Connect these brushes to oil reservoirs and flow adjustment valves to lubricate chain, gears, and conveyors.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Serve multiple lubrication points from a single location.

Manually adjust the flow of oil to a single lubrication point.

Deliver an equal amount of oil to multiple lubrication points at once.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

Set the cycle interval as well as the dispensing duration. This pump has a maximum flow of 0.1 oz. per second.

Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Dispense a fixed amount of oil by pumping the handle.

A needle dispensing tip provides fine control for lubricating small parts.

Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.

These dispensers have an opening for filling without removing the nozzle.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

These manual dispensers are more portable than air-powered dispensers.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Loc-Line hose to assemble and disassemble components.

Swivel the ball-socket connections to position these arms and then lock them in place.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

These nozzles handle coolant pressure up to 150 psi.

These nozzles handle coolant pressure up to 150 psi.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Dispense grease with the highest-pressure-rated gun we offer.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Dispense small amounts of grease with this compact gun.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

This gun comes filled with 2 oz. of lithium-thickened grease.

Dispense from grease guns into grease fittings and bare lubrication points.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Convert dispensing tips with male threads into quick-disconnect couplings.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Replace the dispensing tip on your filler pump.

Turn the metering pin to adjust flow rate.

Spring pressure ensures a constant flow of grease.

Lubricate single- and double-strand roller chain.

Apply lubricant to gear racks with a 14 1/2° pressure angle and a pitch of 16.

Dispense grease using compressed air.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Move grease-dispensing guns in any direction without kinking the outlet hose.

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

Spray liquids with these fillable bottles—the head twists on and off to make filling easy.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.

Assortments contain straight, 45° elbow, and 90° elbow fittings.

Use these fittings in tight spaces where protruding fittings won't work.

Prevent damage to bearing seals caused by over-lubrication—these fittings automatically stop grease flow when pressure is within the shut-off range.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. They're also known as hydraulic grease fittings.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.

Keep standard grease fittings free of dirt and moisture.

Access difficult-to-reach lubrication points from up to 10 ft. away.

Lubricate multiple points from a single location.

Drive these fittings into unthreaded holes.