We will reply to your message within an hour.
The thin inch-long tip allows you to make clear marks in small and confined spaces.
Marks remain intact when exposed to degreasing solvents such as mineral spirits, mineral oil, gasoline, and most alcohols.
Mark surfaces that are exposed to extreme heat. Ink withstands environments 500° F or hotter.
Wash the writing off your surface with water.
Good for wet environments, the writing from these markers won't come off with water alone.
Choose only the colors you need.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.
Write on cotton, wool, synthetic blends, and other fabrics with a pigment-based paint that won’t come off in laundering.
These long-life markers hold twice as much paint as our other fabric paint markers.
Mark surfaces that are exposed to extreme heat.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
These paint crayons work well even on dirty, rusty, and oily surfaces.
Low in chlorides and halogens, these crayons won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Rub the crayon over engraved or stamped characters to make them stand out. Paint completely fills crevices and dries with a luster.
Write on concrete, forgings, castings, and other rough surfaces with these paint crayons.
Marks written at room temperature will hold up through heating and cooling processes. Use on welds, ingots, castings, forgings, and other metal surfaces.
Paint dries immediately when applied to heated metal and won't smear, char, discolor, or peel.
Peel away the paper cover to write.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Write on wet and cold rubber.
Choose from books with letters and symbols or a range of numbers.
These books have characters used in telecom configurations such as L1 and T1.
These books have messages used in electrical systems such as AC and DC.
The characters repeat on these markers so you can wrap them around various-sized wires.
Telecom characters repeat on these markers so you can wrap them around various-sized wires.
Dispensers make it quick and easy to remove the markers you need.
Choose a range of characters. The characters repeat on these markers so you can wrap them around various-sized wires.
These dispensers have a space to write information on a wire marker before using it.
Write a message on these blank markers with a permanent marker, then wrap them around wire or cables.
Choose only the characters you need.
Includes NEMA colors corresponding to the international color code for numbering.
Includes letters, symbols, and ranges of numbers.
Includes a range of numbers.
Notify workers of electrical hazards such as high-voltage equipment and requirements for personal protection.
Label totes, ingredient bags, racks, and other items to keep your food processing plant organized. These tags are laminated with aluminum, so they’ll set off metal detectors if they fall into your line.
A fiber grommet provides tear resistance when hanging these tags.
These tags have a matte surface so writing won't smudge or rub off accidentally.
Tags are vinyl. Write on them with a permanent marker.
These tags have a matte surface so writing won't smudge or rub off accidentally. Write on them with a permanent marker.
Made of Tyvek, these tags withstand mild acids and alkalies. Write on them with a permanent marker.
Plastic tags withstand mild acids and are more corrosion resistant than metal tags.
Color code equipment and inventory.
Specify the message you'd like printed on your sign.
Guide pedestrian and vehicle traffic.
Make parking restrictions clear to drivers.
Designate parking spaces that are accessible.
Clearly label fire hydrants to show their flow rates, if they're out of service, or write your own message.
Mark entrances, employee-only work areas, and no-trespassing zones.
Identify the location of exits throughout a facility.
Identify equipment, enclosures, or other areas at a glance.
These plates have a smudge proof surface that you can write on with permanent marker.
Touch up small scratches on metal surfaces with these pens.
Mark traffic lanes, parking lots, and factory floors.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
Mix-and-match posts and chain to create a barrier that suits your needs.
Links split in half and snap back together. Use to connect two lengths of chain.
Connect two lengths of chain to make longer chain barriers.
Slip these covers over any bollard.
Easily hold this half-moon-shaped chalk to coat snap lines for line marking.
Load this chalk into chalk line reels to mark straight lines for both indoor and outdoor projects.
Wrap these pocket-size tape measures around pipe and fittings to determine size.
These PVC flags are brightly colored and weather resistant.
The flexible bristles on these flags won't flatten if stepped on or run over.
Tie these flags around posts and stakes.
You can easily pull this tape up when it's no longer needed.
Make parking spaces and traffic lanes. This tape conforms to rough surfaces such as concrete and asphalt.
Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.
Tear a strip of tape off the perforated roll for easy, uniform installation.
These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.
Use these footprints to direct traffic in your facility.
Use these cones for quick material identification, inventory control, and pallet staging.
The cable ties in these assortments have a smooth body and metal-toothed head, so they cinch close to your bundle. They include different colors to help you identify bundles, equipment, and materials at a glance.
Keep an assortment of large and small cable holders on hand for holding and routing cable across your surface.
These shapes can be written on with a wet erase marker and wiped clean with a damp cloth.
Use this removable adhesive-back tape to make straight rows and columns on planning boards.
Outline and draw attention to safety zones and hazards with this tape.