Diameter Diameter |
|---|
For Use On For Use On |
|---|
|
|
For Use With For Use With |
|---|
|
Material Material |
|---|
|
Shank Type Shank Type |
|---|
 | Round |
 | Morse Taper |
 | Threaded Hub |
For Tap Size For Tap Size |
|---|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
For Cutter Material For Cutter Material |
|---|
|
Inch Size Hollow-Core Cutters for Magnetic-Base Drills
Use these cutters with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
High-speed steel cutters have a bright finish and are for general purpose cutting.
Titanium nitride (TiN) coated high-speed steel cutters last longer than uncoated high-speed steel.
Cobalt steel cutters offer better heat and abrasion resistance than high-speed steel.
Carbide-tipped steel cutters last longer than high-speed steel and cobalt steel cutters and are for high-volume cutting of difficult-to-machine materials. Note: These cutters are more sensitive to shock and vibration compared to other cutters and should not be used with Jancy magnetic-base drill model USA101.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
(TiN)-Coated High-Speed
Steel, and Cobalt Steel
| Dia. | Each | |
High-Speed Steel | ||
|---|---|---|
1" Cutting Dp. | ||
| 7/16" | 000000000 | 000000 |
| 1/2" | 000000000 | 00000 |
| 9/16" | 000000000 | 00000 |
| 5/8" | 000000000 | 00000 |
| 11/16" | 000000000 | 00000 |
| 3/4" | 000000000 | 00000 |
| 13/16" | 000000000 | 00000 |
| 7/8" | 000000000 | 00000 |
| 15/16" | 000000000 | 00000 |
| 1" | 000000000 | 00000 |
| 1 1/16" | 000000000 | 00000 |
| 1 1/8" | 000000000 | 00000 |
| 1 3/16" | 000000000 | 00000 |
| 1 1/4" | 000000000 | 00000 |
| 1 5/16" | 000000000 | 00000 |
| 1 3/8" | 000000000 | 000000 |
| 1 1/2" | 000000000 | 000000 |
| 1 5/8" | 000000000 | 000000 |
| 1 3/4" | 000000000 | 000000 |
| 2" | 000000000 | 000000 |
2" Cutting Dp. | ||
| 7/16" | 000000000 | 00000 |
| 1/2" | 000000000 | 00000 |
| 9/16" | 000000000 | 00000 |
| 5/8" | 000000000 | 00000 |
| 11/16" | 000000000 | 00000 |
| 3/4" | 000000000 | 00000 |
| 13/16" | 000000000 | 00000 |
| 7/8" | 000000000 | 00000 |
| 15/16" | 000000000 | 00000 |
| 1" | 000000000 | 00000 |
| 1 1/16" | 000000000 | 00000 |
| 1 1/8" | 000000000 | 000000 |
| 1 3/16" | 000000000 | 000000 |
| 1 1/4" | 000000000 | 000000 |
| 1 5/16" | 000000000 | 000000 |
| 1 3/8" | 000000000 | 000000 |
| 1 1/2" | 000000000 | 000000 |
| 1 5/8" | 000000000 | 000000 |
| 1 3/4" | 000000000 | 000000 |
| 2" | 000000000 | 000000 |
Titanium Nitride (TiN)-Coated High-Speed Steel | ||
1" Cutting Dp. | ||
| 7/16" | 0000000 | 00000 |
| 1/2" | 0000000 | 00000 |
| 9/16" | 0000000 | 00000 |
| 5/8" | 0000000 | 00000 |
| 11/16" | 0000000 | 00000 |
| 3/4" | 0000000 | 00000 |
| 13/16" | 0000000 | 00000 |
| 7/8" | 0000000 | 00000 |
| 15/16" | 0000000 | 00000 |
| 1" | 0000000 | 00000 |
| 1 1/16" | 0000000 | 00000 |
| 1 1/8" | 0000000 | 00000 |
| 1 3/16" | 0000000 | 00000 |
| 1 1/4" | 0000000 | 00000 |
| 1 5/16" | 0000000 | 000000 |
| 1 3/8" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 000000 |
| 1 5/8" | 0000000 | 000000 |
| 1 3/4" | 0000000 | 000000 |
| 2" | 0000000 | 000000 |
2" Cutting Dp. | ||
