About Magnets
More
About Hazardous Location Environmental Ratings
More
About Brightness
More
About Light Appearance
More
Nonmarring Neodymium Magnets
In addition to protecting magnets and mounting surfaces, a rubber coating helps these magnets grip smooth materials. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
Magnetic Stirring Bars
Coated with PTFE, these stirring bars are corrosion and chemical resistant. Some are available in different colors for easy identification.
Octagonal stirring bars are the most commonly used shape. They have a large surface area to generate more turbulence than round bars, so they stir up particles for better mixing.
Yellow | ||||
|---|---|---|---|---|
| OD | Lg. | Coating Material | Each | |
Octagonal | ||||
| 5/16" | 1 1/2" | PTFE Plastic | 00000000 | 000000 |
Magnetic Chart Shapes
These shapes can be written on with a wet erase marker (sold separately) and wiped clean with a damp cloth.
Cut-to-Length Blank Signs
Write on these signs with a permanent marker, use adhesive-back characters (sold separately), or print on them with a silk screen or digital printer.
| Wd. | Thick. | Roll Lg., ft. | Color | Each | |
Blank | |||||
|---|---|---|---|---|---|
Magnetic Back—Vinyl Plastic | |||||
| 24 3/8" | 0.03" | 10 | Yellow | 0000000 | 0000000 |
Particles for Magnetic-Particle Flaw Detection
Reveal imperfections both at and slightly below the surface of your metal part, unlike other flaw detection methods. Use these particles with a magnetic yoke to check for faulty seams, welding defects, and fatigue cracks to make sure metal parts will be safe under high stress. The yoke creates a magnetic field that draws the particles towards flaws, making them easy to spot. To prevent issues with other inspections down the line, make sure to fully demagnetize your part to remove all the particles.
Powder particles withstand higher temperatures than spray particles and are quick to use. They don’t need to dry, which means you can start testing immediately. Shake them out from a bottle or use a powder blower to apply them to your part. You can blow excess particles off even if your part is still magnetized. They come in different colors, so choose what will contrast best with your metal surface.
Container | Application Temp. Range | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Use On | Visibility | Color | Net Weight | Type | Particle Size, microns | Min., °F | Max., °F | Specifications Met | Each | |
Powder | ||||||||||
| Cobalt, Iron, Nickel, Stainless Steel, Steel | Natural Light | Yellow | 10 lbs. | Pail | 80 | Not Rated | 500° | ASTM E1444, ISO 9934, MIL-STD-2132, MIL-STD-271, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271 | 00000000 | 0000000 |
Pivoting-Head Cordless Portable Lights
Aim light where it’s needed most in areas that don't have an electrical outlet.
Style F have a hook that swivels and a magnet on the base to give you a variety of options when mounting them.
Overall | Battery | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Head Adjustability | Lg. | Dia. | Brightness (Battery Life) | Light Setting | Light Appearance | Included | Size | No. Required | Mount Type | Each | |
LED | ||||||||||||
| F | Vertical, Horizontal | 12" | 2 1/2" | 150 lumens (Not Rated) 75 lumens (Not Rated) | High Beam Low Beam | Neutral (4000K) | No | AA | 3 | Hook, Magnetic | 000000 | 000000 |
Wet-Location Cordless Portable Lights
Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.
Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.
Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Dp. | Brightness (Battery Life) | Light Setting | Batteries Included | Battery Charging Time, hrs. | Charger Plug Type | Environmental Rating | Color | Each | |
Rechargeable Batteries | ||||||||||||
Built-In LED | ||||||||||||
| C | 4 3/4" | 2 1/4" | 1" | 300 lumens (Not Rated) 30 lumens (Not Rated) | High Beam Low Beam | Yes | 3 | USB-A | IP54 | Yellow | 0000000 | 000000 |
| D | 9 1/2" | 2" | 1 1/4" | 600 lumens (Not Rated) 60 lumens (Not Rated) | High Beam Low Beam | Yes | 3 | USB-A | IP54 | Yellow | 0000000 | 00000 |
Wet-Location Magnet-Mount Portable Lights
Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working. Strong magnets on the back keep them from sliding down or shaking loose. You can also secure them with a chain (not included) from the eyebolt at the top.
Style A and D have a handle for carrying the lights to your worksite.
Lights with an outlet included can be connected together to avoid running separate extension cords. Link up to 10 lights on one circuit. For increased spacing between lights, you can add an extension cord between them.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Dp. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Electrical Connection Type | Outlet Included | Max. Outlet Current | Wire Gauge | Mount Type | Environmental Rating | Specifications Met | Color | Each | |
Built-In LEDs | ||||||||||||||||
| A | 12" | 12" | 9 1/2" | 4,000 | Cool (5000K) | 6 | Three-Prong Plug | No | __ | 18 | Eyebolt, Magnetic | NEMA 6 | ETL Listed, C-ETL Listed | Yellow | 00000000 | 0000000 |
| B | 11 3/4" | 6 1/4" | 6 5/8" | 1,100 | Cool (5000K) | 6 | Three-Prong Plug | Yes | 10A | 18 | Eyebolt, Magnetic | NEMA 6 | ETL Listed, C-ETL Listed | Yellow | 00000000 | 000000 |
| C | 12 1/2" | 5" | 3 1/2" | 1,200 | Cool (5000K) | 6 | Three-Prong Plug | No | __ | 18 | Eyebolt, Magnetic | NEMA 6 | ETL Listed, C-ETL Listed | Yellow | 00000000 | 000000 |
Hazardous Location Cordless Freestanding Portable Floodlights
Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.
They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.
Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.
Head | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Lg. | Wd. | Dp. | Base Dia. | Brightness (Battery Life) | Light Setting | Light Appearance | Head Adjustability | Batteries Included | Mount Type | Environmental Rating | Each | |
Rechargeable Batteries | |||||||||||||||
Built-In LED | |||||||||||||||
| 8" | 7 1/4" | 3 1/2" | 13 1/2" | 9 1/4" | 5" | 5" | 1,200 lumens (6 hrs.) 650 lumens (12 hrs.) | High Beam Low Beam | Cool (5000K) | Horizontal, Vertical | Yes | Hook, Magnetic | NEC Class I Divisions 1, 2 Groups A, B, C, D; NEC Class II Divisions 1, 2 Groups E, F, G; NEC Class III Divisions 1, 2; NEC Zone 0 Groups IIC, IIB, IIA; IEC Zone 0 Groups IIC, IIB, IIA; IP67 | 000000 | 0000000 |
| Overall Ht. Range | Base Dia. | Material | Color | Each | |
| 34 1/2"-66" | 33 1/2" | Steel | Black | 00000000 | 000000 |