McMaster-Carr

1%
3%
3.5%
4%
6%
6.5%
7%
8%
9%
9.5%
10%
11%
12%
12.5%
13%
14%
14.5%
15%
16%
17%
17.5%
18%
19%
20%
21%
21.5%
22%
22.5%
23%
24%
25%
26%
26.5%
27%
29%
30%
35%
38%
39%
40%
42.5%
43%
44%
45%
47%
50%
55.3%
60%
Not Rated

	Heat Treatable Heat Treatable

Yes

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	Heat Treatment Heat Treatment

	Temper Temper

	Wall Thickness Wall Thickness

	Mechanical Finish Mechanical Finish

	Aluminum Performance Properties Aluminum Performance Properties

	Maximum Hardness After Heat Treatment Maximum Hardness After Heat Treatment

View catalog pages (147)

Forward

How can we improve?

19,744 Products

Multipurpose Low-Carbon Steel

Low-Carbon Steel Sheets and Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Bars
with Rounded Edges

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Tight-Tolerance
Low-Carbon Steel Bars

With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

Zinc-Galvanized Low-Carbon
Steel Sheets and Bars

These sheets and bars are zinc galvanized for good corrosion resistance.

High-Temperature Aluminized
Low-Carbon Steel Sheets

Coated with an aluminum-silicon alloy, these sheets resist corrosion while withstanding long-term exposure to high temperatures. Use in drying ovens, furnaces, and smokestacks.

Nickel-Coated Low-Carbon Steel Bars

In addition to good corrosion resistance, the nickel coating provides better wear resistance than the zinc-galvanized coating.

Mold- and Mildew-Resistant
Low-Carbon Steel Sheets

A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.

Paintable Galvannealed
Low-Carbon Steel Sheets

The galvannealed coating allows these steel sheets to be painted without prepping the surface. They're easier to weld and more scratch resistant than zinc-galvanized steel sheets. Use them for outdoor signs, cabinets, and doors.

Low-Carbon Steel Rods and Discs

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Tight-Tolerance
Low-Carbon Steel Rods

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

Zinc-Galvanized
Low-Carbon Steel Rods

These rods are zinc galvanized for good corrosion resistance.

Chrome-Plated
Low-Carbon Steel Rods

The matte plating on these rods increases corrosion resistance and wear resistance.

Low-Carbon Steel Rectangular Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel U-Channels

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Round Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel T-Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Hex Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Zinc-Galvanized Low-Carbon
Steel 90° Angles

These 90° angles are zinc galvanized for good corrosion resistance.

Low-Carbon Steel 90° Angles

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Half-Ovals

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Half-Rounds

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Zinc-Galvanized Steel Wire

This wire is zinc galvanized for good corrosion resistance.

Low-Carbon Steel Wire

Also known as black-annealed wire.

PVC-Coated Steel Wire

Coated with PVC for corrosion resistance, this carbon steel wire will stand up to outdoor use.

Easy-to-Machine Carbon Steel

Easy-to-Machine 1215
Carbon Steel Bars

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Easy-to-Machine 1215
Carbon Steel Rods

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Tight-Tolerance Easy-to-Machine
1215 Carbon Steel Rods

Precision ground and held to a strict tightness tolerance, these rods are ready for turning in a lathe.

Easy-to-Machine 1215
Carbon Steel Hex Bars

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Ultra-Machinable 12L14
Carbon Steel Bars

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Ultra-Machinable 12L14
Carbon Steel Hex Bars

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Ultra-Machinable 12L14
Carbon Steel Rods

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Tight-Tolerance Ultra-Machinable
12L14 Carbon Steel Rods

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

Easy-to-Machine 1117 Carbon Steel

1117 carbon steel responds to surface-hardening heat treatment better than other easy-to-machine carbon steels. Use it to fabricate shaft couplings, studs, pins, and universal joints.

High-Strength Easy-to-Machine
1144 Carbon Steel Rods

Often called Stressproof, these rods are stress-relieved to minimize warping during machining.

Tight-Tolerance High-Strength
Easy-to-Machine 1144
Carbon Steel Rods

These rods are precision ground and held to a strict straightness tolerance, so they're all set for turning applications in your lathe.

Ultra-Strength Easy-to-Machine
1144 Carbon Steel Rods

Also known as Fatigueproof, these rods have enhanced strength and resistance to breaking from repeated impact compared to High-Strength Easy-to-Machine 1144 Carbon Steel Rods.

High-Strength 1045 Carbon Steel

High-Strength 1045 Carbon Steel Bars

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

High-Strength 1045 Carbon
Steel Rods and Discs

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

Impact-Resistant A516 Carbon Steel

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Ultra-Wear-Resistant AR500 Carbon Steel

Ultra-Wear-Resistant
AR500 Carbon Steel

Exceptional hardness makes AR500 carbon steel more resistant to wear and impact than other carbon steel.

Wear-Resistant AR400 Carbon Steel

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

Ultra-Strength Carbon Steel

Ultra-Strength Carbon Steel
(AHSS) Round Tubes

The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Ultra-Strength Carbon
Steel (UHSS) Sheets

This UHSS (ultra high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Alloy Steel

Tight-Tolerance Hardened
Multipurpose 4140 Alloy
Steel Sheets and Bars

Also known as flat stock, the thickness on these sheets and bars is held to a tight tolerance.

Oversized Hardened Multipurpose
4140 Alloy Steel Bars

Because the thickness is oversized, you can finish these bars to your exact requirements.

Hardened Multipurpose
4140 Alloy Steel Bars

These sheets and bars are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

Multipurpose 4140 Alloy Steel Bars

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Oversized Multipurpose
4140 Alloy Steel Sheets

The thickness is oversized for finishing to your exact requirements.

Multipurpose 4140 Alloy
Steel Rods and Discs

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Chrome-Plated Hardened
Multipurpose 4140 Alloy Steel Rods

The chrome plating on these rods increases corrosion resistance.

Hardened Multipurpose
4140 Alloy Steel Rods

These rods are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

Tight-Tolerance Multipurpose
4140 Alloy Steel Rods

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.

