Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.

Make guardrails, poles, and other safety equipment stand out in low-light environments.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone.

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.

Also known as conformal coatings, these coatings protect circuit boards and other electronics from moisture, dust, and static.

Hide proprietary information on electrical components while also protecting them from moisture, dust, and static. All it takes is a single thin layer of these black coatings.

High humidity, harsh chemicals, water submersions, and salt are no match for these electronic coatings.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

In just 20 seconds under a UV light, these urethane compounds form into a strong protective layer on electrical components.

Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat.

Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments.

Protect circuit boards and other electronics from fire and heat.

Combine the flexibility of silicone with the durability of standard epoxy—these compounds are great for protecting sensitive electronics that need to flex or expand and contract.

Tested to meet ASTM E595, a standard used by NASA, these potting compounds release almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Use them to draw heat away from your components—they conduct heat better than standard potting compounds.

Make repairs or changes to electrical components after they’ve been potted. While most compounds are permanent, these form a gel that bonds to itself, so you can peel it off without damaging your equipment.

No mixing required—these potting compounds come ready to apply.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Make seals that support glass under heavy loads in equipment and buildings.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Seal joints and gaps in concrete.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.