Silicone Lubricants | McMaster-Carr

Clear All

	Container Type Container Type


Aerosol Can	Grease Gun Cartridge

Jug	One-Time-Use Pack

Pail	Spray Bottle

Tube

	Additive Additive	Show

Silicone

	Additive Additive	Hide

	For Use On For Use On

	Lubricant Type Lubricant Type

Dry-Film Lubricant

Grease

Mold-Release Lubricant

Penetrating Lubricant

	Trade Name Trade Name

3M Silicone

DuPont® Silicone Lubricant

LB 8801 Silicone

LPS Silicone

LU 210 Food Grade Dry
Silicone

LU 211 Food Grade Dry
Silicone

LU 910 Food Grade Silicone

Molykote 44 Medium High
Temperature

Molykote 111 Compound

Molykote 557 Silicone Dry
Film

MR 307 Heavy Duty Paintable
Release Agent

MR 309 Paintable Release
Agent

MR 315 Urethane & Styrene
Silicone Release Agent

	Manufacturer Manufacturer

	Environment Environment

Food and Beverage

	Specifications Met Specifications Met

FDA Compliant

NSF Registered

NSF/ANSI

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 499° F

500° to 999° F

	Container Size Container Size

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Minimum Temperature Minimum Temperature

-99° to 0° F

1° to 99° F

Not Rated

	Synthetic Oil Composition Synthetic Oil Composition

Silicone

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Color Color

	White
	Clear

	NLGI Viscosity Grade NLGI Viscosity Grade

2.5

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Base Oil Base Oil

Synthetic

	Thickener Thickener

Lithium

Silica

	Melting Temperature Melting Temperature

430° F

Nonmelting

Not Rated

	Compatible With Compatible With

Plastic

Rubber

	Electrical Properties Electrical Properties

Electrical Insulating

	Dielectric Strength Dielectric Strength

55 Products

About Lubricants

About Grease

Penetrating Lubricants

Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic. Lubricants with boron nitride last long and cure to a semi-dry film that resists corrosion from salt water and won’t wash off.

Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).

LPS

LPS Silicone dries to leave a clear, dry film that protects and lubricates. These silicone lubricants are NSF registered H1 for incidental food contact.

Each

Container
Size	Net Weight	Type	Additive	Temp. Range, °F	Specifications Met	Cannot Be Sold To		Each
LPS Silicone
__	13 oz.	Aerosol Can	Silicone	-40° to 390°	NSF Registered H1	Canada	00000000	000000
5 gal.	__	Pail	Silicone	-40° to 390°	NSF Registered H1	Canada	00000000	000000

Package

Container
Net Weight	Type	Additive	Temp. Range, °F	Specifications Met	Cannot Be Sold To	Pkg. Qty.		Pkg.
LPS Silicone
13 oz.	Aerosol Can	Silicone	-40° to 390°	NSF Registered H1	Canada	12	000000000	0000000

Sprayon

Sprayon LU 910 Food Grade Silicone withstands high temperatures.

Container					Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Sprayon LU 910 Food Grade Silicone
12	Aerosol Can	Silicone	-55° to 575°	CA, Canada	0000000	000000	12	0000000	0000000

DuPont

DuPont® Silicone Lubricant repels moisture and is nonstaining.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
DuPont® Silicone Lubricant
14	Aerosol Can	Boron Nitride, Silicone	-40° to 400°	00000000	00000	6	0000000	000000

3M Silicone dries fast and is nonstaining. It is FDA Compliant for incidental contact with food.

Each

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met		Each
3M Silicone
13.4	Aerosol Can	Silicone	-25° to 350°	FDA Compliant 21 CFR 178.3570	00000000	000000

Package

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met	Pkg. Qty.		Pkg.
3M Silicone
13.4	Aerosol Can	Silicone	-25° to 350°	FDA Compliant 21 CFR 178.3570	12	000000000	0000000

Loctite®

Loctite® LB 8801 Silicone seals, lubricates, protects, waterproofs, and electrically insulates equipment.

Container					Each		Package
Size, fl. oz.	Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
Loctite® LB 8801 Silicone
__	13	Aerosol Can	Silicone	-55° to 400°	00000000	000000	12	000000000	0000000
5.3	__	Tube	Silicone	-55° to 400°	00000000	00000	12	000000000	000000

Food Industry Penetrating Lubricants

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 or FDA compliant for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.

Lubricants with silicone are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces.

Container						Each		Package
Size	Net Weight	Type	Additive	Temp. Range, °F	Specifications Met		Each	Pkg. Qty.		Pkg.
Sprayon LU 210 Food Grade Dry Silicone
__	10 oz.	Aerosol Can	Silicone	-40° to 450°	NSF Registered H1	0000000	000000	12	0000000	0000000
14 fl. oz.	__	Spray Bottle	Silicone	-40° to 450°	NSF Registered H1	0000000	00000	12	0000000	000000
Lubricants
__	11 oz.	Aerosol Can	Silicone	-55° to 390°	NSF Registered H1	0000000	00000	12	00000000	000000

Food Industry Seal and O-Ring Grease

This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water. Formulated with silica thickener and silicone, it resists washing away and has excellent resistance to wear. Apply directly to seals and O-rings to prevent drying and cracking.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2.5 is between the consistencies of peanut butter and vegetable shortening.

Grease lubricates most efficiently within the listed temperature range.

Each

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size	Net Weight	Type	Temp. Range, °F	Melting Temp.	Color	Specifications Met		Each
DuPont Molykote 111 Compound—Silica Thickener
2.5	Synthetic	Silicone	5.3 fl. oz.	__	Tube	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	0000000	000000
2.5	Synthetic	Silicone	14 fl. oz.	__	Grease Gun Cartridge	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	0000000	00000
2.5	Synthetic	Silicone	__	8 lbs.	Pail	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	0000000	000000

Package

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size	Net Weight	Type	Temp. Range, °F	Melting Temp.	Color	Specifications Met	Pkg. Qty.		Pkg.
DuPont Molykote 111 Compound—Silica Thickener
2.5	Synthetic	Silicone	__	0.2 oz.	One-Time-Use Pack	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	100	00000000	0000000
2.5	Synthetic	Silicone	5.3 fl. oz.	__	Tube	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	12	00000000	000000
2.5	Synthetic	Silicone	14 fl. oz.	__	Grease Gun Cartridge	-40° to 395°	Not Rated	White	FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61	10	00000000	000000

Bearing Grease

This grease is wear resistant for use in a wide range of bearing types.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Grease with lithium thickener offers good heat and moisture resistance.

Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with silicone can be used with most plastic and rubber parts under light loads.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

DuPont Molykote grease withstands high loads and has good wear resistance.

Each

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size, fl. oz.	Net Weight, lbs.	Type	Temp. Range, °F	Melting Temp., °F	Color		Each
DuPont Molykote 44 Medium High Temperature—Lithium Thickener
2	Synthetic	Moly, Silicone	__	8	Pail	-40° to 400°	430°	White	0000000	0000000
2	Synthetic	Moly, Silicone	5.3	__	Tube	-40° to 400°	430°	White	0000000	00000
2	Synthetic	Moly, Silicone	14	__	Grease Gun Cartridge	-40° to 400°	430°	White	0000000	000000

Package

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size, fl. oz.	Type	Temp. Range, °F	Melting Temp., °F	Color	Pkg. Qty.		Pkg.
DuPont Molykote 44 Medium High Temperature—Lithium Thickener
2	Synthetic	Moly, Silicone	5.3	Tube	-40° to 400°	430°	White	12	00000000	0000000
2	Synthetic	Moly, Silicone	14	Grease Gun Cartridge	-40° to 400°	430°	White	10	00000000	00000000

Food Industry Electrical-Insulating Grease

Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Grease that is NSF Registered H1 and grease that meets FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

Each

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size, fl. oz.	Type	Temp. Range, °F	Dielectric Strength, V/mil	Color	Specifications Met		Each
Silica Thickener
1	Synthetic	Silicone	1	Tube	-40° to 400°	350	Clear	NSF Registered H1	0000000	00000
1	Synthetic	Silicone	4	Tube	-40° to 400°	350	Clear	NSF Registered H1	0000000	00000
Nonmelting Grease without Thickener
2	Synthetic	Silicone	3	Tube	-40° to 500°	400	White	FDA Compliant 21 CFR 178.3570, NSF Registered H1	0000000	00000
2	Synthetic	Silicone	14.1	Grease Gun Cartridge	-40° to 500°	400	White	FDA Compliant 21 CFR 178.3570, NSF Registered H1	0000000	00000

Package

			Container
NLGI Viscosity Grade	Base Oil	Additive	Size, fl. oz.	Type	Temp. Range, °F	Dielectric Strength, V/mil	Color	Specifications Met	Pkg. Qty.		Pkg.
Silica Thickener
1	Synthetic	Silicone	4	Tube	-40° to 400°	350	Clear	NSF Registered H1	12	00000000	0000000
Nonmelting Grease without Thickener
2	Synthetic	Silicone	3	Tube	-40° to 500°	400	White	FDA Compliant 21 CFR 178.3570, NSF Registered H1	12	0000000	000000
2	Synthetic	Silicone	14.1	Grease Gun Cartridge	-40° to 500°	400	White	FDA Compliant 21 CFR 178.3570, NSF Registered H1	12	0000000	000000

Dry-Film Lubricants

These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.

Lubricants with silicone are clear, have excellent water resistance, and can be used on most rubber and plastic.

DuPont Molykote 557 Silicone Dry Film is often used on blades to keep them sharp longer.

Container				Each		Package
Net Weight	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
DuPont Molykote 557 Silicone Dry Film
13 1/2 oz.	Aerosol Can	Silicone	-40° to 110°	0000000	000000	12	00000000	0000000

Food Industry Dry-Film Lubricants

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

Lubricants with silicone can be used with plastic.

Each

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met		Each
Sprayon LU 211 Food Grade Dry Silicone
13 1/4	Aerosol Can	Silicone	-40° to 450°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	0000000	000000

Package

Container
Net Weight, oz.	Type	Additive	Temp. Range, °F	Specifications Met	Pkg. Qty.		Pkg.
Sprayon LU 211 Food Grade Dry Silicone
13 1/4	Aerosol Can	Silicone	-40° to 450°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	12	0000000	0000000

Conveyor Rail and Chute Dry-Film Lubricants

Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
11	Aerosol Can	Silicone	-15° to 400°	0000000	000000	12	0000000	0000000

Overhead Door Dry-Film Lubricants

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
9.3	Aerosol Can	PTFE, Silicone, Zinc	0° to 120°	0000000	00000	12	0000000	000000

No-Residue Mold-Release Lubricants

Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. Lubricants with silicone have a small amount of silicone for lubricity, but still allow you to paint molded parts without cleaning first.

Container				Each		Package
Net Weight, oz.	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
Sprayon MR 309 Paintable Release Agent
12	Aerosol Can	Silicone	-40° to 550°	0000000	000000	12	00000000	0000000

Heavy Duty No-Residue Mold-Release Lubricants

Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.

Container					Each		Package
Net Weight, oz.	Type	Additive	Max. Temp., °F	Compatible With		Each	Pkg. Qty.		Pkg.
Sprayon MR 307 Heavy Duty Paintable Release Agent
12	Aerosol Can	Silicone	550°	Plastic	0000000	000000	12	0000000	0000000

Mold-Release Lubricants

Apply these lubricants to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. They leave a residue, so they shouldn’t be used on parts that need to be painted.

Lubricants with silicone can be used with rubber and plastic. Sprayon MR 315 Urethane & Styrene Silicone Release Agent can be used with sensitive plastic, such as styrene and urethane.

Container					Each		Package
Size	Net Weight	Type	Additive	Temp. Range, °F		Each	Pkg. Qty.		Pkg.
Sprayon MR 315 Urethane & Styrene Silicone Release Agent
__	12 oz.	Aerosol Can	Silicone	-40° to 550°	0000000	000000	12	00000000	0000000
Lubricants
16 fl. oz.	__	Spray Bottle	Silicone	35° to 500°	0000000	00000	12	00000000	000000
1 gal.	__	Jug	Silicone	35° to 500°	0000000	00000	4	00000000	000000