High-Strength Multipurpose
4140 Alloy Steel Rods

Often called ETD-150, these rods are made from a modified version of 4140 alloy steel and have been drawn at high temperatures for excellent strength.

Hardened Multipurpose
4140 Alloy Steel Hex Bars

These hex bars are hardened for increased abrasion and impact resistance. They are also stress relieved to reduce the chance of warping during machining.

Multipurpose 4140 Alloy Steel Tubes

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Multipurpose 4140
Alloy Steel Hex Bars

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Easy-to-Weld 4130 Alloy
Steel Rectangular Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for structural applications.

Easy-to-Weld 4130 Alloy Steel
Round Tubes with Certification

All come with a traceable lot number and test report.

Easy-to-Weld 4130 Alloy
Steel Sheets and Bars

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld 4130 Alloy Steel Rods

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld 4130
Alloy Steel Round Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld A572 Alloy
Steel Sheets and Bars

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

Hardened High-Strength
A514 Alloy Steel

Heat treated for enhanced hardness and strength, A514 alloy steel is suitable for structural applications and supporting heavy loads.

Fatigue-Resistant High-Strength
300M Alloy Steel Rods

A modified version of 4340 alloy steel, 300M is used in applications that require high yield strength, such as torsion bars and drive shafts.

High-Strength 4340 Alloy Steel Rods

Use for power transmission and structural applications that involve extreme impact, heat, and wear.

Wear-Resistant 4150 Alloy Steel

Often used for gears, shafts, and ball screws, 4150 alloy steel resists wear from friction and abrasion.

Fatigue-Resistant 9310 Alloy Steel

A vacuum arc remelting (VAR) casting process gives 9310 superior strength, hardness, and fatigue resistance over other types of alloy steel. It's often machined into heavy duty gears, clutch parts, and ratchets.

Easy-to-Machine 41L40 Alloy Steel

The addition of lead gives 41L40 the best machinability of all the alloy steel we offer.

Corrosion-Resistant A588 Alloy Steel

Also known as weathering steel, this high-strength steel develops a thin layer of rust over time in outdoor environments that protects the inner steel from corrosion.

Easy-to-Weld Wear-Resistant
8620 Alloy Steel

While the low carbon content makes 8620 alloy steel easy-to-weld, it's the nickel, chromium, and molybdenum content that provides wear resistance.

Hard Wear-Resistant
52100 Alloy Steel Rods

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.

High-Strength C300 Alloy Steel

Offering excellent resistance to cracking from impact and compression, C300 alloy steel is often used for dies and tooling. It is also known as maraging steel and VascoMax.

Spring Steel

Wear-Resistant 1095 Spring
Steel Sheets and Strips

Also known as blue-tempered steel.

Easy-to-Form Wear-Resistant 1095
Spring Steel Sheets with Certification

All come with a traceable lot number and test report.

Easy-to-Form Wear-Resistant
1095 Spring Steel Sheets

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Stress-Resistant 5160 Alloy Steel

5160 alloy steel handles repeated cycles of stress without breaking just like spring steel. It’s often used to make flat springs.

1075 Spring Steel Strips

Also known as scaleless blue steel.

Lubricated 1065 Spring Steel Wire

This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire.

Easy-to-Form 1075
Spring Steel Sheets

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Easy-to-Form 1075 Spring
Steel Sheets with Certification

Each sheet comes with a traceable lot number and test report.

Lubricated 1065 Spring
Steel Wire Assortments

Always have the right size wire on hand with a 72-piece assortment.

Lubricated 1080 Spring Steel Wire

Also known as music wire.

Cast Iron

Impact-Resistant Ductile
Cast Iron Rods and Discs

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Oversized Easy-to-Machine
Gray Cast Iron Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Oversized Tight-Tolerance
Easy-to-Machine Gray Cast Iron Rods

Precision ground to a tight diameter tolerance, these rods are ready for turning in your lathe.

Easy-to-Machine Gray
Cast Iron Sheets and Bars

Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, and bushings.

Impact-Resistant
Ductile Cast Iron Bars

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Easy-to-Machine
Gray Cast Iron Tubes

Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, rollers, and bushings.

Multipurpose 6061 Aluminum

Multipurpose 6061
Aluminum Sheets and Bars

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Tight-Tolerance Multipurpose
6061 Aluminum Sheets and Bars

These sheets and bars are precision ground either on all six sides or just on the top and bottom.

Multipurpose 6061 Aluminum
Sheets and Bars with Certification

All of these sheets and bars come with a traceable lot number and test report.

Polished Multipurpose 6061
Aluminum Sheets and Bars

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Anodized Multipurpose 6061
Aluminum Sheets and Bars

An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.

Oversized Multipurpose
6061 Aluminum Sheets

The thickness is oversized to allow for finishing to exact requirements.

Multipurpose 6061
Aluminum Rods and Discs

Multipurpose 6061 Aluminum
Rods with Certification

These rods come with a traceable lot number and test report.

Tight-Tolerance Multipurpose
6061 Aluminum Rods and Discs

These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.

Anodized Multipurpose
6061 Aluminum Rods

An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

Polished Multipurpose
6061 Aluminum Rods

Choose between rods that are polished to a brushed finish or a mirror-like finish.

Chrome-Plated Multipurpose
6061 Aluminum Rods

The matte plating on these rods, sometimes called industrial chrome and hard chrome, creates a slippery surface that minimizes galling and prevents parts from seizing.

Multipurpose 6061
Aluminum Hex Bars

Anodized Multipurpose
6061 Aluminum Hex Bars

A hard-anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

Multipurpose 6061
Aluminum U-Channels

Multipurpose 6061 Aluminum
Rectangular Tubes

Multipurpose 6061 Aluminum T-Bars

Multipurpose 6061
Aluminum Round Tubes

Anodized Multipurpose 6061
Aluminum Round Tubes

An anodized coating forms a bond to the inside, outside, and ends of these tubes to improve wear and corrosion resistance.