| 7/16" | 0000000 | 00000 |
| 1/2" | 0000000 | 00000 |
| 9/16" | 0000000 | 00000 |
| 5/8" | 0000000 | 00000 |
| 11/16" | 0000000 | 00000 |
| 3/4" | 0000000 | 00000 |
| 13/16" | 0000000 | 00000 |
| 7/8" | 0000000 | 00000 |
| 15/16" | 0000000 | 00000 |
| 1" | 0000000 | 000000 |
| 1 1/16" | 0000000 | 000000 |
| 1 1/8" | 0000000 | 000000 |
| 1 3/16" | 0000000 | 000000 |
| 1 1/4" | 0000000 | 000000 |
| 1 5/16" | 0000000 | 000000 |
| 1 3/8" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 000000 |
| 1 5/8" | 0000000 | 000000 |
| 1 3/4" | 0000000 | 000000 |
| 2" | 0000000 | 000000 |
Cobalt Steel | ||
1" Cutting Dp. | ||
| 7/16" | 0000000 | 00000 |
| 1/2" | 0000000 | 00000 |
| 9/16" | 0000000 | 00000 |
| 5/8" | 0000000 | 00000 |
| 11/16" | 0000000 | 00000 |
| 3/4" | 0000000 | 00000 |
| 13/16" | 0000000 | 00000 |
| 7/8" | 0000000 | 00000 |
| 15/16" | 0000000 | 00000 |
| 1" | 0000000 | 00000 |
| 1 1/16" | 0000000 | 00000 |
| 1 1/8" | 0000000 | 00000 |
| 1 3/16" | 0000000 | 00000 |
| 1 1/4" | 0000000 | 00000 |
| 1 5/16" | 0000000 | 00000 |
| 1 3/8" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 000000 |
| 1 5/8" | 0000000 | 000000 |
| 1 3/4" | 0000000 | 000000 |
| 2" | 0000000 | 000000 |
2" Cutting Dp. | ||
| 7/16" | 0000000 | 00000 |
| 1/2" | 0000000 | 00000 |
| 9/16" | 0000000 | 00000 |
| 5/8" | 0000000 | 00000 |
| 11/16" | 0000000 | 00000 |
| 3/4" | 0000000 | 00000 |
| 13/16" | 0000000 | 00000 |
| 7/8" | 0000000 | 00000 |
| 15/16" | 0000000 | 00000 |
| 1" | 0000000 | 00000 |
| 1 1/16" | 0000000 | 000000 |
| 1 1/8" | 0000000 | 000000 |
| 1 3/16" | 0000000 | 000000 |
| 1 1/4" | 0000000 | 000000 |
| 1 5/16" | 0000000 | 000000 |
| 1 3/8" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 000000 |
| 1 5/8" | 0000000 | 000000 |
| 1 3/4" | 0000000 | 000000 |
| 2" | 0000000 | 000000 |
Carbide-Tipped Steel | ||
2" Cutting Dp. | ||
| 11/16" | 00000000 | 00000 |
| 3/4" | 00000000 | 00000 |
| 13/16" | 00000000 | 00000 |
| 7/8" | 00000000 | 00000 |
| 15/16" | 00000000 | 00000 |
| 1" | 00000000 | 00000 |
| 1 1/16" | 00000000 | 00000 |
| 1 1/8" | 00000000 | 000000 |
| 1 3/16" | 00000000 | 000000 |
| 1 1/4" | 00000000 | 000000 |
| 1 5/16" | 00000000 | 000000 |
| 1 3/8" | 00000000 | 000000 |
| 1 7/16" | 00000000 | 000000 |
| 1 1/2" | 00000000 | 000000 |
| 1 9/16" | 00000000 | 000000 |
| 1 5/8" | 00000000 | 000000 |
| 1 3/4" | 00000000 | 000000 |
| 1 13/16" | 00000000 | 000000 |
| 1 15/16" | 00000000 | 000000 |
| 2" | 00000000 | 000000 |
| Shank Type | Morse Taper Number | For Machine Spindle Type | For Machine Spindle Morse Taper No. | Shank Dia. | Overall Lg. | For Shank Size | Each | |
For High-Speed Steel and Cobalt Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Straight | __ | __ | __ | 3/4" | 5 1/8" | __ | 000000000 | 000000 |
| Morse Taper | 2 | __ | __ | __ | 6 1/4" | __ | 000000000 | 00000 |
| Morse Taper | 3 | __ | __ | __ | 6 1/4" | __ | 000000000 | 00000 |
For Carbide-Tipped Steel | ||||||||
| __ | __ | Morse Taper | 2 | __ | 160mm | 3/4" | 00000000 | 000000 |
| __ | __ | Morse Taper | 3 | __ | 190mm | 3/4" | 00000000 | 000000 |
Tap Size Hollow-Core Cutters for Magnetic-Base Drills
