Low-Profile Hydraulic Bottle Jacks
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | |
| 5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 |
| 5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 5 1/8"-6 3/8" | 1 3/16" | 2 1/8" | 4 3/4" | __ | __ | 23 7/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 |
Two-Height Hydraulic Jacks
These jacks are as versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Lg. | Wd. | Movement | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 2 | 4,000 | 4 1/2" | 5/8"-5 1/8" | 2" | 2" | 9 1/4"-13 3/4" | 3 1/2" | 2 3/8" | Rigid | 5" | 7" | 11 1/2" | Steel | __ | 0000000 | 000000000 |
| 5 | 10,000 | 4 5/8" | 1"-5 5/8" | 2 1/4" | 3" | 11 1/2"-16 1/8" | 4 3/4" | 3 3/8" | Rigid | 7 1/8" | 10 5/8" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
| 10 | 20,000 | 5 5/8" | 1 1/8"-6 3/4" | 2 3/8" | 3 1/4" | 12 7/8"-18 1/2" | 5 3/4" | 4 5/8" | Rigid | 8 5/8" | 11 1/4" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
Hydraulic Jacks with Wheels
Roll these jacks from job to job and under hard-to-reach places.
Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Movement | Dia. | Wd. | Lg. | Ht. | Handle Lg. | Body Material | Configuration | Material | Each | |
Flat Saddle | ||||||||||||||
| 2 | 4,000 | 3 1/2"-18 1/2" | 15" | Rigid | 4 1/2" | 11 3/4" | 25 3/4" | 6" | 45" | Aluminum | Two Swivel and Two Rigid Casters | Steel | 0000000 | 0000000 |
Hydraulic Jacks
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Collar Thread Size | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 10,000 | 1 1/2" | 1 1/2"-16 | 1 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 000000000 |
| 10 | 20,000 | 4 3/4"-6 7/8" | 2 1/8" | 10,000 | 2 1/4" | 2 1/4"-14 | 4.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 10,000 | 2 1/4" | 2 1/4"-14 | 4.2 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | 15.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | 15.8 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 10,000 | 4 7/8" | __ | 22.9 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
Hydraulic Scissor Jacks
Fit these compact jacks under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4 3/4" Min. Ht. | Capacity @ 10 1/4" Max. Lift | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Movement | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 7/8 | 1,750 | 7/8 | 1,750 | 4 3/4"-15" | 10 1/4" | 15 1/2" | Rigid | 1 15/16" | 1 7/16" | 4 5/16" | 4 1/4" | 14 3/4" | Steel | Removable Handle | 00000000 | 0000000 |
Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Lift | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Wrench-Adjustable Screw Jacks
Use these low-profile jacks in confined spaces. The screw adjustment lets you make small changes to the height of your load.
Jack with rigid saddle is also known as a spreader jack.
Jacks with swivel saddle keep loads from slipping. Also known as planer jacks, they have a side locking screw that keeps the jack extended and prevents lowering due to vibration.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Swivel Angle | Base Wd. | Body Material | Each | |
With Rigid Saddle | |||||||||
| 3 | 6,000 | 3"-4" | 1" | 1 1/2" | __ | 2" | Steel | 0000000 | 0000000 |
With Swivel Saddle | |||||||||
| 2 | 4,000 | 2 3/4"-3 3/4" | 1" | 1 1/4" | 25° | 2 3/8" | Iron | 000000 | 000000 |
| 4 | 8,000 | 3 3/4"-5 1/4" | 1 1/2" | 1 3/4" | 25° | 3 1/8" | Iron | 000000 | 000000 |
| 6 | 12,000 | 5 1/4"-7 1/2" | 2 1/4" | 2 1/8" | 25° | 4" | Iron | 000000 | 000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1 3/4"-8 3/4" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000000 |
| 5 | 10,000 | 10" | 1 3/4"-11 3/4" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 5 | 10,000 | 13" | 1 3/4"-14 3/4" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1 5/8"-11 1/8" | 2 3/8" | 1 1/8" | 17 1/4"-26 3/4" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2 1/4"-15" | 2 5/8" | 2 1/4" | 23 1/4"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2 1/4"-20 1/4" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Air-Powered Lifting Bags
Use these rugged rubber lifting bags under heavy loads with less than 1 1/8" of clearance. They also work well on soft surfaces and under water. To increase lift height, stack with an additional bag.
Lifting Bags | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Base | Air Inlet | Replacement Bags | |||||||||||
| tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Max. Pressure, psi | Coupling Type | Pipe Size | Gender | Material | Each | Each | ||
| 1.1 | 2,200 | 1 1/8"-3" | 2.7" | 6" | 6" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 000000000 | 000000000 | 0000000 |
| 3.1 | 6,200 | 1 1/8"-5" | 5.1" | 9" | 9" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 000000 |
| 6.1 | 12,200 | 1 1/8"-6 1/4" | 5.9" | 12" | 12" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
| 10.8 | 21,600 | 1 1/8"-8 1/4" | 7" | 15" | 15" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
| 14.2 | 28,400 | 1 1/8"-9 3/4" | 8.6" | 18" | 18" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
| 22.7 | 45,400 | 1 1/8"-11 3/4" | 10.6" | 22" | 22" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
| 35.3 | 70,600 | 1 3/16"-15" | 14.1" | 27" | 27" | 116 | Quick Disconnect | 3/8 | Male | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
| Replacement Hose | 000000000 | Each | 0000000 |
Air-Powered Hydraulic Lifting Jacks with Wheels
Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Type | Movement | Dia. | Lg. | Wd. | Ht. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Wheel Material | Each | |
| 22 | 44,000 | 9 3/4"-19 1/4" | 9 1/2" | Flat | Rigid | 2" | 22 7/8" | 12 1/2" | 7" | 48 3/4" | 110-150 | 3 | Quick-Disconnect | 1/4 | Male | Steel | Plastic | 00000000 | 0000000 |