Polished Multipurpose 6061
Aluminum Round Tubes

Polished on the outside to a #8 reflective, mirror-like finish, these tubes have no visible grain lines.

Multipurpose 6061
Aluminum Half-Round Bars

Multipurpose 6061
Aluminum Hex Tubes

Polished Multipurpose
6061 Aluminum 90° Angles

The outside of these 90° angles is polished to either a brushed finish or a mirror-like finish.

Anodized Multipurpose
6061 Aluminum 90° Angles

An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

Multipurpose 6061
Aluminum 90° Angles

Multipurpose 6061 Aluminum
90° Angles with Certification

All come with a traceable lot number and test report.

Multipurpose 6061 Aluminum I-Beams

Also known as American Standard I-Beams, these I-beams have rounded corners.

Multipurpose 6061 Aluminum Z-Bars

Architectural 6063 Aluminum

Architectural 6063 Aluminum Bars

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063 Aluminum
Bars with Rounded Edges

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063 Aluminum H-Bars

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063
Aluminum U-Channels

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Anodized Architectural 6063
Aluminum U-Channels

An anodized coating on these U-channels forms a bond with the aluminum surface to improve wear and corrosion resistance.

Architectural 6063
Aluminum 90° Angles

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063 Aluminum
Rectangular Tubes

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063 Aluminum
Double-Wall Round Tubes

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Anodized Architectural
6063 Aluminum 90° Angles

The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance.

Architectural 6063
Aluminum Round Tubes

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Architectural 6063 Aluminum Rods

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Anodized Architectural 6063
Aluminum Round Tubes

The outside of these tubes is anodized to improve wear and corrosion resistance.

High-Strength 6013 Aluminum

High-Strength 6013 Aluminum Rods

As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.

High-Strength 6013 Aluminum Sheets

Easy-to-Machine 6020 Aluminum

Frequently used to make valve bodies, pistons, and hydraulic parts, 6020 aluminum is easier to machine and more corrosion resistant than 6061, but it is not as weldable.

Highly Conductive 6101 Aluminum

6101 aluminum is chiefly used as a lightweight and economical alternative to copper in electrical applications, such as bus bars in switchboards and battery banks.

Easy-to-Machine 2011 Aluminum

Easy-to-Machine
2011 Aluminum Bars

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

Easy-to-Machine
2011 Aluminum Rods

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

Tight-Tolerance Easy-to-Machine
2011 Aluminum Rods

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in a lathe.

Easy-to-Machine 2011
Aluminum Hex Bars

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

High-Strength 2024 Aluminum

High-Strength 2024
Aluminum Sheets and Bars

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Tight-Tolerance High-Strength
2024 Aluminum Sheets and Bars

Also known as flat stock, these sheets and bars are precision ground on the top and bottom.

High-Strength 2024 Aluminum
Sheets with Certification

All come with a traceable lot number and test report.

Clad High-Strength
2024 Aluminum Sheets

These sheets are clad in 1230 aluminum for an added layer of corrosion resistance.

High-Strength 2024
Aluminum Hex Bars

High-Strength 2024
Aluminum Rods and Discs

Tight-Tolerance High-Strength
2024 Aluminum Rods

These rods are precision ground and held to a strict straightness tolerance, so they’re ready for turning in a lathe.

High-Strength 2024 Aluminum Tubes

High-Strength 2024 Aluminum Z-Bars

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.

High-Strength 2024
Aluminum 90° Angles

High-Strength 2024 Aluminum T-Bars

Mold-Quality Aluminum

Porous Mold-Quality
Metapor Aluminum

Create molds for vacuum-forming and thermoforming applications. Metapor aluminum is porous to let air and moisture escape, which prevents bubbles and blemishes.

High-Strength Mold-Quality
QC-10 Aluminum

Designed for use as production injection molds and blow molds, QC-10 is extremely strong with a hard surface and excellent thermal conductivity.

Fatigue-Resistant 7050 Aluminum

Substitute 7050 aluminum for 7075 in structural applications when high stress-corrosion resistance is required. It is the same material that's used for bulkheads and fuselage frames.

High-Strength 7075 Aluminum

Tight-Tolerance High-Strength
7075 Aluminum Sheets and Bars

Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.

High-Strength 7075
Aluminum Rods and Discs

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

High-Strength 7075 Aluminum
Sheets with Certification

All come with a traceable lot number and test report.

High-Strength 7075
Aluminum Sheets and Bars

High-Strength 7075
Aluminum 90° Angles

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Tight-Tolerance High-Strength
7075 Aluminum Rods

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

Corrosion-Resistant Aluminum

Easy-to-Weld 5052
Aluminum Sheets and Bars

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

Polished Easy-to-Weld 5052
Aluminum Sheets and Bars

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Easy-to-Weld 5052 Aluminum Tubes

Impact-Resistant Marine-Grade
5083 Aluminum Sheets

Also known as armor plate, these 5083 aluminum sheets are hardened to an H131 temper for increased strength and impact resistance over standard 5083 sheets.

Telescoping Corrosion-Resistant
3003 Aluminum Tubes

These tubes are sized so that each tube fits into the next larger size.

Choose-a-Color 5005 Aluminum

A black, gold, or silver anodized finish protects this 5005 aluminum from wear and abrasion.

Corrosion-Resistant 3003
Aluminum Sheets and Bars

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.

Easy-to-Form Pure 1100
Aluminum Sheets and Bars

Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.

Choose-a-Color Corrosion-Resistant
3003 Aluminum Sheets

One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.

Easy-to-Form Marine-Grade
5086 Aluminum 90° Angles

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

Easy-to-Form Marine-Grade
5086 Aluminum Tubes

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

Textured Corrosion-Resistant
3003 Aluminum Sheets

The textured surface on these sheets increases rigidity and hides fingerprints and dents.

Contaminant-Free
High-Vacuum Aluminum Foil

Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.

Easy-to-Form 1100 Aluminum Wire

This wire has a soft temper and will stay in place when bent.

