The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

Cut these sheets to create a customized, permanent bond in the shape you need.

Cut these sheets to the shape you need for a custom fit.

Mount lightweight signs and trim with this economical tape.

Use this tape outdoors for sealing and mounting signs and security control panels.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

For use in clean rooms, this tape won't leave residue behind.

Get peace of mind when packaging high-value and confidential items—this tape indicates a package has been opened.

Tri-directional fiberglass strands provide extra strength.

Seal and color-code bagged parts with this tape.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

This flexible, multipurpose tape offers water resistance with excellent adhesion.

This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.

Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

Use this glossy tape to seal seams and repair vinyl material such as banners.

With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

Seal glass windows in metal and wood fire-rated doors.

Even after extended compression, these sheets and strips will bounce back to shape.

Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Made from FDA-listed materials for use with food.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

Make parking spaces and traffic lanes. This tape conforms to rough surfaces such as concrete and asphalt.

Stick safety messages and reminders right where they're needed.

Use these arrows to direct traffic indoors and out.

Direct traffic in low-light conditions.

Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.

This label tape works in Brady BMP71 printers.

Use with Brother P-Touch label printers.

This label tape works with Dyno Rhino model printers.

Tape works with Epson label printers.

Designed for Dymo XTL label printers.

Keep track of shipments and inventory—these labels are blank on the front for printing bar codes and text, and have an inlay on the back for encoding with an RFID printer.

These labels peel off easily when they're no longer needed.

Good for large-volume jobs, these labels come on perforated sheets that can be fed continuously through a pin-feed printer.

These dispensers make it quick and easy to peel off a label when you’re ready to use one. Dispensers have a serrated edge for cutting.

This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.

Easily peel these labels off when they’re no longer needed. Use them for color coding to identify equipment, materials, and documents at a glance.

The adhesive on these labels withstands temperatures from -320° to 300° F. Stick them to plastic, glass, and metal surfaces.

Stick these labels on wet or frozen plastic, glass, metal, and paperboard surfaces.

Cut these labels to the desired length.

The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.

These labels have a bar code and are consecutively numbered to keep track of materials.

These books have messages used in electrical systems such as AC and DC.

These books have characters used in telecom configurations such as L1 and T1.

Telecom characters repeat on these markers so you can wrap them around various-sized wires.

These dispensers have a space to write information on a wire marker before using it.

Unroll the length you need and cut with scissors.

Attach to curved or flat steel surfaces.

Permanently mount these rulers on machines, tanks, and walls to measure heights and depths.

Connect continuous segments to create a ruler up to 10 ft. long.

Wrap these pocket-size tape measures around pipe and fittings to determine size.

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.

No need for a separate dispenser—these rolls already have dispensing handles.