Thread Size Thread Size |
|---|
For Slot Width For Slot Width |
|---|
Base Width Base Width |
|---|
Threading Threading |
|---|
|
Material Material |
|---|
|
Base Height Base Height |
|---|
Overall Height Overall Height |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
T-Slot Nut Base Width T-Slot Nut Base Width |
|---|
|
|
|
T-Slot Nut Base Height T-Slot Nut Base Height |
|---|
|
|
|
T-Slot Nuts
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
For technical drawings and 3-D models, click on a part number.
Inch
Base | Fully Threaded | Partially Threaded | ||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | For Slot Wd. | Ht. | Wd. | O'all Ht. | Each | Each | ||
Black-Oxide Steel | ||||||||
| 1/4"-20 | 5/16" | 3/16" | 9/16" | 1/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1/4"-20 | 3/8" | 15/64" | 9/16" | 3/8" | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 3/8" | 1/4" | 5/8" | 3/8" | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 7/16" | 7/32" | 11/16" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 9/32" | 7/8" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 7/16" | 7/32" | 11/16" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 1/2" | 9/32" | 7/8" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 9/16" | 11/32" | 7/8" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 5/8" | 3/8" | 1" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-14 | 1/2" | 9/32" | 7/8" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 9/16" | 11/32" | 7/8" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 11/32" | 1" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 3/8" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 11/16" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4" | 15/32" | 1 1/4" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 11/16" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 3/4" | 15/32" | 1 1/4" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 13/16" | 9/16" | 1 1/4" | 1" | 000000000 | 0000 | 000000000 | 0000 |
| 3/4"-10 | 13/16" | 9/16" | 1 1/4" | 1" | 000000000 | 0000 | 000000000 | 0000 |
| 3/4"-10 | 7/8" | 9/16" | 1 1/2" | 1" | 000000000 | 0000 | 000000000 | 0000 |
| 3/4"-10 | 1" | 5/8" | 1 5/8" | 1" | 000000000 | 0000 | 000000000 | 0000 |
| 3/4"-10 | 1" | 3/4" | 1 3/4" | 1 1/2" | 000000000 | 00000 | 000000000 | 00000 |
| 3/4"-10 | 1 1/16" | 11/16" | 1 5/8" | 1 1/8" | 000000000 | 0000 | 000000000 | 0000 |
| 7/8"-9 | 1" | 5/8" | 1 5/8" | 1" | 000000000 | 0000 | 000000000 | 0000 |
| 7/8"-9 | 1 1/16" | 11/16" | 1 5/8" | 1 1/8" | 000000000 | 00000 | 000000000 | 00000 |
| 7/8"-9 | 1 1/8" | 3/4" | 1 3/4" | 1 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 7/8"-9 | 1 5/16" | 15/16" | 2" | 1 1/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1"-8 | 1 1/16" | 11/16" | 1 5/8" | 1 1/8" | 000000000 | 00000 | 000000000 | 00000 |
| 1"-8 | 1 1/8" | 3/4" | 1 3/4" | 1 1/2" | 000000000 | 00000 | 000000000 | 00000 |
| 1"-8 | 1 1/4" | 7/8" | 2" | 1 1/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1"-8 | 1 5/16" | 15/16" | 2" | 1 1/4" | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4"-7 | 1 3/8" | 1 1/8" | 2 1/2" | 1 3/4" | 000000000 | 00000 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
| 1/4"-20 | 5/16" | 3/16" | 1/2" | 1/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 3/8" | 7/32" | 5/8" | 13/32" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 7/16" | 7/32" | 3/4" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 1/2" | 1/4" | 7/8" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 9/16" | 11/32" | 7/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 3/8" | 1" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 11/16" | 15/32" | 1 1/8" | 1 1/8" | 000000000 | 00000 | 000000000 | 00000 |
| 5/8"-11 | 11/16" | 15/32" | 1 1/4" | 1" | 000000000 | 00000 | 000000000 | 00000 |
| 5/8"-11 | 3/4" | 15/32" | 1 1/4" | 3/4" | 000000000 | 00000 | 000000 | 00 |
| 3/4"-10 | 13/16" | 9/16" | 1 1/4" | 1" | 000000000 | 00000 | 000000 | 00 |
| 3/4"-10 | 1" | 5/8" | 1 5/8" | 1" | 000000000 | 00000 | 000000 | 00 |