High-Strength Marine-Grade
5456 Aluminum

Stronger than other marine-grade aluminum, 5456 is often used for pressure vessels and storage tanks in saltwater environments.

Marine-Grade 5083
Aluminum Sheets and Bars

Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.

Hardened Easy-to-Form Pure
1100 Aluminum Sheets and Bars

These sheets and bars are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.

Corrosion-Resistant 3003
Aluminum Honeycomb Panels

A honeycomb core is bonded between two aluminum sheets for rigidity.

Corrosion-Resistant 3003
Aluminum Texture Selector Packs

Includes one 1-1/2"×3"×0.032" thick piece of each texture: weave, diamond, and tread.

Corrosion-Resistant 3003
Aluminum Honeycomb Cores

The honeycomb design provides a higher strength-to-weight ratio than solid sheets.

Corrosion-Resistant
3003 Aluminum Tubes

Easy-to-Form Marine-Grade
5086 Aluminum Sheets and Bars

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

Easy-to-Machine Cast Aluminum for Tool and Jig Plates

Easy-to-Machine Cast Aluminum
for Tool and Jig Plates

Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.

Easy-to-Machine MIC6 Cast
Aluminum Sheets and Bars

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.

Easy-to-Machine MIC6
Cast Aluminum Discs

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.

Lightweight A356 Aluminum Foam

Air is injected into the casting of this A356 aluminum to reduce weight and create a crater-like appearance. This foam is often used for sound insulation and architectural facades.

Multipurpose Stainless Steel

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Multipurpose 304 Stainless
Steel with Certification

All come with a traceable lot number and test report.

Tight-Tolerance Multipurpose
304 Stainless Steel

This material has tighter tolerances than standard 304 stainless steel.

Polished Multipurpose
304 Stainless Steel

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Hardened Multipurpose
304 Stainless Steel

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

Bend-and-Stay Multipurpose
304 Stainless Steel Wire

Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

304 Multipurpose Stainless
Steel Selector Packs

Compare the appearance choices of our 304 stainless steel with these convenient selector packs.

Easy-to-Machine Multipurpose
304 Stainless Steel

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

Textured Multipurpose
304 Stainless Steel

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Spring-Back Multipurpose
304 Stainless Steel Wire

This wire bounces back after bending. It’s often used to construct springs and wire rope.

Tight-Tolerance Easy-to-Machine
303 Stainless Steel

This material has tighter tolerances than standard 303 stainless steel.

Tight-Tolerance Easy-to-Machine
303 Stainless Steel with Certification

In addition to having tight tolerances, this material comes with a traceable lot number and test report.

Easy-to-Machine 303 Stainless Steel

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Easy-to-Machine 303 Stainless
Steel with Certification

A traceable lot number and test report is furnished with each piece.

Shaft-Quality Nitronic
60 Stainless Steel

Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.

Fatigue-Resistant 301 Stainless
Steel with Certification

All of these sheets come with a traceable lot number and test report.

Polished Economical
430 Stainless Steel

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Shaft-Quality Nitronic 60
Stainless Steel with Certification

These rods come with a traceable lot number and test report.

Bend-and-Stay Economical
430 Stainless Steel Wire

When bent, this wire will stay in place. It's widely used as tying and locking wire.

Fatigue-Resistant 301 Stainless Steel

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

Economical 430 Stainless Steel

Use 430 stainless steel in decorative and light structural applications, rather than outdoors or in extreme temperatures.

High-Strength Stainless Steel

High-Strength 17-4 PH Stainless Steel

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Tight-Tolerance High-Strength
17-4 PH Stainless Steel

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

Tight-Tolerance High-Strength 17-4
PH Stainless Steel with Certification

These precision-ground rods are ready for turning in a lathe. They're furnished with a traceable lot number and test report.

Hardened High-Strength
17-4 PH Stainless Steel

This material is hardened for improved strength and wear resistance.

Easy-to-Machine High-Strength
17-4 PH Stainless Steel

Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.

High-Strength 17-4 PH
Stainless Steel with Certification

All come with a traceable lot number and test report.

Hardened Tight-Tolerance
High-Strength 17-4 PH
Stainless Steel with Certification

Furnished with a traceable lot number and test report, these rods are hardened for improved strength and wear resistance. They are precision-ground and held to a strict diameter tolerance, so they’re all set for turning in your lathe.

Hardened Tight-Tolerance
High-Strength 17-4 PH Stainless Steel

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

Durable A286 Stainless Steel

Widely used to fabricate fasteners and engine components, A286 will maintain its strength as temperatures rise.

Tough 15-5 PH Stainless Steel

Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.

Easy-to-Harden 13-8
PH Stainless Steel

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

Easy-to-Form 17-7 PH Stainless Steel

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

Highly Corrosion-Resistant Stainless Steel

Passivated Corrosion-Resistant
316 Stainless Steel

These rods have been passivated for enhanced corrosion resistance.

Corrosion-Resistant
316 Stainless Steel

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Corrosion-Resistant 316
Stainless Steel Selector Packs

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

Polished Corrosion-Resistant
316 Stainless Steel

One side of these sheets is polished to either a brushed or mirror-like finish.

Bend-and-Stay Corrosion-Resistant
316 Stainless Steel Wire

Bend this wire and it will stay in place. It's widely used as tying and locking wire.

Easy-to-Machine Corrosion-Resistant
316 Stainless Steel

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

Corrosion-Resistant 316
Stainless Steel with Certification

All come with a traceable lot number and test report.

Hardened Corrosion-Resistant
316 Stainless Steel

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

Tight-Tolerance Corrosion-Resistant
316 Stainless Steel

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

Spring-Back Corrosion-Resistant
316 Stainless Steel Wire

This wire will spring back after bending. It's often used to make springs and wire rope.

Marine-Grade Nitronic
50 Stainless Steel

Stronger and more corrosion resistant than 316 stainless steel, Nitronic 50 is especially well-suited for use as shafts and fixtures in marine environments.

Stress-Corrosion-Resistant
2205 Stainless Steel

2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.

