Slide drawers, panels, and doors with these tracks and rollers.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Pivots provide smooth motion at the junction between two T-slotted rails.

Illuminate workstations, enclosures, and machines.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Serrated grooves grip the lip of the channel.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Keep a rod securely centered against the strut channel.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Connect two channels to create a stacked channel.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Notches on these washers grip the channel to keep them in place.

Support the corners of strut channel structures.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Provide a stable, nonmarring base for strut channel legs.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

This welded, one-piece strut channel combines two strut channels side-to-side.

Provide smooth motion between two pieces of strut channel.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Create posts of varying lengths.

Keep your fingers and hands protected from your drill bit, drill chuck, and flying chips.

Block chips while maintaining an unobstructed view of the workpiece.

Mount near a machine to deflect debris away from the immediate area. Guards swing in and out as needed.

These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

Restrict access to an area of your facility.

Weighted bases allow you to install these railings without drilling holes.

Gates collapse for easy transport and storage.

Shield your robot arm from dirt and damage with these covers.

Light beams travel up to 32 ft. between the transmitter and receiver.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Create secure but visible tool and stock rooms.