How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Brass Push-to-Connect Tube Fittings for Air
- Temperature Range: 0° to 200° F, except nylon plastic fittings are 0° to 150° F
- Tubing: Use with hard nylon plastic or polyethylene plastic
These fittings offer good protection against corrosive environments. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
| Number of Inlets | Pipe Size  | Number of Outlets | For Tube OD | Body Material | Release Ring Material | Max. Pressure | Mount Type | Mounting Fasteners Included | Each | |
NPTF Threads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 3/8 | 4 | 1/4" | Anodized Aluminum | Brass | 150 psi @ 72° F | Screw On | No | 0000000 | 000000 |
| 2 | 3/8 | 4 | 3/8" | Anodized Aluminum | Brass | 150 psi @ 72° F | Screw On | No | 0000000 | 00000 |
| 2 | 3/8 | 6 | 1/4" | Anodized Aluminum | Brass | 150 psi @ 72° F | Screw On | No | 0000000 | 00000 |
| 2 | 3/8 | 8 | 1/4" | Anodized Aluminum | Brass | 150 psi @ 72° F | Screw On | No | 0000000 | 000000 |
NFPA Valve-Mounting Blocks
NFPA valve-mounting blocks have standardized valve mounting patterns to keep hydraulic lines compact and organized.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
Compact Manifolds for Hydraulic Jacks
Connect up to five rams to a single pump. Includes plugs to cover ports not in use.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Ports | Pipe Size | Thread Type | Gender | Max. Pressure, psi | Material | Fasteners Included | No. of Holes | Hole Dia. | Includes | Each | |
| 6 | 3/8 | NPTF | Female | 10,000 | Steel | No | 2 | 1/4" | Four Plugs | 0000000 | 0000000 |
Flow-Adjustment Manifolds for Hydraulic Jacks
Connect up to four rams and a gauge to a pump. Ram connections have flow-adjustment valves that control the flow of oil to adjust ram speed or shut it off to temporarily hold a load. Combine two or more manifolds for larger systems.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Max. Pressure, psi | Material | Includes | Each | |
| 3/8 | NPTF | Female | 10,000 | Steel | 18" Long Rubber Hose | 0000000 | 000000000 |