Slide steel plates and blocks off a stack.

A long handle gives you the leverage to safely remove manhole covers by yourself.

Lifters with magnet lift have a retractable handle that can be adjusted to lift at various angles. They fold up for easy storage and have two wheels for easy transportation. Requires a lifting magnet (sold separately).

Warning: Never use to lift people or items over people.

Also known as permanent lifting magnets, these magnets have an on/off handle to engage and release the magnet. They have a lifting eye for attaching a hook or sling. Style B magnet includes a detachable vertical lifting eye that mounts to the side of the magnet to lift plates vertically. Style C magnet has a pivoting lifting eye for both horizontal and vertical lifting.

Style A and B handles lock in both the on and off positions to prevent accidental release. Style C handle locks in the on position only.

Note: Capacities listed are based on lifting flat, rigid metal that has a clean, smooth surface. If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced. Do not use on metal that flexes.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Also known as permanent lifting magnets, these magnets hold a load until you pull the handle and pry the magnet off. They have a lifting eye for attaching a hook or sling.

Style B magnets have a nonmarring roller release that prevents scraping and gouging the load as it is released.

Note: Capacities listed are based on lifting flat metal that has a clean, smooth surface. If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Connect these magnets to an air system to lift odd-shaped and perforated metal parts that would cause a traditional vacuum cup to lose grip. A burst of air releases the magnet. The magnet stays engaged if the air system fails.

Destacking magnets lift and separate the top sheet from a stack.

Note: Capacities listed are based on lifting flat metal that has a clean, smooth surface. If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced

Warning: Never use to lift people or items over people.

Separate stacked steel sheets without prying, scratching, or bending them. These separators have a magnet which causes your stacked sheets to fan out. When you remove the top sheet, the next sheet automatically moves up. Separators have two nonmagnetic bars to keep plates moving freely.

Note: The number of separators required is approximate and you may need to add more separators.

An extra-long shaft enables access to material in hard-to-reach areas. These retrievers can pick up heavier objects than our other magnetic retrievers.

Pick up screws, nuts, and other small steel objects.

Adjustable-length retrievers have a telescoping shaft to extend your reach.

Often used to pick up steel sheets, the magnet holds material until you press the lever to disengage it.

LEDs light the magnetized tip for picking up screws, nuts, and other small steel objects in dark areas. These retrievers have a telescoping shaft to extend your reach.

A fluorescent orange handle makes these retrievers stand out, so they’re less likely to be misplaced. They have a telescoping shaft to extend your reach.

Bend the shaft to reach objects in awkward spaces.

Spring-back retrievers flex and then bounce back when pressure is released.

Bend-and-stay retrievers flex into position and stay there.

LEDs light the magnetized tip and the shaft bends and stays in position to reach objects in awkward spaces.

Protect against accidental contact with live electrical circuits. These insulated retrievers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The shaft bends and stays in position to reach objects in awkward spaces.

An extra-long shaft and pivoting head lets you access hard-to-reach material from almost any angle.

The head pivots, so you can pick up screws, nuts, bolts, and other small steel objects from any angle.

Adjustable-length retrievers have a telescoping shaft to extend your reach.

LEDs light the magnetized tip for picking up small steel objects in dark areas. Pivot the head to access material from any angle. These retrievers have a telescoping shaft to extend your reach.

Magnetized on all sides, these wand-like tools remove steel chips from machinery, the floor, and your clothing. Pull the plunger to demagnetize and drop the chips into your collection bin.

The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.