Ultra-Corrosion-Resistant
Alloy 20 Stainless Steel

A high nickel content allows Alloy 20 stainless steel to stand up to harsh chemicals in caustic environments. It's also known as Carpenter 20.

High-Temperature Stainless Steel

Weldable 321 Stainless Steel

The titanium content of 321 stainless steel preserves corrosion resistance around weld points.

High-Temperature
309/310 Stainless Steel

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Ultra-High-Temperature
330 Stainless Steel

Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.

Wear-Resistant Stainless Steel

Very-Wear-Resistant
420 Stainless Steel

Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.

Wear-Resistant 410 Stainless
Steel with Certification

Furnished with a traceable lot number and test report.

Bend-and-Stay Wear-Resistant
410 Stainless Steel Wire

Bend this wire and it will stay in place. It's commonly used as tying and locking wire.

Oversized Bearing-Quality
440C Stainless Steel

The width and thickness are oversized for finishing to your exact requirements.

Hardened Very-Wear-Resistant
420 Stainless Steel

This material is hardened for increased wear resistance over standard 420 stainless steel.

Tight-Tolerance Very-Wear-Resistant
420 Stainless Steel

Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.

Impact-Resistant 440A Stainless Steel

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

Tight-Tolerance Easy-to-Machine
416 Stainless Steel

Precision ground to a tight diameter tolerance, these rods are all set for turning applications in a lathe.

Tight-Tolerance Bearing-Quality
440C Stainless Steel

Ready for turning in your lathe, these rods are precision ground to a tight tolerance.

Tight-Tolerance Bearing-Quality
440C Stainless Steel with Certification

Furnished with a traceable lot number and test report, these precision-ground rods are ready for turning applications in a lathe.

Tight-Tolerance Wear-Resistant
410 Stainless Steel

Precision ground on the top and bottom to a tight tolerance.

Bearing-Quality 440C Stainless Steel

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

Hardened Tight-Tolerance
Easy-to-Machine 416 Stainless Steel

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

Tight-Tolerance Hardened
440C Stainless Steel

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

Blade-Quality S30V Stainless Steel

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

Wear-Resistant 410 Stainless Steel

Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.

Ultra-Wear-Resistant
420V Stainless Steel

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

Easy-to-Machine 416 Stainless Steel

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

Multipurpose Air-Hardening A2 Tool Steel

Oversized Multipurpose Air-Hardening
A2 Tool Steel Sheets and Bars

The thickness, length, and width are oversized for finishing to your exact requirements.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool
Steel Sheets and Bars

These sheets and bars are precision ground to a tight thickness tolerance.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Bars with Certification

All of these bars come with a traceable lot number and test report. They're precision ground to a tight thickness tolerance.

Oversized Multipurpose Air-Hardening
A2 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Hardened
Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Hardened for increased abrasion and impact resistance, these rods are precision ground with a tight diameter tolerance.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Rods with Certification

All come with a traceable lot number and test report. These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in your lathe.

Multipurpose Oil-Hardening O1 Tool Steel

Oversized Multipurpose
Oil-Hardening O1 Tool Steel Bars

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool
Steel Sheets and Bars

These precision-ground sheets and bars are held to a tight thickness tolerance.

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel
Bars with Certification

All come with a traceable lot number and test report. The thickness on these bars is precision ground and held to a tight tolerance.

Oversized Multipurpose Oil-Hardening
O1 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Hardened
Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Hardened for increased abrasion and impact resistance, these precision-ground rods have a tight diameter tolerance and are ready for turning in your lathe.

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.

Wear-Resistant D2 Tool Steel

Tight-Tolerance Wear-Resistant
D2 Tool Steel Rods

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

Tight-Tolerance Wear-Resistant
D2 Tool Steel Bars

The thickness on these bars is precision ground to a tight tolerance.

Oversized Wear-Resistant D2
Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Oversized Wear-Resistant
D2 Tool Steel Bars

The thickness, length, and width are oversized for finishing to your exact requirements.

High-Speed Tool Steel

Hardened Oversized
High-Speed M2 Tool Steel Rods

Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.

Hardened Undersized High-Speed
M2 Tool Steel Rod Sets

These rod sets are supplied in a metal index case with fold-out panels.

Hardened High-Speed
M2 Tool Steel Sheets

Hardened for increased abrasion and impact resistance.

Hardened Undersized
High-Speed M2 Tool Steel Rods

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.

Tight-Tolerance High-Speed
M2 Tool Steel Bars

These bars are precision ground to a tight thickness tolerance.

Oversized High-Speed
M2 Tool Steel Rods

An oversized diameter allows for finishing to your exact requirements.

Tight-Tolerance High-Speed
M2 Tool Steel Rods

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

Hardened High-Speed M42 Tool Steel

Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.

Wear-Resistant High-Speed
M4 Tool Steel Rods

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

Wear-Resistant High-Speed
M4 Tool Steel Bars

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

Shock-Resistant S7 Tool Steel

Oversized Shock-Resistant
S7 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Oversized Shock-Resistant
S7 Tool Steel Bars

These bars have an oversized thickness, length, and width for finishing to your exact requirements.

Tight-Tolerance Shock-Resistant
S7 Tool Steel Bars

The thickness on these bars is precision ground to a tight tolerance.

Tight-Tolerance Shock-Resistant
S7 Tool Steel Rods

The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.

High-Temperature H13 Tool Steel

Oversized High-Temperature
H13 Tool Steel Bars

Oversized for finishing to your exact requirements.

Oversized High-Temperature
H13 Tool Steel Rods

An oversized diameter allows finishing to your exact requirements.

Easy-to-Machine W1 Tool Steel

Easy-to-Machine W1 Tool Steel Bars

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

Tight-Tolerance Easy-to-Machine
W1 Tool Steel Rods

Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.

Hardened Easy-to-Machine P20 Tool Steel

Hardened Easy-to-Machine
P20 Tool Steel

Furnished hardened, P20 tool steel is strong and easy to machine. It has the wear resistance and highly polishable surface needed to fabricate long-lasting molds and dies.

