hand | |||||||||||||||
| 1" | 1" | 6" | DNMG-431, DNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
Economy Inserts for DDJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| DNMG-432 | 1/2" | 3/16" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for DDJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| DNMG-431 | 1/2" | 3/16" | 0.59" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DNMG-432 | 1/2" | 3/16" | 0.58" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DSDN Holders with Straight Shank—For Along-the-Length Turning
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Neutral | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | SNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | SNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
Economy Inserts for DSDN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.5" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.5" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for DSDN Holders
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Hole Dia. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | |||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | |||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | |||||||||||
| SNMG-432 | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DTGN Holders with Offset Shank—For Along-the-Length Turning
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 1" | 1" | 6" | TNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 1" | 1" | 6" | TNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
Inserts for DTGN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TNMG-432 | 1/2" | 3/16" | 0.83" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DWLN Holders with Offset Shank—For Along-the-Length Turning and External Profiling
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 1" | 1" | 6" | WNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 1" | 1" | 6" | WNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
Economy Inserts for DWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for DWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
CSBP Holders with Straight Shank—For Along-the-Length Turning and Chamfering
Right Hand
Left Hand
Holders | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Clips | Replacement Seats | Replacement Seat Screws | Replacement Clamp Screws | |||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | Each | ||||||
Right Hand | |||||||||||||||||
| 5/8" | 5/8" | 4 1/2" | SPG-322 | 3/8" | 1/8" | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 | 00000000 | 00000 |
Left Hand | |||||||||||||||||
| 3/4" | 3/4" | 4 1/2" | SPG-422 | 1/2" | 1/8" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Inserts for CSBP Holders
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | |||||||||
| SPG-322 | 3/8" | 1/8" | 0.34" | 1/32" | Finishing | Uncoated | 00000000 | 000000 | 000000 |
| SPG-422 | 1/2" | 1/8" | 0.47" | 1/32" | Finishing | Uncoated | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | |||||||||
| SPG-422 | 1/2" | 1/8" | 0.47" | 1/32" | Finishing | Uncoated | 00000000 | 00000 | 00000 |
CTAP Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Clips | Replacement Clamp Screws | Replacement Seats | Replacement Seat Screws | |||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | Each | ||||||
Right Hand | |||||||||||||||||
| 3/4" | 3/4" | 4 1/2" | TPG-322 TPG-323 TPU-322 TPU-323 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
Left Hand | |||||||||||||||||
| 3/4" | 3/4" | 4 1/2" | TPG-322 TPG-323 TPU-322 TPU-323 | 3/8" | 1/8" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
Economy Inserts for CTAP Holders
TPG
TPG
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | |||||||||
| TPG-322 | 3/8" | 1/8" | 0.65" | 1/32" | Medium | Uncoated | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | |||||||||
| TPG-322 | 3/8" | 1/8" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | 0000000 | 0000 | 0000 |
Inserts for CTAP Holders
TPG
TPU
TPG
TPU
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TPU-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 0000 |
| TPU-323 | 3/8" | 1/8" | 0.6" | 3/64" | Finishing | Uncoated | __ | 00000000 | 00000 | 0000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TPU-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TPU-323 | 3/8" | 1/8" | 0.6" | 3/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TPU-323 | 3/8" | 1/8" | 0.6" | 3/64" | Finishing | Titanium Carbonitride (TiCN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
CTCO Holders with Straight Shank—For Along-the-Length Turning and Chamfering
Holders | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Clips | Replacement Clamp Screws | Replacement Seats | Replacement Seat Screws | |||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | Each | ||||||
Neutral | |||||||||||||||||
| 1/2" | 1/2" | 3 1/2" | TPG-322 TPG-323 TPU-322 TPU-323 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 1/2" | 1" | 8" | TPG-322 TPG-323 TPU-322 TPU-323 | 3/8" | 1/8" | 0000000 | 000000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 | 0000000 | 00000 |
| 3/4" | 1" | 8" | TPG-432 TPU-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for CTCO Holders
TPG
TPG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.65" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for CTCO Holders
TPG
TPU
TPG
TPU
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.6" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TPG-432 | 1/2" | 3/16" | 0.84" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TPU-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 0000 |
