We will reply to your message within an hour.
These arbors with chuck allow drills with a Morse taper spindle to accept standard drill bits.
The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck.
If your Morse taper arbor is too small or large for your machine spindle, insert it into one of these adapters. Also known as sleeves or shell sockets.
Insert your Morse taper arbor into one of these extensions to get additional reach.
The Morse taper end fits into a machine spindle and the threaded end is compatible with a thread-mount drill chuck.
Separate Morse taper shank cutting tools from machinery spindles and Morse taper adapters. These tools are also known as drill drifts and drift keys.
One end is made of soft steel that can be machined to an exact size and shape; the other end is a Morse taper that fits into a machine spindle.
For better control when drilling small holes with a drill press or milling machine, the attachment on these arbors lets you apply light feed pressure with your fingers while the machine rotates the bit.
Drill extremely small holes with a drill press using these adapters. The shank fits into a collet or adjustable drill chuck, and the other end securely holds a wire gauge drill bit.
The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.
Secure a hole saw to a drill or drill press with one of these arbors and use the built-in pilot drill to guide the hole saw.
Switch hole saws without using adapters or special tools.
Pair these arbor adapters with hollow-core cutters when using a manual drill press or milling machine. Hollow-core cutters are also known as annular cutters.
Mount large-diameter reamers to your drill press or other machine with these arbors.