Thicker than standard antifatigue mats, these mats have more cushion for greater comfort.

Use these greaseproof mats where grease and oil are constantly present.

Thicker than our other wear-resistant antifatigue mats, these mats have more cushion for greater comfort.

These mats withstand occasional contact with grease.

Use these greaseproof mats where grease and oil are constantly present.

Rated for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.

Use these mats where drainage and slip resistance are a priority.

Use greaseproof mats where grease and oil are constantly present. They're treated to protect the mat against odors and degradation.

Rigid and lightweight, these polyethylene mats resist acids, salt, gasoline, solvents, and chemicals.

These mats withstand occasional contact with grease.

Rigid mats are more durable than flexible mats, withstanding heavy loads and rough use.

These mats meet NSF/ANSI standards for use in food-processing areas.

These mats provide good traction while protecting walkways, ramps, and other high-traffic areas.

With a coarse ceramic/garnet abrasive surface, these mats feel like walking on sandpaper, even in environments where moisture and grease are constantly present.

These mats have an abrasive fiber surface to scrape off dirt, mud, and snow.

Made of galvanized steel, these rust-resistant mats scrape off stubborn mud and snow.

Get three zones of cleaning power in one convenient mat. Zone one is for aggressive scraping, zone two alternates stripes of scraping and drying, and zone three is for drying.

These mats have a smooth backing for use on hard floor surfaces.

Gripping teeth on the bottom hold these mats in place on carpet.

Protect sensitive clean room electronics from harmful static charges. Commonly used in pharmaceutical and laboratory Fed. Std. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

These mats are made up of layers of adhesive-coated sheets. When the top sheet gets dirty, pull the tab to remove it and expose the next clean sheet.

Decontaminate your shoes before entering clean environments. These mats have raised edges so they can be filled with disinfecting solution.

These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.

This tape has an odorless, pressure-sensitive adhesive on both sides to secure mats to the floor.

For use in food plants and other sanitary environments, these drainage mats are brightly marked at six-foot intervals to keep workers at a safe distance and help prevent the spread of illness.

Add edging to vinyl-backed mats for a finished look.

Openings in the surface allow dust, dirt, and liquids to pass through.

Often used in stairwells and hallways, these tiles have a raised-disc surface that provides traction and is easy to clean.

Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.

These liners are treated to protect your tools against rust.

These pads take up less space than creepers for use under extra-low-clearance equipment.

Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.

Absorb spilled liquids and keep them from spreading.

Made from 80% recycled newsprint and cellulose, these sorbent pads, rolls, and socks are more absorbent than polypropylene sorbents.

Store these sorbent pads on your wet-floor sign, so you can quickly soak up oil and water spills while alerting others.

No need to stock several sorbent sizes—these unfold for use as a pad, roll, or pillow.

These sorbents have a coated underside to protect work surfaces from stains and harsh chemicals.

Packed in a bag, these portable kits contain all the supplies you need to quickly clean up spills in areas where food is present.

Be prepared for a variety of chemical spills at your worksite.

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

These soft pads work well for isolating vibration with light loads such as lab and testing equipment.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

With a smaller footprint than other switch mats, these fit in confined spaces.

At only 3/32" thick, these mats fit under carpeting or anywhere else you want to hide them.

Prevent personnel from getting too close to dangerous equipment when equipment is on—these mats turn equipment off when someone steps on them or when a fault is detected.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Pads heal themselves to seal surface nicks and cuts.

Thick foam pads provide a layer of comfort when working on your knees.

Cover floors with these temporary protectors. Adhesive on the back keeps them in place better than taped paper, and they can be left for up to 30 days.

Place either side of these mats against your work surface.

Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

Stronger and more chemical resistant than FEP and PFA film, ETFE film resists cracking over time.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Kapton® polyimide film is an excellent electrical insulator.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Package food, textiles, and other products in wet environments. This film won’t absorb or swell from water.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

This film is often used as a separator when heating parts in an oven.