Ultra-Wear-Resistant A11 Tool Steel

Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.

Brass

Ultra-Machinable 360 Brass Bars

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

Ultra-Machinable 360 Brass
Bars with Certification

These bars come with a traceable lot number and test report.

Easy-to-Machine
Architectural 385 Brass Bars

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Easy-to-Machine
Architectural 385 Brass Rods

Tight-Tolerance Ultra-Machinable
360 Brass Rods

The diameter of these rods is held to a ±0.0002" tolerance.

Easy-to-Machine Architectural
385 Brass 90° Angles

Easy-to-Machine Architectural
385 Brass U-Channels

Ultra-Machinable 360 Brass Hex Bars

Formable Easy-to-Machine
353 Brass Sheets and Bars

353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.

Formable Easy-to-Machine 353
Brass Bars with Certification

These bars come with a traceable lot number and test report.

Mirror-Like Weldable
Marine-Grade 464 Brass Sheets

Polished on one side to a reflective, mirror-like finish.

Ultra-Formable 260
Brass Round Tubes

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

High-Strength 330 Brass

Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.

Brushed Ultra-Formable
260 Brass Sheets

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Weldable Marine-Grade
464 Brass Sheets and Bars

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

Ultra-Formable 260 Brass Hex Tubes

Mirror-Like Ultra-Formable
260 Brass Sheets

Polished on one side to a reflective, mirror-like finish.

Ultra-Formable 260
Brass Sheets and Strips

Ultra-Formable 260 Brass Sheets
and Strips with Certification

These sheets and strips come with a traceable lot number and test report.

Ultra-Formable 260
Brass Rectangular Tubes

Brushed Weldable
Marine-Grade 464 Brass Sheets

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Copper

Multipurpose 110
Copper Rods and Discs

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Multipurpose 110
Copper Sheets and Bars

Mirror-Like Multipurpose
110 Copper Sheets

Polished on one side to a reflective, mirror-like finish.

Silver-Plated Multipurpose 110
Copper Bars with Rounded Edges

An ultra-thin layer of silver makes these bars slower to tarnish than unplated copper to provide low electrical resistance at contact points over time.

Multipurpose 110 Copper
Bars with Rounded Edges

Multipurpose 110 Copper Sheets
and Bars with Certification

These sheets and bars come with a traceable lot number and test report.

Multipurpose 110 Copper
Appearance Selector Packs

Includes one 4" × 4" × 0.032" thick piece of 110 copper in the following finishes: plain, brushed, and mirror-like.

Brushed Multipurpose
110 Copper Sheets

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Easy-to-Machine 145 Copper Rods

Also called tellurium copper, 145 copper contains tellurium, which makes it more machinable than all other copper while maintaining good corrosion resistance and high electrical conductivity. It’s often used for transformer and circuit-breaker terminals, welding torch tips, and fasteners.

Easy-to-Machine 145 Copper Bars

Super-Conductive 101 Copper Tubes

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

Super-Conductive 101
Copper Sheets and Bars

Titanium-Clad Super-Conductive
101 Copper Rods

A thin layer of titanium is bonded to these copper rods for long life and dimensional stability in corrosive environments.

Weldable 122 Copper Tubes

The addition of phosphorus makes 122 copper easier to weld and braze than 110 copper. It has excellent resistance to corrosion caused by water, soil, and weather, making it the go-to material for plumbing and underground applications.

High-Strength 182 Copper Rods

182 copper is stronger, harder, and more wear resistant than 110 copper. Also known as RWMA Class 2 chromium copper, it's commonly used in resistance welding, for circuit-breaker parts, and for molds to make plastic parts.

High-Strength 182 Copper Hex Bars

Super-Conductive 101
Copper Rods and Discs

High-Strength 182 Copper Bars

Bronze

Ultra-Strength Easy-to-Form
510 Bronze Sheets

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

Easy-to-Machine 316 Bronze

Also known as leaded commercial bronze, 316 contains lead for good machinability.

High-Strength 630 Bronze

The addition of nickel gives 630 bronze high strength. It is also called aluminum-nickel-bronze.

Easy-to-Form 220 Bronze

Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. It's commonly called commercial bronze.

Ultra-Strength Easy-to-Form
510 Bronze Rods

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

Easy-to-Machine
High-Strength 642 Bronze

A low-lead alternative to 316 bronze, 642 bronze is just as machinable with higher strength. It is also called aluminum-silicon-bronze.

Easy-to-Weld 655 Bronze

Commonly called silicon-bronze, 655 bronze contains more silicon than other bronze alloys, making it suitable for all types of welding.

High-Strength Machinable 955 Bronze

For a good combination of strength, machinability, and weldability, choose 955 bronze.

High-Strength 630
Bronze with Certification

All come with a traceable lot number and test report.

Bearing Bronze

932 Bearing Bronze Tubes

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

High-Strength Formable
544 Bearing Bronze

Known for its ability to resist stress cracking and fatigue, 544 bronze also offers good formability and excellent machinability. It's commonly called phosphor bronze.

Oil-Filled 840 and 841
Bearing Bronze Sheets

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

Oil-Filled 841 Bearing Bronze Rods

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

Oversized Weldable 954
Bearing Bronze Bars

Thickness and width are oversized to allow for finishing.

Easy-to-Machine 936
Bearing Bronze Tubes

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Oversized 932 Bearing Bronze Rods

Diameter is oversized to allow for finishing.

High-Temperature Graphite-Filled
841 Bearing Bronze Rods

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

Oversized 932 Bearing Bronze Bars

The thickness and width are oversized to allow for finishing.

Ultra-Wear-Resistant
AMPCO® 18 Bearing Bronze

AMPCO® 18 is a premium aluminum-bronze alloy that combines strength with superior wear resistance.

Easy-to-Machine 936
Bearing Bronze Rods

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

High-Strength 863
Bearing Bronze Rods

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

Easy-to-Machine 936
Bearing Bronze Bars

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

High-Temperature Graphite-Filled
841 Bearing Bronze Tubes

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

Tight-Tolerance Weldable
954 Bearing Bronze Bars

These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".

