About Cam Latches and Locks
More
Magnet-Mount Hooks
Attach these general purpose hooks to steel walls, cabinets, and other magnetic surfaces.
Twist Style H to turn the magnet off for easy removal and to keep them from sticking to other tools and parts. The sides of the base are also magnetic to keep steel tools such as pliers and screwdrivers in place. The base also has a curved groove, so you can mount them to round surfaces such as pipe.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. | Ht. | Dp. | Cap., lbs. | Material | Base Material | Base Appearance | Each | |
Wall, Under Mount | |||||||||
| B | 7/8" | 7/8" | 1 3/8" | 18 | White Powder-Coated Steel | __ | __ | 00000000 | 00000 |
| B | 1 1/4" | 1 1/4" | 1 3/8" | 61 | White Powder-Coated Steel | __ | __ | 00000000 | 00000 |
| B | 1 7/8" | 1 7/8" | 1 1/2" | 26 | White Powder-Coated Steel | __ | __ | 00000000 | 0000 |
| B | 2 3/4" | 2 3/4" | 1 1/2" | 55 | White Powder-Coated Steel | __ | __ | 00000000 | 0000 |
| H | 1 5/8" | 3 1/2" | 1 7/8" | 25 | Black Powder-Coated Steel | Zinc Plated Steel | Polished | 0000000 | 00000 |
| H | 2 3/4" | 4" | 2 3/4" | 40 | Black Powder-Coated Steel | Zinc Plated Steel | Polished | 0000000 | 000000 |
Slatwall Magnetic Holders
These holders keep steel tools in place magnetically.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Projection | For Center-to-Center Channel Spacing | Material | Base Material | Each | |
| 13" | 3 1/2" | 1 1/8" | 3" | Black Powder-Coated Steel | Black Plastic | 0000000 | 000000 |
Magnetic Holders
These holders keep steel tools and knives in place magnetically.
Styles A-C mount to the wall with screws.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. | Ht. | Dp. | Capacity, lbs. | Material | Number of Mounting Holes | Screw Size  | Mounting Fasteners Included | Each | |
Wall Mount | ||||||||||
Screw Mount | ||||||||||
| A | 6" | 3/4" | 1 1/8" | 120 | Black Powder-Coated Steel | 2 | No. 10 | Yes | 0000000 | 000000 |
| A | 13" | 3/4" | 1 1/8" | 260 | Black Powder-Coated Steel | 2 | No. 10 | Yes | 0000000 | 00000 |
| A | 18" | 3/4" | 1 1/8" | 360 | Black Powder-Coated Steel | 2 | No. 10 | Yes | 000000 | 00000 |
| A | 24" | 3/4" | 1 1/8" | 480 | Black Powder-Coated Steel | 2 | No. 10 | Yes | 000000 | 00000 |
Magnet-Mount Holder Racks
Organize small parts and hand tools with these racks, which attach to steel walls, cabinets, and other magnetic surfaces.
Style B slide out on both sides to provide up to 64 holders and 7 hooks for organizing tools such as screwdrivers, wrenches, and drill bits.
Electronic Status-Indicating Slotted-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a slotted screwdriver (not included) for a simple keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Straight Cam | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Two-Way-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a two-way key (sold separately). Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Sometimes called quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Straight Cam | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
3 mm Key Size | |||||||||||
Black Powder-Coated Zinc | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
5 mm Key Size | |||||||||||
Black Powder-Coated Zinc | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Hex-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a hex key (not included) for a simple keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Straight Cam | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | Hex Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | ||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Square-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
Open these locks with a square key (sold separately)—it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain your enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Locks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Keys | |||||||||||||
| Magnet Location | For Max. Thick. | Latching Distance | Square Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | Each | ||
Black Powder-Coated Zinc | ||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Triangle-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
Open these locks with a triangle key (sold separately). This type of key matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain your enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Locks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Keys | |||||||||||||
| Magnet Location | For Max. Thick. | Latching Distance | Triangle Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | Each | ||
Black Powder-Coated Zinc | ||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
T-Slotted Framing Storage Components
Stay organized with these storage components that work with T-slotted framing.
Magnetic-strip tool holders keep small ferrous objects, such as pliers, screwdrivers, and other hand tools within reach.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Wd. | Projection | Cap., lbs. | Material | Color | Mount Type | Mounting Fasteners Included | Material | Each | |
High Capacity | ||||||||||||
| 1" | 2" | 3" | 6" | 1 1/8" | 120 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 000000 |
| 1" | 2" | 3" | 13" | 1 1/8" | 260 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1" | 2" | 3" | 18" | 1 1/8" | 360 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1" | 2" | 3" | 24" | 1 1/8" | 480 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6" | 1 1/8" | 120 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 13" | 1 1/8" | 260 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 18" | 1 1/8" | 360 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 24" | 1 1/8" | 480 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 45mm | 90mm | __ | 6" | 1 1/8" | 120 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 45mm | 90mm | __ | 13" | 1 1/8" | 260 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 45mm | 90mm | __ | 18" | 1 1/8" | 360 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |
| 45mm | 90mm | __ | 24" | 1 1/8" | 480 | Powder-Coated Steel | Black | Screw On | Yes | Steel | 00000000 | 00000 |