Mount Type Mount Type |
|---|
 |  |
| Screw | Threaded Stud |
 |  |
| Weld On | Threaded Hole |
Projection Projection |
|---|
Mounting Plate Width Mounting Plate Width |
|---|
Pull Capacity Pull Capacity |
|---|
|
|
|
Grip Style Grip Style |
|---|
 |  |
| Round | Oval |
 | |
| Rectangular |
Mounting Plate Height Mounting Plate Height |
|---|
|
|
|
Handle Width Handle Width |
|---|
Finish Finish |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Grip Material Grip Material |
|---|
|
Unthreaded Through-Hole Folding Pull Handles with Mounting Plate
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Their grip folds out of the way when it's not in use.
Round grips allow your hand to pivot in any direction.
Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round grips.
Nickel-plated, zinc-plated, and black-oxide steel handles resist rust.
Aluminum handle has mild corrosion resistance, is lightweight, and is nonmagnetic.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | Mounting Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Ht. | Thick. | Handle Wd. | Projection | Pull Cap., lbs. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1—Round Grip | |||||||||||||||
Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 3/8" | 2" | 325 | 1 3/4" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 00000 |
Nickel-Plated Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 3/8" | 2" | 325 | 1 3/4" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 0000 |
| 90° | 5/16" | __ | __ | 3 7/8" | 3" | Not Rated | 2 7/8" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 0000 |
Zinc-Plated Steel—Polished | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 1/2" | 2 1/8" | Not Rated | 1 3/4" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 0000000 | 0000 |
Black-Oxide Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 1/2" | 2 1/8" | Not Rated | 1 3/4" | 3 3/8" | 1/16" | 4 | No | No. 10, No. 8 | __ | 0000000 | 0000 |
304 Stainless Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 3/8" | 2" | 325 | 1 3/4" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 00000 |
Style 2—Round Grip | |||||||||||||||
Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 3/8" | 2 1/2" | 325 | 2 7/8" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 0000 |
Nickel-Plated Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 3/8" | 2 1/2" | 325 | 2 7/8" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 00000000 | 0000 |
Zinc-Plated Steel—Polished | |||||||||||||||
| 90° | 1/4" | __ | __ | 3 5/16" | 1 7/8" | 200 | 2 3/4" | 2 3/4" | 1/16" | 3 | Yes | No. 6 | __ | 0000000 | 0000 |
| 90° | 3/8" | __ | __ | 4 1/8" | 2 11/16" | 180 | 2 7/8" | 4" | 1/16" | 4 | Yes | No. 10 | __ | 0000000 | 0000 |
| 90° | 3/8" | __ | __ | 4 1/4" | 2 1/8" | 200 | 3 1/2" | 3 1/2" | 1/16" | 4 | Yes | No. 10 | __ | 0000000 | 0000 |
| 90° | 7/16" | __ | __ | 4 1/2" | 3 1/8" | 175 | 4 1/4" | 4 13/16" | 1/16" | 5 | Yes | No. 12 | __ | 0000000 | 00000 |
Black-Oxide Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 3 1/2" | 2 1/4" | Not Rated | 2 7/8" | 3 3/8" | 1/16" | 4 | No | No. 10 | __ | 0000000 | 0000 |
Style 3—Rectangular Grip | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 90° | __ | 1/4" | 1/4" | 4" | 1 3/4" | Not Rated | 1 3/4" | 4 1/2" | 1/16" | 4 | No | No. 8 | __ | 00000000 | 0000 |
Style 4—Rectangular Grip | |||||||||||||||
Black Anodized Aluminum—Dull | |||||||||||||||
| 180° | __ | 11/16" | 5/16" | 4 5/8" | 2 5/8" | Not Rated | 1 1/4" | 4 1/8" | 1/16" | 6 | No | No. 6 | __ | 00000000 | 00000 |
Style 5—Round Grip | |||||||||||||||
304 Stainless Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | __ | 4 1/2" | 3 3/16" | Not Rated | 2 3/4" | 4 3/4" | 1/16" | 5 | No | No. 10 | -40° to 240° | 0000000 | 00000 |
300 Series Stainless Steel with Rubber Grip—Dull | |||||||||||||||
| 90° | 9/16" | __ | __ | 4 1/2" | 2 7/16" | Not Rated | 2 3/4" | 4 3/4" | 1/16" | 5 | No | No. 10 | -40° to 240° | 0000000 | 00000 |
Spring-Loaded Unthreaded Through-Hole Folding Pull Handles with Mounting Plate
When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All have round grips that allow your hand to pivot in any direction.
Style 4 handles fit into a cutout, so they're flush with the mounting surface.
Steel handles are painted or plated for rust resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | Mounting Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Material | Handle Wd. | Projection | Back Projection | Pull Cap., lbs. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1—Round Grip | |||||||||||||||
Black Painted Steel—Dull | |||||||||||||||
| 90° | 9/16" | Rubber | 4 1/2" | 2 13/16" | __ | Not Rated | 1 1/16" | 4 3/16" | 1/16" | 3 | No | No. 10 | -40° to 150° | 0000000 | 00000 |
Zinc-Plated Steel—Polished | |||||||||||||||
| 90° | 3/4" | Rubber | 4 1/2" | 3 1/8" | __ | Not Rated | 1 3/16" | 5 1/8" | 1/16" | 3 | No | No. 10 | -40° to 150° | 0000000 | 0000 |
300 Series Stainless Steel—Dull | |||||||||||||||
| 90° | 9/16" | Rubber | 4 1/2" | 2 13/16" | __ | Not Rated | 1 1/16" | 4 3/16" | 1/16" | 3 | No | No. 10 | -40° to 150° | 0000000 | 00000 |
Style 2—Round Grip | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
| 90° | 3/4" | Rubber | 4 7/8" | 3 5/8" | __ | Not Rated | 1 5/8" | 5 5/8" | 1/16" | 5 | No | No. 8 | -40° to 240° | 0000000 | 00000 |
Style 3—Round Grip | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
| 90° | 9/16" | Rubber | 4 1/2" | 3 1/16" | __ | Not Rated | 2 3/4" | 4 3/4" | 1/16" | 5 | No | No. 10 | -40° to 240° | 0000000 | 00000 |
| 90° | 13/16" | Plastic | 4 3/4" | 3 3/8" | __ | 495 | 2 3/8" | 4 9/16" | 1/16" | 5 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
| 90° | 13/16" | Plastic | 7 5/8" | 4 15/16" | __ | 220 | 2 3/8" | 7 1/2" | 1/16" | 5 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||||
| 90° | 13/16" | Plastic | 4 3/4" | 3 3/8" | __ | 495 | 2 3/8" | 4 9/16" | 1/16" | 5 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
300 Series Stainless Steel—Dull | |||||||||||||||
| 90° | 5/16" | __ | 4 1/2" | 2 5/8" | __ | Not Rated | 2 3/4" | 4 3/4" | 1/16" | 5 | No | No. 10 | -40° to 240° | 0000000 | 00000 |
| 90° | 9/16" | Rubber | 4 1/2" | 3 3/8" | __ | Not Rated | 2 3/4" | 4 3/4" | 1/16" | 5 | No | No. 10 | -40° to 240° | 0000000 | 00000 |
Style 4—Round Grip | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
| 90° | 5/8" | Plastic | 3 3/4" | 2 3/4" | 3/8" | 85 | 4 1/2" | 6" | 1/16" | 8 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
| 90° | 13/16" | Plastic | 4 3/4" | 3 3/8" | 9/16" | 330 | 5" | 7 1/8" | 1/16" | 12 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||||
| 90° | 5/8" | Plastic | 3 3/4" | 2 11/16" | 3/8" | 165 | 4 1/2" | 6" | 1/16" | 8 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
Curved Unthreaded Through-Hole Folding Pull Handles with Mounting Plate
Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. Fasten them directly to the front of the surface. All have round grips that allow your hand to pivot in any direction.