| 3/4"-10 | 1 1/16" | 11/16" | 1 5/8" | 1 1/8" | 000000000 | 00000 | 000000 | 00 |
Metric
Base | Fully Threaded | Partially Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Specifications Met | Each | Each | ||
Black-Oxide Steel | ||||||||||
| M4 | 0.7 | 5 | 3 | 9 | 6.5 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M5 | 0.8 | 6 | 4 | 10 | 8 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M6 | 1 | 8 | 6 | 14 | 10 | __ | 000000000 | 0000 | 000000000 | 00000 |
| M6 | 1 | 10 | 6 | 16 | 11 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | 14 | 8 | 22 | 16 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M8 | 1.25 | 10 | 6 | 16 | 11 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | 12 | 7 | 18 | 14 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M8 | 1.25 | 14 | 8 | 22 | 16 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M8 | 1.25 | 16 | 9 | 25 | 18 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M8 | 1.25 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M10 | 1.5 | 12 | 7 | 19 | 13 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | 14 | 9 | 22 | 16 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | 16 | 9 | 25 | 18 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M10 | 1.5 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M12 | 1.75 | 14 | 9 | 22 | 16 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | 16 | 9 | 25 | 16 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | 17 | 11 | 29 | 19 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M12 | 1.75 | 20 | 12 | 32 | 24 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M14 | 2 | 16 | 9 | 25 | 18 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M14 | 2 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M16 | 2 | 18 | 11 | 29 | 19 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M16 | 2 | 20 | 14 | 32 | 25 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M16 | 2 | 22 | 14 | 35 | 28 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M16 | 2 | 24 | 16 | 40 | 32 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M16 | 2 | 28 | 18 | 44 | 36 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M18 | 2.5 | 20 | 12 | 32 | 24 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M18 | 2.5 | 22 | 14 | 35 | 28 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M20 | 2.5 | 22 | 14 | 35 | 25 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M20 | 2.5 | 24 | 16 | 40 | 32 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M20 | 2.5 | 28 | 18 | 44 | 36 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M22 | 2.5 | 24 | 16 | 40 | 32 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M24 | 3 | 27 | 18 | 41 | 29 | __ | 000000000 | 0000 | 000000000 | 0000 |
| M24 | 3 | 28 | 18 | 44 | 36 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M24 | 3 | 33 | 24 | 51 | 32 | __ | 000000000 | 00000 | 000000000 | 00000 |
| M27 | 3 | 32 | 20 | 50 | 40 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M30 | 3.5 | 36 | 22 | 54 | 44 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M36 | 4 | 42 | 26 | 65 | 52 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M42 | 4.5 | 48 | 30 | 75 | 60 | DIN 508 | 000000000 | 000000 | 000000 | 00 |
| M48 | 5 | 54 | 34 | 85 | 70 | DIN 508 | 000000000 | 000000 | 000000 | 00 |
18-8 Stainless Steel | ||||||||||
| M6 | 1 | 8 | 6 | 13 | 10 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M8 | 1.25 | 10 | 6 | 15 | 12 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M10 | 1.5 | 12 | 7 | 18 | 14 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M12 | 1.75 | 14 | 8 | 22 | 16 | DIN 508 | 000000000 | 0000 | 000000 | 00 |
| M14 | 2 | 16 | 9 | 25 | 18 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
| M16 | 2 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 00000 | 000000 | 00 |
Drop-In T-Slot Nuts
Install these nuts from the top of the T-slot track and secure with a quarter turn to anchor clamps and workpieces. Also known as quarter-turn T-slot nuts.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
For technical drawings and 3-D models, click on a part number.
