Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Lubricants with graphite have good heat and excellent wear resistance. Lubricants with PTFE can be used with most plastics and are chemically inert.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly (molybdenum disulfide) for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.

DuPont Molykote 3402-C Anti-Friction cures when exposed to air. It has excellent corrosion resistance. DuPont Molykote 106 Anti-Friction cures when exposed to heat. Use it for your highest-pressure applications, such as pumps, pistons, bearings, and gears.

Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.