Steel handles have a zinc-plated finish for corrosion resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Grip | Mounting Plate | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | For Drum Dia. | Dia. | Material | Handle Wd. | Projection | Ht. | Wd. | Thick. | Mount. Fasteners Included | Temp. Range, °F | Each | |
Round Grip | ||||||||||||
Zinc-Plated Steel—Dull | ||||||||||||
| 90° | 23 1/2" | 13/16" | Nylon Plastic | 5 1/2" | 5/8" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 000000 |
| 90° | 23 1/2" | 13/16" | Nylon Plastic | 5 1/2" | 11/16" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
| 90° | 23 1/2" | 13/16" | Nylon Plastic | 5 1/2" | 3/4" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||
| 90° | 23 1/2" | 9/16" | Nylon Plastic | 4 7/16" | 5/8" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
| 90° | 23 1/2" | 9/16" | Nylon Plastic | 4 7/16" | 11/16" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
| 90° | 23 1/2" | 9/16" | Nylon Plastic | 4 7/16" | 3/4" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
Weld-On Folding Pull Handles with Mounting Plate
These handles provide a stronger connection than those attached with screws or nuts. Their round grip alows your hand to pivot in any direction and folds out of the way when it's not in use. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | Mounting Plate | |||||||
|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Handle Wd. | Projection | Ht. | Wd. | Thick. | Each | |
Style 1—Round Grip | ||||||||
1008 Carbon Steel—Dull | ||||||||
| 90° | 5/16" | 3 7/8" | 3" | 2 7/8" | 3 3/8" | 1/16" | 00000000 | 00000 |
| 90° | 5/16" | 4" | 2 1/2" | 1 3/4" | 3 3/8" | 1/16" | 00000000 | 0000 |
| 90° | 5/16" | 4" | 2 1/2" | 2 7/8" | 3 3/8" | 1/32" | 00000000 | 0000 |
| 90° | 3/8" | 5 1/8" | 3 1/4" | 2 5/8" | 4" | 1/16" | 00000000 | 00000 |
304 Stainless Steel—Dull | ||||||||
| 90° | 5/16" | 3 1/2" | 2 1/4" | 1 3/4" | 3 3/8" | 1/16" | 0000000 | 00000 |
Style 2—Round Grip | ||||||||
304 Stainless Steel—Dull | ||||||||
| 120° | 1/4" | 2 15/16" | 1 13/16" | 1 3/8" | 3 1/2" | 1/16" | 0000000 | 0000 |
Curved Weld-On Folding Pull Handles with Mounting Plate
Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. They provide a stronger connection than those attached with screws or nuts. All have round grips that allow your hand to pivot in any direction.
Grip | Mounting Plate | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | For Drum Dia. | Material | Dia. | Handle Wd. | Projection | Ht. | Wd. | Thick. | Mount. Fasteners Included | Temp. Range, °F | Each | |
Round Grip | ||||||||||||
Steel—Dull | ||||||||||||
| 90° | 23 1/2" | Nylon Plastic | 13/16" | 5 1/2" | 5/8" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 000000 |
| 90° | 23 1/2" | Nylon Plastic | 13/16" | 5 1/2" | 11/16" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
| 90° | 23 1/2" | Nylon Plastic | 13/16" | 5 1/2" | 3/4" | 2 1/8" | 4" | 1/16" | No | 20° to 390° | 0000000 | 00000 |
Unthreaded Through-Hole Recessed Folding Pull Handles with Mounting Plate
Fasten these handles directly to the front of your surface. They fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.
Round grips allow your hand to pivot in any direction.
Oval grips conform to your hand and offer more control than round grips.
Rectangular grip has a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Style 5 and 6 handles have a spring-loaded hinge that keeps the grip flush with the mounting plate and prevents rattling when it's not in use.
Steel handles are plated or coated for rust resistance.
Brass and chrome-plated brass handles have good corrosion resistance and are nonmagnetic.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | For Panel Cutout | Mounting Plate | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Ht. | Thick. | Handle Wd. | Projection | Back Projection | Dia. | Ht. | Wd. | Dia. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||||
| 110° | 1/4" | __ | __ | 1 7/8" | 1 3/16" | 3/8" | __ | 2 1/4" | 2 3/8" | __ | 5" | 3 1/2" | 3/32" | 3 | No | 1/4" | __ | 0000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||||||||||
| 110° | 1/4" | __ | __ | 1 7/8" | 1 3/16" | 3/8" | __ | 2 1/4" | 2 3/8" | __ | 5" | 3 1/2" | 3/32" | 3 | No | 1/4" | __ | 0000000 | 00000 |
Style 2—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Polished | |||||||||||||||||||
| 110° | 5/16" | __ | __ | 1 1/2" | 2" | 7/16" | __ | 2 3/4" | 2 1/4" | __ | 3 1/2" | 3" | 1/16" | 4 | Yes | No. 7 | __ | 0000000 | 00000 |
Style 3—Oval Grip | |||||||||||||||||||
304 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 3/16" | 11/16" | 1" | 7/16" | __ | 1 3/8" | 1 1/16" | __ | 1 3/4" | 1 1/2" | 1/32" | 4 | No | No. 6 | __ | 00000000 | 0000 |
| 90° | __ | 1/4" | 1/4" | 1 1/16" | 1 1/2" | 7/16" | __ | 1 13/16" | 1 1/2" | __ | 2 9/16" | 2 3/16" | 1/32" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 4—Oval Grip | |||||||||||||||||||
Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | __ | 2 3/16" | 1 11/16" | __ | 2 1/2" | 2" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/8" | 3/8" | __ | 1 3/8" | 1 5/16" | __ | 1 3/4" | 1 1/2" | 1/8" | 4 | No | No. 6 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | __ | 2 3/16" | 1 11/16" | __ | 2 1/2" | 2" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