These cutters are perfectly sized for cutting holes that will be tapped later. Use them with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
High-Speed Steel | |||
|---|---|---|---|
| Dia. | For Tap Size | Each | |
2" Cutting Dp. | |||
| 27/64" | 1/2"-13 | 0000000 | 000000 |
| 29/64" | 1/2"-20 | 0000000 | 00000 |
| 31/64" | 9/16"-12 | 0000000 | 00000 |
| 17/32" | 5/8"-11 | 0000000 | 00000 |
| 21/32" | 3/4"-10 | 0000000 | 00000 |
| 49/64" | 7/8"-9 | 0000000 | 00000 |
| 51/64" | 7/8"-14 | 0000000 | 000000 |
| 59/64" | 1"-12 | 0000000 | 00000 |
| 59/64" | 1"-14 | 0000000 | 00000 |
| 1 1/32" | 1 1/8"-12 | 0000000 | 00000 |
| 1 7/64" | 1 1/4"-7 | 0000000 | 000000 |
| 1 11/64" | 1 1/4"-12 | 0000000 | 000000 |
| 1 11/32" | 1 1/2"-6 | 0000000 | 000000 |
| 1 27/64" | 1 1/2"-12 | 0000000 | 000000 |
| 25mm | 1 1/8"-7 | 0000000 | 00000 |
Hollow-Core Cutter Sets for Magnetic-Base Drills
Sets include five cutters, a pilot pin, and a hex key. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. For use with magnetic-base drills. You can also pair the cutters with an arbor adapter (sold separately) when using a manual drill press or milling machine. Also known as annular cutters.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
Metric Size Hollow-Core Cutters for Magnetic-Base Drills
Use these cutters with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
High-Speed Steel | ||
|---|---|---|
| Dia. | Each | |
1" Cutting Dp. | ||
| 12 mm | 0000000 | 000000 |
| 14 mm | 0000000 | 00000 |
| 16 mm | 0000000 | 00000 |
| 18 mm | 0000000 | 00000 |
| 20 mm | 0000000 | 00000 |
| 24 mm | 0000000 | 00000 |
| 26 mm | 0000000 | 00000 |
| 28 mm | 0000000 | 00000 |
| 30 mm | 0000000 | 00000 |
| 32 mm | 0000000 | 00000 |
2" Cutting Dp. | ||
| 12 mm | 0000000 | 00000 |
| 14 mm | 0000000 | 00000 |
| 16 mm | 0000000 | 00000 |
| 18 mm | 0000000 | 00000 |
| 20 mm | 0000000 | 00000 |
| 24 mm | 0000000 | 00000 |
| 26 mm | 0000000 | 00000 |
| 28 mm | 0000000 | 000000 |
| 30 mm | 0000000 | 000000 |
| 32 mm | 0000000 | 000000 |
Multiple-Sheet Inch Size Hollow-Core
Cutters for Magnetic-Base Drills
The geometry of these cutters allows you to cut aligned holes in multiple sheets at one time. Use them with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
High-Speed Steel | ||
|---|---|---|
| Dia. | Each | |
2" Cutting Dp. | ||
| 1/2" | 0000000 | 000000 |
| 9/16" | 0000000 | 00000 |
| 5/8" | 0000000 | 00000 |
| 11/16" | 0000000 | 00000 |
| 3/4" | 0000000 | 00000 |
| 13/16" | 0000000 | 000000 |
| 7/8" | 0000000 | 000000 |
| 15/16" | 0000000 | 000000 |
| 1" | 0000000 | 000000 |
| 1 1/8" | 0000000 | 000000 |
| 1 3/16" | 0000000 | 000000 |
| 1 1/4" | 0000000 | 000000 |
| 1 5/16" | 0000000 | 000000 |
| 1 3/8" | 0000000 | 000000 |
| 1 7/16" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 000000 |
Hollow-Core Cutters for Milwaukee
Magnetic-Base Drill Presses
Use these cutters with Milwaukee magnetic-base drill presses. They require an arbor adapter (sold separately). Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
Note: These cutters are not for use with Milwaukee magnetic-base drill presses that have a 1/2" max. drill bit size.