| TPU-432 | 1/2" | 3/16" | 0.83" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TPG-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TPU-322 | 3/8" | 1/8" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TPU-432 | 1/2" | 3/16" | 0.83" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
CTFP Holders with Offset Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Clips | Replacement Clamp Screws | Replacement Seats | Replacement Seat Screws | |||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | Each | ||||||
Right Hand | |||||||||||||||||
| 1" | 1" | 6" | TPG-432 TPU-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||||
| 1" | 1" | 6" | TPG-432 TPU-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Inserts for CTFP Holders
TPG
TPU
TPG
TPU
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TPG-432 | 1/2" | 3/16" | 0.84" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
| TPU-432 | 1/2" | 3/16" | 0.83" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TPU-432 | 1/2" | 3/16" | 0.83" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
SCLC Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Torx Screws | Replacement Torx Keys | ||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | |||
Right Hand | |||||||||||
| 3/8" | 3/8" | 3 1/2" | CCMT-21.50.5, CCMT-21.51, CCMT-21.52 | 1/4" | 3/32" | 00000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 1/2" | 1/2" | 4" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5/8" | 5/8" | 4 1/2" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1" | 6" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | |||||||||||
| 3/8" | 3/8" | 3 1/2" | CCMT-21.50.5, CCMT-21.51, CCMT-21.52 | 1/4" | 3/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2" | 1/2" | 4" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5/8" | 5/8" | 4 1/2" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1" | 6" | CCMT-32.50.5, CCMT-32.51, CCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Economy Inserts for SCLC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| CCMT-21.51 | 1/4" | 3/32" | 0.25" | 1/64" | Finishing | Uncoated | __ | 0000000 | 00000 | 00000 |
| CCMT-32.51 | 3/8" | 5/32" | 0.38" | 1/64" | Finishing | Uncoated | __ | 0000000 | 0000 | 0000 |
| CCMT-32.52 | 3/8" | 5/32" | 0.38" | 1/32" | Finishing | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| CCMT-21.51 | 1/4" | 3/32" | 0.25" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CCMT-32.51 | 3/8" | 5/32" | 0.38" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CCMT-32.52 | 3/8" | 5/32" | 0.38" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for SCLC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| CCMT-21.50.5 | 1/4" | 3/32" | 0.25" | 0.008" | Finishing | Uncoated | __ | 00000000 | 000000 | 00000 |
| CCMT-21.51 | 1/4" | 3/32" | 0.24" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-21.52 | 1/4" | 3/32" | 0.22" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.50.5 | 3/8" | 5/32" | 0.37" | 0.008" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| CCMT-21.51 | 1/4" | 3/32" | 0.24" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CCMT-21.52 | 1/4" | 3/32" | 0.22" | 1/32" | Medium | Uncoated | __ | 00000000 | 0000 | 0000 |
| CCMT-32.51 | 3/8" | 5/32" | 0.37" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CCMT-32.52 | 3/8" | 5/32" | 0.35" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| CCMT-21.50.5 | 1/4" | 3/32" | 0.25" | 0.008" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-21.51 | 1/4" | 3/32" | 0.24" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 0000 |
| CCMT-21.52 | 1/4" | 3/32" | 0.22" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 0000 |
| CCMT-32.50.5 | 3/8" | 5/32" | 0.37" | 0.008" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.51 | 3/8" | 5/32" | 0.37" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.52 | 3/8" | 5/32" | 0.35" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| CCMT-21.50.5 | 1/4" | 3/32" | 0.25" | 0.008" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-21.51 | 1/4" | 3/32" | 0.24" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-21.52 | 1/4" | 3/32" | 0.22" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.50.5 | 3/8" | 5/32" | 0.37" | 0.008" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.51 | 3/8" | 5/32" | 0.37" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CCMT-32.52 | 3/8" | 5/32" | 0.35" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
SDJC Holders with Offset Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Left Hand
Holders | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Torx Screws | Replacement Torx Keys | ||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | |||
Right Hand | |||||||||||
| 3/8" | 3/8" | 3 1/2" | DCMT-21.50.5, DCMT-21.51 | 1/4" | 3/32" | 00000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 1/2" | 1/2" | 4" | DCMT-21.50.5, DCMT-21.51 | 1/4" | 3/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2" | 1/2" | 4" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5/8" | 5/8" | 4 1/2" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | |||||||||||
| 3/8" | 3/8" | 3 1/2" | DCMT-21.50.5, DCMT-21.51 | 1/4" | 3/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2" | 1/2" | 4" | DCMT-21.50.5, DCMT-21.51 | 1/4" | 3/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2" | 1/2" | 4" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5/8" | 5/8" | 4 1/2" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | DCMT-32.51, DCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Economy Inserts for SDJC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| DCMT-21.51 | 1/4" | 3/32" | 0.3" | 1/64" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| DCMT-32.51 | 3/8" | 5/32" | 0.42" | 1/64" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
