A thick-gauge metal frame makes these filters more durable than other reusable filters.

Also known as metal mesh filters. These filters can be washed and reused.

An inherent electrostatic charge attracts dust and particles to these filters.

Use in exhaust hoods to remove grease and oil from the air.

Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.

Rated MERV 11, these air filters capture particles down to 1 micron.

Carry these small cleaners to job sites to remove odors and dust from the air.

Larger than portable air cleaners, these air cleaners roll to where you need them.

Often used in machine shops, these cleaners remove oil and coolant mist from the air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.

Generate clean air for instrumentation and applications with critical air requirements.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.

Connect SMC modular filter/regulator/lubricator components with the same series number.

Connect Norgren modular filter/regulator/lubricator components with the same series number.

Connect Wilkerson modular filter/regulator/lubricator components with the same series number.

An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Cool air through refrigeration to condense water vapor.

A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.

Quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. Also known as quick exhaust valves.

Choose the pressure range you need. When these valves receive an air signal, they quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. They're often used with air compressors that require continuous operation. Also known as quick exhaust valves.

Stop dust and other contaminants from entering your process and equipment. Use these filters on blowers, compressors, engines, and in hydraulic systems.

With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.

Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns.

Use one of these compact filters in a tight spot, or combine up to ten for a manifold application.

Stop oil mist and smoke from exiting your equipment and into your environment. These exhaust filters are commonly used with small oil-sealed vacuum pumps.

Clamp these exhaust filters onto oil-sealed, high-vacuum pumps to remove oil, smoke, and other contaminants and keep workplace air clean. Once captured, the oil returns to the pump to be reused.

Use in applications up to 300 psi.

Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.

Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.

A small hex size makes these high-flow mufflers a great fit for cramped spaces.

Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.

Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.

Adjust the flow by turning the screw. Use these mufflers with air-powered tools and cylinders to reduce noise and filter exhaust fumes.

Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30 dB, a reduction that's equivalent to putting in earplugs.

Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.

Keep moisture, dirt, and debris from entering your oil reservoirs.

Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.

Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.