We will reply to your message within an hour.
Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.
This general purpose tape is suitable for most packaging applications.
For use in clean rooms, this tape won't leave residue behind.
Seal and label packages in one step.
Seal and color-code bagged parts with this tape.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
This flexible, multipurpose tape offers water resistance with excellent adhesion.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
Our thinnest duct tape, this tape is easy to unwind and tear by hand.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.
Temporarily join rolls of paper and film—this tape won't leave residue behind.
A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.
For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.
Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.
Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.
No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.
Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.
Use color to identify water, gas, and chemical connections.
In addition to withstanding temperatures up to 450° F, these silicone rubber gasket sheets resist water and salts.
A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.
Silicone maintains its flexibility across a wide range of temperatures.
Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.
Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.
One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.
Tape works with Epson label printers.
Use with Dymo LabelManager and LabelWriter models.
This label tape works with Dyno Rhino model printers.
Use this tape with Dymo LetraTag or Office-Mate II embossing label printers.
Use this tape with Sato Primark printers.
Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.
These dispensers make it quick and easy to peel off a label when you’re ready to use one. Dispensers have a serrated edge for cutting.
Identify equipment and materials in low-light conditions.
This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.
Use color to identify equipment, materials, and documents at a glance.
Includes blue, green, red, and yellow labels for color coding to identify equipment, materials, and documents at a glance. These labels easily peel off when they’re no longer needed.
Easily peel these labels off when they’re no longer needed. Use them for color coding to identify equipment, materials, and documents at a glance.
The adhesive on these labels withstands temperatures from -320° to 170° F.
Point to small areas on equipment such as circuit boards.
Apply directly onto clean, dry pipes for clear identification of contents.
Specify the message you need to label the contents of a pipe. Apply these markers directly onto clean, dry pipes.
Use a permanent marker to label the contents of a pipe. Apply directly onto clean, dry pipes.
These fade-resistant pipe markers withstand detergents used in high-pressure cleaning.
Specify the message you need to label a pipe. These fade-resistant pipe markers withstand detergents used in high-pressure cleaning.
Use a permanent marker to label the contents of a pipe. These fade-resistant pipe markers withstand detergents used in high-pressure cleaning.
Identify pipe contents in low-light conditions.
Specify the message you need to label the contents of a pipe in low-light conditions.
Use a permanent marker to label the contents of a pipe. They are reflective so they improve visibility in low-light conditions.
Choose from labels with numbers or days of the week to keep track of inventory.
Project messages and warnings in areas with high traffic or that require frequent cleaning.
Tear a strip of tape off the perforated roll for easy, uniform installation.
Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.
These strips come in measured lengths for easy, peel-and-stick installation.
Stick safety messages and reminders right where they're needed.
These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.
Use these arrows to direct traffic indoors and out.
Thicker than other floor marking arrows, use these abrasion-resistant arrows in high-traffic areas.
Direct traffic in low-light conditions.
Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.
Use these dots to direct traffic in your facility.
Use these footprints to direct traffic in your facility.
Bury this tape above piping and cable to warn excavators and prevent damage.
Tie these flags around posts and stakes.
Attach to curved or flat steel surfaces.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.
This hook and loop meets FMVSS 302 and UL 94 V-2 for flame retardance.
Apply this general purpose tape to any surface that requires traction.
Stretch around hazards and work areas to temporarily restrict access, then dispose of after use.
This barrier tape has a long-lasting woven construction.
Use this removable adhesive-back tape to make straight rows and columns on planning boards.
Keep track of where tools go on pegboards and other wall organizers.
Create custom-length ties from a roll with hook on one side and loop on the other.
The buckle allows you to cinch these ties tight.
Flexible enough for small bundles, these ties are often used for electronics.
These ties meet UL flammability requirements.
These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.
A textured tab on the end makes these cable ties easy to yank open and cinch shut, even when wearing gloves.
Take the guesswork out of identifying material—use the attached tag to label the bundle.
A swivel between the hook and loop and cable tie lets you rotate your bundle 360°.
Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, and adjustable.
This wrap conforms to the contours of any item and adheres to itself.
No need for a separate dispenser—these rolls already have dispensing handles.