Carbide-Tipped Steel | |||
|---|---|---|---|
| Dia. | Manufacturer Model Number | Each | |
2" Cutting Dp. | |||
| 3/4" | 49-57-0750 | 00000000 | 000000 |
| 13/16" | 49-57-0812 | 00000000 | 00000 |
| 7/8" | 49-57-0875 | 00000000 | 000000 |
| 15/16" | 49-57-0937 | 00000000 | 000000 |
| 1" | 49-57-1000 | 00000000 | 000000 |
| 1 1/16" | 49-57-1062 | 00000000 | 000000 |
| 1 1/8" | 49-57-1125 | 00000000 | 000000 |
| 1 1/4" | 49-57-1250 | 00000000 | 000000 |
| 1 5/16" | 49-57-1312 | 00000000 | 000000 |
| 1 3/8" | 49-57-1375 | 00000000 | 000000 |
| 1 1/2" | 49-57-1500 | 00000000 | 000000 |
| 1 5/8" | 49-57-1625 | 00000000 | 000000 |
| 1 3/4" | 49-57-1750 | 00000000 | 000000 |
| 1 7/8" | 49-57-1875 | 00000000 | 000000 |
| 2" | 49-57-2000 | 00000000 | 000000 |
| 2 1/4" | 49-57-2250 | 00000000 | 000000 |
Arbor Adapters for Hollow-Core Cutters
with Morse
Taper Shank
with Straight
Shank
Use hollow-core cutters on manual drill presses and milling machines. Also known as annular cutter arbor adapters.
Morse Taper | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number | Dia. | Shank Dia. | For Cutter Shank Size | Overall Lg. | For Cutter Material | Material | Each | |
With Morse Taper Shank | ||||||||
| 2 | 0.7" | __ | 3/4" | 6 1/4" | Cobalt Steel, High-Speed Steel | High-Speed Steel | 000000000 | 000000 |
| 3 | 0.938" | __ | 3/4" | 6 1/4" | Cobalt Steel, High-Speed Steel | High-Speed Steel | 000000000 | 00000 |
With Straight Shank | ||||||||
| __ | __ | 3/4" | 3/4" | 5 1/8" | Cobalt Steel, High-Speed Steel | High-Speed Steel | 000000000 | 00000 |
Arbor Adapters for Milwaukee Hollow-Core Cutters
with Morse
Taper Shank
These arbor adapters are required when using Milwaukee hollow-core cutters, also known as annular cutters. They come with a pilot pin, which aligns the cutter and ejects the slug.
Morse Taper | For Bit Shank | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number | Dia. | Shank Dia. | Thread Size | Thread Pitch | Overall Lg. | For Cutter Material | Material | Manufacturer | Manufacturer Model Number | For Manufacturer Model Number | Includes | Each | |
With Morse Taper Shank | |||||||||||||
| 3 | 0.938" | __ | M18 | 1.5mm | 10" | Carbide-Tipped Steel | Steel | Milwaukee | 49-57-0010 | 4202, 4208-1, 4209-1, 4292-1, 4297-1 | Oil Hose, Oiler, Pilot Pin | 00000000 | 0000000 |
With Straight Shank | |||||||||||||
| __ | __ | 3/4" | M18 | 1.5mm | 10" | Carbide-Tipped Steel | Steel | Milwaukee | 49-57-0030 | 4206-1, 4210-1 | Oil Hose, Oiler, Pilot Pin | 00000000 | 000000 |