Formulated for use on soft metal, such as aluminum, copper, and brass, these sulfur-free lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free for use where chlorine waste disposal is a concern. They cannot be sold to California due to local regulatory limits on on VOCs (volatile organic compounds). Use at full strength.

These lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. They are chlorine free for use where chlorine waste disposal is a concern.

Lubricants with sulfur resist high pressure and are for use with difficult-to-machine material, such as stainless steel and hard metal.

Lubricants for use with cast iron, stainless steel, and steel will stain other metal. Use them at full strength or blended with other oil.

Apply Cool Tool II directly to your cutting tool. Use at full strength.

Use LPS Tapmatic lubricants at full strength. Tapmatic Natural is based on natural oil. It’s designed for use on steel and aluminum, but can be used on all metal. It is sulfur free.

Mobil Mobilmet 426 is designed for slow- to moderate-speed cutting when used with hard metal. Use at full strength. It is sulfur free.

Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

A high sulfur concentration provides the lubricity required to protect tools and stainless steel work surfaces, but these lubricants will stain other metal. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Use alone or blend with other oil.

For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.

These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.

Dissipate heat and prevent corrosion with these coolants that stand up to long machining cycles when milling and turning. They are chlorine free for use where chlorine waste disposal is a concern.

Dilute oil-based coolants with water for use in flood coolant systems. Mineral-oil-based coolants create a milky emulsion with excellent lubricity for use with difficult-to-machine material, such as stainless steel and hard metal. Lubricants with antimist additives resist misting for a cleaner workspace. They are sulfur free. Synthetic-oil-based coolants dissipate heat rapidly in high-speed applications and are long lasting. They create a clear emulsion that won’t foam, so you can see your workpiece clearly. They resist misting for a cleaner workspace. Lubricants are sulfur free. Semisynthetic-oil-based coolants are a mix of mineral and synthetic oil for economical, long-lasting performance. They are sulfur free and are formulated for use with soft metal, such as aluminum and copper.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.

Coolant in a stick is solid. Touch it to cutting tools or work surfaces. Coolant in a jar is a paste. It can also be used as a bending and forming paste.

Micro-drop coolant dispensers (sold separately) reduce heat with small, controlled droplets of coolant and air that dissipate heat and resist misting. Because only a small amount of coolant is used, they’re easy to clean up. Use for small jobs. They prevent corrosion and inhibit bacteria growth to prevent foul odors. They are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.

Synthetic-oil-based coolants are made with sulfur to handle demanding cuts with hard material. Vegetable-oil-based coolants are slipperier than synthetic-oil-based coolants, but they break down more quickly. They are sulfur free.

Mix these coolants with water to remove heat from long machining cycles with hard metal. They prevent workpiece corrosion and distortion to improve cutting accuracy. Use them with hacksaws, circular saws, and band saws. Made with synthetic oil, coolants are long lasting and resist misting for a cleaner workspace. They are chlorine free for use where chlorine waste disposal is a concern. They are sulfur free.

Use these coolants in drawing, stamping, and forming applications with all metal. They protect both dies and cutting edges as well as finished workpieces. Made of synthetic oil for wear and corrosion resistance. Coolants leave a residue that can be removed with water-based cleaners. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water.

For controlled cooling, use quenching oil instead of water to minimize cracking and distortion after heat treating parts and tools. It's nonstaining and chlorine and sulfur free. Use full strength.

Keep cylinder hones clean. This oil is nonstaining and chlorine free. Contains sulfur. Use full strength on all metals.