Weldable 954 Bearing Bronze Rods

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.

High-Strength 863
Bearing Bronze Tubes

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

Tight-Tolerance 932
Bearing Bronze Bars

Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002".

Tight-Tolerance 932
Bearing Bronze Rods

These rods are precision ground for a tight diameter tolerance of ±0.0005".

Oil-Filled 841 Bearing Bronze Tubes

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

Weldable 954 Bearing Bronze Tubes

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

Titanium

High-Strength Grade 5
Titanium Sheets and Bars

Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.

High-Strength Grade 5 Titanium
Sheets and Bars with Certification

These sheets and bars come with a traceable lot number and test report.

High-Strength Grade 5
Titanium Rods with Certification

All of these rods come with a traceable lot number and test report.

High-Strength Grade 5
Titanium Rods and Discs

High-Strength Grade
5 Titanium Hex Bars

Ultra-Corrosion-Resistant Grade
2 Titanium Bars with Certification

All of these bars come with a traceable lot number and test report.

Ultra-Corrosion-Resistant Grade
2 Titanium Sheets and Bars

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

Ultra-Corrosion-Resistant Grade
2 Titanium Rods with Certification

All of these rods come with a traceable lot number and test report.

Ultra-Corrosion-Resistant
Grade 2 Titanium Rods

Easy-to-Weld Grade 9 Titanium

Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.

Ultra-Hard C2 Tungsten Carbide

Ultra-Hard C2 Tungsten Carbide Bars

These bars are also known as flat stock.

Ultra-Hard C2 Tungsten Carbide Rods

Ultra-Hard C2 Tungsten
Carbide Notched Rods

Molybdenum Foil

Thin and easy-to-cut, this 99.95% pure molybdenum foil handles high melting points and conducts heat and electricity, making it good for coating heating elements and electronics.

Multipurpose Low-Carbon Steel

Low-Carbon Steel Sheets and Bars

Low-Carbon Steel Barswith Rounded Edges

Tight-ToleranceLow-Carbon Steel Bars

Zinc-Galvanized Low-CarbonSteel Sheets and Bars

High-Temperature AluminizedLow-Carbon Steel Sheets

Nickel-Coated Low-Carbon Steel Bars

Mold- and Mildew-ResistantLow-Carbon Steel Sheets

Paintable GalvannealedLow-Carbon Steel Sheets

Low-Carbon Steel Rods and Discs

Tight-ToleranceLow-Carbon Steel Rods

Zinc-GalvanizedLow-Carbon Steel Rods

Chrome-PlatedLow-Carbon Steel Rods

Low-Carbon Steel Rectangular Tubes

Low-Carbon Steel U-Channels

Low-Carbon Steel Round Tubes

Low-Carbon Steel T-Bars

Low-Carbon Steel Hex Bars

Zinc-Galvanized Low-CarbonSteel 90° Angles

Low-Carbon Steel 90° Angles

Low-Carbon Steel Half-Ovals

Low-Carbon Steel Half-Rounds

Zinc-Galvanized Steel Wire

Low-Carbon Steel Wire

PVC-Coated Steel Wire

Easy-to-Machine Carbon Steel

Easy-to-Machine 1215Carbon Steel Bars

Easy-to-Machine 1215Carbon Steel Rods

Tight-Tolerance Easy-to-Machine1215 Carbon Steel Rods

Easy-to-Machine 1215Carbon Steel Hex Bars

Ultra-Machinable 12L14Carbon Steel Bars

Ultra-Machinable 12L14Carbon Steel Hex Bars

Ultra-Machinable 12L14Carbon Steel Rods

Tight-Tolerance Ultra-Machinable12L14 Carbon Steel Rods

Easy-to-Machine 1117 Carbon Steel

High-Strength Easy-to-Machine1144 Carbon Steel Rods

Tight-Tolerance High-StrengthEasy-to-Machine 1144 Carbon Steel Rods

Ultra-Strength Easy-to-Machine1144 Carbon Steel Rods

High-Strength 1045 Carbon Steel

High-Strength 1045 Carbon Steel Bars

High-Strength 1045 CarbonSteel Rods and Discs

Impact-Resistant A516 Carbon Steel

Impact-Resistant A516 Carbon Steel

Ultra-Wear-Resistant AR500 Carbon Steel

Ultra-Wear-ResistantAR500 Carbon Steel

Wear-Resistant AR400 Carbon Steel

Wear-Resistant AR400 Carbon Steel

Ultra-Strength Carbon Steel

Ultra-Strength Carbon Steel(AHSS) Round Tubes

Ultra-Strength CarbonSteel (UHSS) Sheets

Alloy Steel

Tight-Tolerance HardenedMultipurpose 4140 Alloy Steel Sheets and Bars

Oversized Hardened Multipurpose4140 Alloy Steel Bars

Hardened Multipurpose4140 Alloy Steel Bars

Multipurpose 4140 Alloy Steel Bars

Oversized Multipurpose4140 Alloy Steel Sheets

Multipurpose 4140 AlloySteel Rods and Discs

Chrome-Plated HardenedMultipurpose 4140 Alloy Steel Rods

Hardened Multipurpose4140 Alloy Steel Rods

Tight-Tolerance Multipurpose4140 Alloy Steel Rods

High-Strength Multipurpose4140 Alloy Steel Rods

Hardened Multipurpose4140 Alloy Steel Hex Bars

Multipurpose 4140 Alloy Steel Tubes

Multipurpose 4140Alloy Steel Hex Bars

Easy-to-Weld 4130 AlloySteel Rectangular Tubes

Easy-to-Weld 4130 Alloy SteelRound Tubes with Certification

Easy-to-Weld 4130 AlloySteel Sheets and Bars

Easy-to-Weld 4130 Alloy Steel Rods

Easy-to-Weld 4130Alloy Steel Round Tubes

Easy-to-Weld A572 AlloySteel Sheets and Bars

Hardened High-StrengthA514 Alloy Steel

Fatigue-Resistant High-Strength300M Alloy Steel Rods

High-Strength 4340 Alloy Steel Rods

Wear-Resistant 4150 Alloy Steel

Fatigue-Resistant 9310 Alloy Steel

Easy-to-Machine 41L40 Alloy Steel

Corrosion-Resistant A588 Alloy Steel

Easy-to-Weld Wear-Resistant8620 Alloy Steel

Hard Wear-Resistant52100 Alloy Steel Rods

High-Strength C300 Alloy Steel

Low-Carbon Steel Bars
with Rounded Edges

Tight-Tolerance
Low-Carbon Steel Bars

Zinc-Galvanized Low-Carbon
Steel Sheets and Bars

High-Temperature Aluminized
Low-Carbon Steel Sheets

Mold- and Mildew-Resistant
Low-Carbon Steel Sheets

Paintable Galvannealed
Low-Carbon Steel Sheets

Tight-Tolerance
Low-Carbon Steel Rods

Zinc-Galvanized
Low-Carbon Steel Rods

Chrome-Plated
Low-Carbon Steel Rods

Zinc-Galvanized Low-Carbon
Steel 90° Angles

Easy-to-Machine 1215
Carbon Steel Bars

Easy-to-Machine 1215
Carbon Steel Rods

Tight-Tolerance Easy-to-Machine
1215 Carbon Steel Rods

Easy-to-Machine 1215
Carbon Steel Hex Bars

Ultra-Machinable 12L14
Carbon Steel Bars

Ultra-Machinable 12L14
Carbon Steel Hex Bars

Ultra-Machinable 12L14
Carbon Steel Rods

Tight-Tolerance Ultra-Machinable
12L14 Carbon Steel Rods

High-Strength Easy-to-Machine
1144 Carbon Steel Rods

Tight-Tolerance High-Strength
Easy-to-Machine 1144
Carbon Steel Rods

Ultra-Strength Easy-to-Machine
1144 Carbon Steel Rods

High-Strength 1045 Carbon
Steel Rods and Discs

Ultra-Wear-Resistant
AR500 Carbon Steel

Ultra-Strength Carbon Steel
(AHSS) Round Tubes

Ultra-Strength Carbon
Steel (UHSS) Sheets

Tight-Tolerance Hardened
Multipurpose 4140 Alloy
Steel Sheets and Bars

Oversized Hardened Multipurpose
4140 Alloy Steel Bars

Hardened Multipurpose
4140 Alloy Steel Bars

Oversized Multipurpose
4140 Alloy Steel Sheets

Multipurpose 4140 Alloy
Steel Rods and Discs

Chrome-Plated Hardened
Multipurpose 4140 Alloy Steel Rods

Hardened Multipurpose
4140 Alloy Steel Rods

Tight-Tolerance Multipurpose
4140 Alloy Steel Rods

High-Strength Multipurpose
4140 Alloy Steel Rods

Hardened Multipurpose
4140 Alloy Steel Hex Bars

Multipurpose 4140
Alloy Steel Hex Bars

Easy-to-Weld 4130 Alloy
Steel Rectangular Tubes

Easy-to-Weld 4130 Alloy Steel
Round Tubes with Certification

Easy-to-Weld 4130 Alloy
Steel Sheets and Bars

Easy-to-Weld 4130
Alloy Steel Round Tubes

Easy-to-Weld A572 Alloy
Steel Sheets and Bars

Hardened High-Strength
A514 Alloy Steel

Fatigue-Resistant High-Strength
300M Alloy Steel Rods

Easy-to-Weld Wear-Resistant
8620 Alloy Steel

Hard Wear-Resistant
52100 Alloy Steel Rods

Wear-Resistant 1095 Spring
Steel Sheets and Strips

Easy-to-Form Wear-Resistant 1095
Spring Steel Sheets with Certification

Easy-to-Form Wear-Resistant
1095 Spring Steel Sheets

Easy-to-Form 1075
Spring Steel Sheets

Easy-to-Form 1075 Spring
Steel Sheets with Certification

Lubricated 1065 Spring
Steel Wire Assortments

Impact-Resistant Ductile
Cast Iron Rods and Discs

Oversized Easy-to-Machine
Gray Cast Iron Rods and Discs

Oversized Tight-Tolerance
Easy-to-Machine Gray Cast Iron Rods

Easy-to-Machine Gray
Cast Iron Sheets and Bars

Impact-Resistant
Ductile Cast Iron Bars

Easy-to-Machine
Gray Cast Iron Tubes

Multipurpose 6061
Aluminum Sheets and Bars

Tight-Tolerance Multipurpose
6061 Aluminum Sheets and Bars

Multipurpose 6061 Aluminum
Sheets and Bars with Certification

Polished Multipurpose 6061
Aluminum Sheets and Bars

Anodized Multipurpose 6061
Aluminum Sheets and Bars

Oversized Multipurpose
6061 Aluminum Sheets

Multipurpose 6061
Aluminum Rods and Discs

Multipurpose 6061 Aluminum
Rods with Certification

Tight-Tolerance Multipurpose
6061 Aluminum Rods and Discs

Anodized Multipurpose
6061 Aluminum Rods

Polished Multipurpose
6061 Aluminum Rods

Chrome-Plated Multipurpose
6061 Aluminum Rods

Multipurpose 6061
Aluminum Hex Bars

Anodized Multipurpose
6061 Aluminum Hex Bars

Multipurpose 6061
Aluminum U-Channels

Multipurpose 6061 Aluminum
Rectangular Tubes

Multipurpose 6061
Aluminum Round Tubes

Anodized Multipurpose 6061
Aluminum Round Tubes

Polished Multipurpose 6061
Aluminum Round Tubes

Multipurpose 6061
Aluminum Half-Round Bars

Multipurpose 6061
Aluminum Hex Tubes

Polished Multipurpose
6061 Aluminum 90° Angles

Anodized Multipurpose
6061 Aluminum 90° Angles