How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Yor-Lok Fittings for Stainless Steel Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
303 stainless steel fittings have good corrosion resistance.

- For Use With: Air, Hydraulic Fluid, Water
- Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
For Tube | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. of Inlets | Pipe Size | OD | Wall Thick. | Body Material | Fitting Material | Max. Pressure | Temp. Range, °F | Each | |
3 Outlets | |||||||||
NPT Threads | |||||||||
2 | 3/8 | 1/4" | 0.28" | 303 Stainless Steel | 316 Stainless Steel | 3,500 psi @ 72° F | -100° to 500° | 00000000 | 0000000 |
2 | 1/2 | 3/8" | 0.49" | 303 Stainless Steel | 316 Stainless Steel | 3,500 psi @ 72° F | -100° to 500° | 00000000 | 000000 |
4 Outlets | |||||||||
NPT Threads | |||||||||
2 | 3/8 | 1/4" | 0.28" | 303 Stainless Steel | 316 Stainless Steel | 3,500 psi @ 72° F | -100° to 500° | 00000000 | 000000 |
2 | 1/2 | 3/8" | 0.49" | 303 Stainless Steel | 316 Stainless Steel | 3,500 psi @ 72° F | -100° to 500° | 0000000 | 000000 |

Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each front sleeve, back sleeve, and nut is made of 316 stainless steel for excellent corrosion resistance. Five sets of sleeves and nuts come on each dispenser. Sleeves are also known as ferrules.

Tube supports are recommended for soft plastic tubing to prevent the tube from collapsing.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | ID | Tube Support Material | Tube Support Style | Temp. Range, °F | Each | |
1/4" | 1/8" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
1/4" | 0.17" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |
1/4" | 0.188" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |
3/8" | 0.188" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |
3/8" | 1/4" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |