We will reply to your message within an hour.
Choose only the colors you need.
You can leave the cap off of these markers for up to two weeks without them drying out.
A valve eliminates the risk of seepage caused by the expansion and contraction of a marker due to extreme temperature fluctuations.
Choose the colors you need.
Includes 12 black markers.
The thin inch-long tip allows you to make clear marks in small and confined spaces.
Mark storage containers, processing equipment, and other surfaces in your food plant without risking contamination.
Write on damp surfaces and in wet conditions without smearing.
Marks remain intact when exposed to degreasing solvents such as mineral spirits, mineral oil, gasoline, and most alcohols.
Containing only trace amounts of chlorides and other halogens, these markers safely write on materials that are prone to stress cracking, such as stainless steel and titanium.
Mark surfaces that are exposed to extreme heat. Ink withstands environments 500° F or hotter.
Good for wet environments, the writing from these markers won't come off with water alone.
Pens are sterilized and double bagged to meet requirements for use in ISO Class 5 and Fed. Spec. Class 100 clean rooms and other clean production environments.
Make marks on natural and synthetic fabric.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.
Write on cotton, wool, synthetic blends, and other fabrics with a pigment-based paint that won’t come off in laundering.
These long-life markers hold twice as much paint as our other fabric paint markers.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
These paint crayons work well even on dirty, rusty, and oily surfaces.
Low in chlorides and halogens, these crayons won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Rub the crayon over engraved or stamped characters to make them stand out. Paint completely fills crevices and dries with a luster.
Write on concrete, forgings, castings, and other rough surfaces with these paint crayons.
Marks written at room temperature will hold up through heating and cooling processes. Use on welds, ingots, castings, forgings, and other metal surfaces.
Paint dries immediately when applied to heated metal and won't smear, char, discolor, or peel.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Write on glass, metal, paper, and wood.
Peel away the paper cover to write.
Also known as China markers, these wax-based pencils make marks that won’t wash off with water but can be wiped off with a dry cloth or sanding.
These solid sticks of graphite write vivid lines on concrete, metal, and wood and can mark surfaces up to 1100° F without melting. Also known as lumber crayons.
These pens are pressurized to write at any angle, on wet surfaces, and in extreme cold.
Minimize the buildup of electrostatic charge.
These pens write in black, blue, green, and red ink.
Commonly used in food processing facilities, these pens are made of a plastic that can be detected with a metal-sensing device.
Write at any angle in food-, pharmaceutical-, and cosmetics-processing plants—these pens contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line.
An adhesive-backed base keeps pens where you need them.
Scribble notes and enter data on touch screen devices without removing gloves or leaving smudges.
Includes NEMA colors corresponding to the international color code for numbering.
Plastic tags withstand mild acids and are more corrosion resistant than metal tags.
Guide pedestrian and vehicle traffic.
Touch up small scratches on metal surfaces with these pens.
Mark traffic lanes, parking lots, and factory floors.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
Provide an end point for your belt barrier.
Links split in half and snap back together. Use to connect two lengths of chain.
Instead of a post, use these rings to hang chain between metal surfaces.
Mix-and-match posts and chain to create a barrier that suits your needs.
Connect two lengths of chain to make longer chain barriers.
Slip these covers over any bollard.
Use these cones for quick material identification, inventory control, and pallet staging.
Make parking spaces and traffic lanes. This tape conforms to rough surfaces such as concrete and asphalt.
Tear a strip of tape off the perforated roll for easy, uniform installation.
Find the center of square and round materials, such as structural framing and pipe, and determine setup angles on milling machines and grinders.
This chalk leaves a water-resistant mark that lasts three times longer than marks made with standard powdered chalk.
Load this chalk into chalk line reels to mark straight lines for both indoor and outdoor projects.
Keep an assortment of cable ties on hand.
Take the guesswork out of identifying material—use the attached tag to label the bundle.
The cable ties in these assortments have a smooth body and metal-toothed head, so they cinch close to your bundle. They include different colors to help you identify bundles, equipment, and materials at a glance.
Keep an assortment of large and small cable holders on hand for holding and routing cable across your surface.
These shapes can be written on with a wet erase marker and wiped clean with a damp cloth.
Use this removable adhesive-back tape to make straight rows and columns on planning boards.
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Prevent lubricating errors that can cause bearings and other machinery to wear prematurely by color coding your grease guns.