With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

Also known as balance tables, these marble tables provide superior vibration control for sensitive measuring equipment.

Welded for strength and stability, these tables support 3,000 to 5,500 lbs.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Keep sawdust and other particles out of the air while drilling, sanding, and finishing wood products. Air blowers pull particles into the table through holes in the surface, making sure you don't breathe them.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Start with the workbench and then customize the interior by adding drawers and shelves.

Often used in laboratories and food-processing plants, these workbenches resist corrosion.

These workbenches range in size from 25"-42" wide.

At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.

To keep work from falling off the top, these workbenches have a backstop and side stops.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.

Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.

Panels on three sides let you stack material high, while the top shelf can be used as a work surface.

Store, organize, and transport spools of wire and small tools around your jobsite.