| DCMT-32.52 | 3/8" | 5/32" | 0.42" | 1/32" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| DCMT-21.51 | 1/4" | 3/32" | 0.3" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| DCMT-32.51 | 3/8" | 5/32" | 0.42" | 1/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| DCMT-32.52 | 3/8" | 5/32" | 0.42" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for SDJC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| DCMT-21.50.5 | 1/4" | 3/32" | 0.3" | 0.008" | Finishing | Uncoated | __ | 00000000 | 000000 | 00000 |
| DCMT-21.51 | 1/4" | 3/32" | 0.29" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| DCMT-21.51 | 1/4" | 3/32" | 0.29" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| DCMT-32.51 | 3/8" | 5/32" | 0.44" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| DCMT-32.52 | 3/8" | 5/32" | 0.43" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| DCMT-21.50.5 | 1/4" | 3/32" | 0.3" | 0.008" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DCMT-21.51 | 1/4" | 3/32" | 0.29" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 0000 |
| DCMT-32.51 | 3/8" | 5/32" | 0.44" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DCMT-32.52 | 3/8" | 5/32" | 0.43" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| DCMT-21.50.5 | 1/4" | 3/32" | 0.3" | 0.008" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DCMT-21.51 | 1/4" | 3/32" | 0.29" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DCMT-32.51 | 3/8" | 5/32" | 0.44" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| DCMT-32.52 | 3/8" | 5/32" | 0.43" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
SSDC Holders with Straight Shank—For Along-the-Length Turning, Chamfering, and Facing
Holders | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Torx Screws | Replacement Torx Keys | ||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | |||
Neutral | |||||||||||
| 1/2" | 1/2" | 4" | SCMT-32.51, SCMT-32.52 | 3/8" | 5/32" | 00000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 5/8" | 4 1/2" | SCMT-32.51, SCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | SCMT-32.51, SCMT-32.52 | 3/8" | 5/32" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Economy Inserts for SSDC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| SCMT-32.52 | 3/8" | 5/32" | 0.38" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| SCMT-32.52 | 3/8" | 5/32" | 0.38" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for SSDC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| SCMT-32.51 | 3/8" | 5/32" | 0.36" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
| SCMT-32.52 | 3/8" | 5/32" | 0.34" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| SCMT-32.51 | 3/8" | 5/32" | 0.36" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 0000 |
| SCMT-32.52 | 3/8" | 5/32" | 0.34" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| SCMT-32.51 | 3/8" | 5/32" | 0.36" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SCMT-32.52 | 3/8" | 5/32" | 0.34" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| SCMT-32.51 | 3/8" | 5/32" | 0.36" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| SCMT-32.52 | 3/8" | 5/32" | 0.34" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
STAC Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Economy Inserts for STAC Holders
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | |||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Uncoated | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | |||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Titanium Nitride (TiN) Coated | 0000000 | 0000 | 0000 |
Inserts for STAC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
STEC Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Economy Inserts for STEC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for STEC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
STNC Holders with Straight Shank—For Along-the-Length Turning, Chamfering, External Profiling, and Facing
Right Hand
Economy Inserts for STNC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| TCMT-32.52 | 3/8" | 5/32" | 0.59" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for STNC Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| TCMT-32.51 | 3/8" | 5/32" | 0.63" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| TCMT-32.52 | 3/8" | 5/32" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
SVJB Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and External Profiling
Right Hand
Left Hand
Holders | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Torx Screws | Replacement Torx Keys | ||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | |||
Right Hand | |||||||||||
| 3/4" | 3/4" | 4 1/2" | VBMT-331, VBMT-332 | 3/8" | 3/16" | 00000000 | 0000000 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 1" | 6" | VBMT-331, VBMT-332 | 3/8" | 3/16" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | |||||||||||
| 3/4" | 3/4" | 4 1/2" | VBMT-331, VBMT-332 | 3/8" | 3/16" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1" | 6" | VBMT-331, VBMT-332 | 3/8" | 3/16" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Economy Inserts for SVJB Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| VBMT-332 | 3/8" | 3/16" | 0.57" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| VBMT-332 | 3/8" | 3/16" | 0.57" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 00000 | 0000 |
Inserts for SVJB Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| VBMT-331 | 3/8" | 3/16" | 0.64" | 1/64" | Medium | Uncoated | __ | 00000000 | 000000 | 000000 |
| VBMT-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| VBMT-331 | 3/8" | 3/16" | 0.64" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| VBMT-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| VBMT-331 | 3/8" | 3/16" | 0.64" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| VBMT-332 | 3/8" | 3/16" | 0.62" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |