This grease is wear resistant for use in a wide range of bearing types.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.

Grease with lithium thickener offers good heat and moisture resistance. Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease with clay thickener has excellent heat resistance and good oxidation resistance. Grease with carbon black thickener has excellent heat resistance and good moisture and oxidation resistance. Grease with boron nitride thickener has excellent heat resistance and good moisture and oxidation resistance.

Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with silicone can be used with most plastic and rubber parts under light loads.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

DuPont Molykote grease withstands high loads and has good wear resistance.

Chemours Krytox™ grease is long lasting with an indefinite shelf life. Krytox™ GPL grease is chemically inert and can be used with oxygen. Krytox™ XHT grease can be used at extremely high temperatures.

Loctite® Krytox™ RFE PFPE grease handles extreme temperature swings, resists aggressive chemicals and oxygen, and is long lasting. LB 8209 resists moisture. LB 8213 can be used under high loads.

Mobil Mobilith SHC 100 meets the requirements of most electric motor manufacturers for grease-lubricated bearings. Mobil Mobiltemp SHC 32 offers good wear resistance for long service life.