Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Nickel-plated steel has some corrosion resistance.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Use these metric mounts on heavy machines and equipment.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

A hex nut at the base of the stud allows for easy height adjustment.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Meant for light duty applications, these mounts are not rated for capacity.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Higher deflection ratings translate to greater vibration and shock isolation.

Bolt these mounts down to keep your equipment stationary.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.

A two-piece design makes these mounts easier to install than one-piece mounts.

These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Rated for high load capacity, use these metric inserts to connect threaded leveling mounts to heavy equipment.

Insert these adjustable mounts into tube ends to level your equipment in a single step.

Place these feet under furniture and equipment.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

Use these feet on furniture with wood legs.

Press these feet into tubular legs of tables, chairs, and other furniture.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.

These locks bolt or weld to the side of equipment that can't accommodate a floor lock underneath. Compatible with a wide range of caster mount heights.