316 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/8" | __ | 1 7/8" | 1 9/16" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 5—Rectangular Grip, Spring-Loaded Hinge | |||||||||||||||||||
304 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/4" | 1/4" | 1 11/16" | 1 5/16" | 15/32" | __ | 1 3/4" | 2 5/16" | __ | 2 1/4" | 3" | 1/32" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 6—Round Grip, Spring-Loaded Hinge | |||||||||||||||||||
Zinc-Plated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 7/16" | __ | __ | 4 5/16" | 2 5/8" | 3/8" | __ | 3 1/8" | 5 1/4" | __ | 4" | 6 1/8" | 1/16" | 8 | No | No. 10 | -40° to 240° | 00000000 | 0000 |
| 90° | 3/4" | __ | __ | 4 3/4" | 3" | 5/8" | __ | 3 3/4" | 5 3/4" | __ | 5" | 7" | 1/16" | 14 | No | No. 10 | -40° to 240° | 00000000 | 00000 |
Black Epoxy-Coated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 3/4" | __ | __ | 4 3/4" | 3" | 5/8" | __ | 3 3/4" | 5 3/4" | __ | 5" | 7" | 1/16" | 14 | No | No. 10 | -40° to 240° | 00000000 | 00000 |
Style 7—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||||
| 150° | 1/4" | __ | __ | 1 1/4" | 1 7/8" | 1/4" | 3" | __ | __ | 3 1/2" | __ | __ | 1/16" | 2 | No | 1/4" | __ | 0000000 | 0000 |
Style 8—Rectangular Grip | |||||||||||||||||||
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 5/16" | 5/16" | 1 11/16" | 1 3/16" | 5/16" | __ | 1 3/4" | 2 7/16" | __ | 2 3/16" | 2 15/16" | 1/16" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 9—Oval Grip | |||||||||||||||||||
316 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/4" | 1/4" | 2 3/8" | 1 1/4" | 1/4" | __ | 1 3/4" | 2 5/8" | __ | 2 1/8" | 3" | 1/16" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 10—Oval Grip | |||||||||||||||||||
Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/4" | 2" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | __ | 1 5/16" | 1 1/8" | 1 5/8" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 0000 |
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/4" | 2" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | __ | 1 5/16" | 1 1/8" | 1 5/8" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 0000 |
Threaded-Hole Recessed Folding Pull Handles with Mounting Plate
Thread screws through holes from the back of your surface into the handle to install. This handle fits into a cutout, so it's flush with the mounting surface. Its grip drops out of the way when you let go. When not in use, the spring-loaded hinge keeps the grip flush with the mounting plate and prevents rattling. Use this handle to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Its rectangular grip has a flat surface that keeps your hand from slipping.
Chrome-plated zinc handles have good corrosion resistance.
316 stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | For Panel Cutout | Mounting Plate | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Ht. | Thick. | Material | Handle Wd. | Projection | Back Projection | Ht. | Wd. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Temp. Range, °F | Features | Each | |
Rectangular Grip | |||||||||||||||||
Chrome-Plated Zinc—Polished | |||||||||||||||||
| 90° | 11/16" | 9/16" | Rubber | 3 3/4" | 1 13/16" | 11/16" | 3" | 5 5/16" | 3 3/16" | 5 9/16" | 5/32" | 4 | Yes | -10° to 200° | Spring-Loaded Hinge | 00000000 | 0000000 |
316 Stainless Steel—Polished | |||||||||||||||||
| 90° | 1/2" | 5/8" | Stainless Steel | 4 3/16" | 3 3/8" | 15/16" | 3 1/4" | 5 3/4" | 3 13/16" | 5 15/16" | 5/16" | 4 | Yes | Not Rated | Spring-Loaded Hinge | 00000000 | 000000 |
Stay-Put Threaded-Stud Folding Pull Handles
Detents keep these handles in the extended or folded position—they won't move until you reposition them. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All of these handles have round grips that allow your hand to pivot in any direction.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Folding Angle | Mount. Stud Ctr.-to-Ctr. Wd. | Grip Dia. | Projection | Thread Size | Stud Lg. | Mount. Fasteners Included | Features | Each | |
Round Grip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
303 Stainless Steel—Dull | |||||||||
| 90° | 3" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 000000 |
| 90° | 4" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 90° | 5" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 90° | 6" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 180° | 3" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
| 180° | 4" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
| 180° | 5" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 0000000 | 00000 |
| 180° | 6" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 0000000 | 00000 |
Anodized Aluminum—Dull | |||||||||
| 90° | 3" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 90° | 4" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 90° | 5" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 90° | 6" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Two Detents | 0000000 | 00000 |
| 180° | 3" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
| 180° | 4" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
| 180° | 5" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
| 180° | 6" | 5/16" | 1 9/16" | 3/8"-24 | 5/8" | Yes | Three Detents | 000000 | 00000 |
Threaded-Stud Folding Pull Handles
These handles have a folding grip that drops out of the way when you let go. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All have round grips that allow your hand to pivot in any direction.
Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
| Folding Angle | Mount. Stud Ctr.-to-Ctr. Wd. | Grip Dia. | Projection | Thread Size | Stud Lg. | Mount. Fasteners Included | Each | |
Round Grip | ||||||||
|---|---|---|---|---|---|---|---|---|
Black Anodized Aluminum—Dull | ||||||||
| 90° | 3" | 1/4" | 1 7/16" | 5/16"-24 | 9/16" | Yes | 00000000 | 000000 |
| 90° | 4" | 5/16" | 1 7/8" | 5/16"-24 | 3/8" | Yes | 000000 | 00000 |
| 90° | 5" | 5/16" | 1 7/8" | 5/16"-24 | 3/8" | Yes | 000000 | 00000 |
| 90° | 6" | 5/16" | 1 7/8" | 5/16"-24 | 3/8" | Yes | 000000 | 00000 |
Stainless Steel—Dull | ||||||||
| 90° | 3" | 1/4" | 1 7/16" | 5/16"-24 | 9/16" | Yes | 00000000 | 00000 |
| 90° | 4" | 1/4" | 1 7/16" | 5/16"-24 | 9/16" | Yes | 00000000 | 00000 |
| 90° | 5" | 1/4" | 1 7/16" | 5/16"-24 | 9/16" | Yes | 00000000 | 00000 |
| 90° | 6" | 1/4" | 1 7/16" | 5/16"-24 | 9/16" | Yes | 00000000 | 00000 |
Unthreaded Through-Hole Folding Pull Handles
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. When not in use, the grip folds out of the way.
Round grips allow your hand to pivot in any direction.
Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Steel handles are plated or coated for rust resistance.
Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Mount. Hole Ctr.-to-Ctr. | Grip | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Wd. | Ht. | Dia. | Ht. | Thick. | Wd. | Projection | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1—Round Grip | |||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||
| 180° | 5 3/4" | 1" | 9/16" | __ | __ | 7 1/4" | 2" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Black Plastic-Coated Steel—Dull | |||||||||||||
| 180° | 5 3/4" | 1" | 9/16" | __ | __ | 7" | 1 15/16" | 4 | No | No. 8 | Not Rated | 00000000 | 0000 |
Style 2—Rectangular Grip | |||||||||||||
Black Plastic-Coated Steel—Dull | |||||||||||||
| 180° | 5 3/4" | __ | __ | 13/16" | 1 3/16" | __ | 2 7/8" | 4 | No | No. 6 | Not Rated | 00000000 | 00000 |
Black Plastic | |||||||||||||
| 180° | 5 3/4" | __ | __ | 9/16" | 15/16" | __ | 2 13/16" | 4 | No | No. 6 | 40° to 80° | 00000000 | 0000 |
Style 3—Rectangular Grip | |||||||||||||
Black Plastic | |||||||||||||
| 180° | 2 3/8" | __ | __ | 3/4" | 1/2" | 5 3/4" | 2 3/8" | 2 | No | No. 6 | 40° to 80° | 00000000 | 0000 |
Style 4—Rectangular Grip | |||||||||||||
Black Plastic | |||||||||||||
| 180° | 4 1/8" | 1" | __ | 5/8" | 15/16" | 6" | 2 3/8" | 4 | No | No. 6 | 40° to 80° | 00000000 | 0000 |
Threaded-Hole Folding Pull Handles
Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Detents keep these handles in the extended or folded position—they won't move until you reposition them. Made of aluminum, they have mild corrosion resistance, are lightweight, and are nonmagnetic. All have round grips that allow your hand to pivot in any direction.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Mount. Hole Ctr.-to-Ctr. Wd. | Grip Dia. | Projection | Size | Dp. | No. of Mount. Holes | Mount. Fasteners Included | Features | Each | |
Round Grip | ||||||||||
Black Powder-Coated Aluminum—Dull | ||||||||||
| 90° | 4" | 3/8" | 2" | 8-32 | 1/4" | 2 | Yes | Two Detents | 000000 | 000000 |
| 90° | 5" | 3/8" | 2" | 8-32 | 1/4" | 2 | Yes | Two Detents | 000000 | 00000 |
| 90° | 6" | 3/8" | 2" | 8-32 | 1/4" | 2 | Yes | Two Detents | 000000 | 00000 |