Inch
Base | Fully Threaded | Partially Threaded | ||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | For Slot Wd. | Ht. | Wd. | O'all Ht. | Each | Each | ||
Black-Oxide Steel | ||||||||
| 1/4"-20 | 5/16" | 15/64" | 33/64" | 25/64" | 000000000 | 00000 | 000000 | 00 |
| 5/16"-18 | 3/8" | 15/64" | 19/32" | 15/32" | 000000000 | 00000 | 000000 | 00 |
| 3/8"-16 | 7/16" | 13/64" | 7/16" | 1/2" | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/2" | 17/64" | 1/2" | 1/2" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 9/16" | 21/64" | 9/16" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 21/64" | 5/8" | 5/8" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 11/16" | 27/64" | 11/16" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 3/4" | 29/64" | 3/4" | 3/4" | 000000000 | 0000 | 000000000 | 0000 |
| 3/4"-10 | 1" | 39/64" | 1" | 1" | 000000000 | 0000 | 000000000 | 0000 |
Secure-Hold T-Slot Nuts
After sliding the nut into a T-slot track, tighten the set screw to keep it in place. Use these nuts to secure clamps and workpieces in a machine table. They’re fully threaded to allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
Inch
Base | Drive | Fully Threaded | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | For Slot Wd. | Ht. | Wd. | O'all Ht. | Size | Style | Includes | Each | |
Black-Oxide Steel | |||||||||
| 1/4"-20 | 3/8" | 5/32" | 1/2" | 3/8" | 1/8" | Hex | Set Screw | 00000000 | 000000 |
| 5/16"-18 | 7/16" | 0.22" | 5/8" | 5/8" | 5/32" | Hex | Set Screw | 00000000 | 00000 |
| 3/8"-16 | 1/2" | 15/64" | 3/4" | 5/8" | 3/16" | Hex | Set Screw | 00000000 | 00000 |
| 3/8"-16 | 9/16" | 19/64" | 7/8" | 3/4" | 3/16" | Hex | Set Screw | 00000000 | 00000 |
| 1/2"-13 | 5/8" | 27/64" | 1" | 7/8" | 7/32" | Hex | Set Screw | 00000000 | 00000 |
| 1/2"-13 | 11/16" | 0.35" | 1" | 1" | 7/32" | Hex | Set Screw | 00000000 | 00000 |
Metric
Thread | Base | Drive | Fully Threaded | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Size, mm | Style | Includes | Each | |
Black-Oxide Steel | ||||||||||
| M6 | 1 | 8 | 4.6 | 12.7 | 9.5 | 3 | Hex | Set Screw | 000000000 | 000000 |
| M6 | 1 | 10 | 4.3 | 14.2 | 14.2 | 3 | Hex | Set Screw | 000000000 | 00000 |
| M8 | 1.25 | 12 | 6.4 | 15.9 | 15.9 | 4 | Hex | Set Screw | 000000000 | 00000 |
| M10 | 1.5 | 14 | 8.5 | 22.4 | 22.2 | 5 | Hex | Set Screw | 000000000 | 00000 |
| M12 | 1.75 | 16 | 9.2 | 25.4 | 22.2 | 5 | Hex | Set Screw | 000000000 | 00000 |
| M12 | 1.75 | 18 | 10.5 | 28.6 | 28.6 | 6 | Hex | Set Screw | 00000000 | 00000 |
| M16 | 2 | 20 | 12.6 | 31.8 | 31.8 | 6 | Hex | Set Screw | 000000000 | 00000 |
| M16 | 2 | 22 | 12.5 | 34.9 | 41.3 | 6 | Hex | Set Screw | 000000000 | 00000 |
T-Slot Nut and Setup Stud Kits
For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.
Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.
T-Slot Nut | Setup Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Slot Wd. | No. of Pieces | Includes | Threading | Base Ht. | Base Wd. | Overall Ht. | Threading | Min.Tensile Strength, psi | Material | Each | |
5/16"-18 Thread Size | |||||||||||
| 3/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 1/4" | 5/8" | 3/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
3/8"-16 Thread Size | |||||||||||
| 7/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/32" | 11/16" | 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 1/2" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/32" | 7/8" | 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 9/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 7/8" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
1/2"-13 Thread Size | |||||||||||
| 9/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 7/8" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 5/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 1" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 11/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/16" | 1 1/8" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
5/8"-11 Thread Size | |||||||||||
| 11/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/16" | 1 1/8" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 3/4" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 15/32" | 1 1/4" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 13/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/4" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
3/4"-10 Thread Size | |||||||||||
| 13/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/4" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 7/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/2" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 5/8" | 1 5/8" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
7/8"-9 Thread Size | |||||||||||
| 1" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 5/8" | 1 5/8" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 3/4" | 1 3/4" | 1 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
1"-8 Thread Size | |||||||||||
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M8 Thread Size × 1.25mm Thread Pitch | |||||||||||
| 10mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 6mm | 16mm | 11mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M10 Thread Size × 1.5mm Thread Pitch | |||||||||||
| 12mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7mm | 19mm | 13mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 14mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 22mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M12 Thread Size × 1.75mm Thread Pitch | |||||||||||
| 14mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 22mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 16mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 25mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 17mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11mm | 29mm | 19mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M16 Thread Size × 2mm Thread Pitch | |||||||||||
| 18mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11mm | 29mm | 19mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 20mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 14mm | 32mm | 25mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M20 Thread Size × 2.5mm Thread Pitch | |||||||||||
| 22mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 14mm | 35mm | 25mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |