Metal Cable | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	For Use With For Use With

Cardboard

Stranded
Bare Wire
and Cable

Wire Rope

	Wire Rope Material Wire Rope Material

Steel

Stainless Steel

View catalog pages (111)

Forward

How can we improve?

6,524 Products

Multipurpose Cable

Cable

Use this general purpose cable to supply power to equipment.

Coiled Cable

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

Stretchable Cable

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

High-Temperature Cable

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Abrasion-Resistant Cable

A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.

Corrosion-Resistant Cable

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

Armored Corrosion-Resistant Cable

A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.

Flat Corrosion-Resistant Cable

At 0.22" thick, this flat cable has a low profile to fit in tight spaces. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.

Low-Voltage Cable

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

Miniature Cable

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.

High-Voltage Cable

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

Direct-Burial Cable

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Drop-Down Cable

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Appliance Cable

Also known as zip cord, this cable is often used in lamps, heat guns, and other small appliances.

Automation Cable

Continuous-Flex Cable

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Oil-Resistant Continuous-Flex Cable

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

No-Conduit-Required Continuous-Flex Cable

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

High-Voltage Continuous-Flex Flat Cable

Rated to 17,000 volts AC or higher, this cable is often used in oil drilling, robotics, and festoon systems. It withstands continuous motion without degrading data or signal transmission. The flat shape allows it to fit in tight spaces.

Continuous-Flex and -Twist Robotics Cable

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Servomotor Continuous-Flex Cable

Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.

Long-Life Continuous-Flex Cable

With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.

Space-Saver Continuous-Flex Cable

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.

Control Cable

Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.

No-Conduit-Required Control Cable

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Motor Cable

Also known as VFD motor cable, this cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.

Space-Saver Control Cable

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Flat Control Cable

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Water-Block Control Cable

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

Ribbon Cable

Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.

Data, Audio, and Video Cable

Ethernet Cable

Send data between computers, servers, and switches in an office or workstation.

Continuous-Flex Ethernet Cable

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Duct-Rated Ethernet Cable

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Oil-Resistant Ethernet Cable

Transmit data in rough industrial applications. This cable has an oil-resistant insulation.

Duct-Rated Oil-Resistant Ethernet Cable

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Continuous-Flex Data Communication Cable

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

Data Communication Cable

Use this cable for complex and high-speed data and signal transmission.

Twisted-Pair Data Communication Cable

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Industrial Communication-Standard Cable

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

Coaxial Cable

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Duct-Rated Coaxial Cable

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

Telephone Cable

Connect telephones and telephone blocks to a wall jack.

Audio Cable

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Building Cable

Armored Building Cable

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Building Cable

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

Armored Building Cable with Uninsulated Ground Wire

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC and BX cable.

Armored Building Cable with Fittings

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

Riser-Rated Communication and Security System Cable

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Communication and Security System Cable

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

Duct-Rated Communication and Security System Cable

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

Coiled Communication Cable

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.

Thermostat Cable

Hook up thermostats, air-conditioning units, and other low-voltage equipment.

Duct-Rated Fire Alarm Cable

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.

Riser-Rated Fire Alarm Cable

This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.

Welding Cable

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Flame-Resistant Welding Cable

Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.

Wire

Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.

Mil. Spec. Wire

This wire meets stringent military specifications for material quality.

Wire Assortments

Keep spools of wire in multiple colors on hand.

Mil. Spec. Wire Assortments

Maintain a supply of Mil. Spec. wire in multiple colors.

Machine Tool Wire

More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.

Abrasion-Resistant Wire

A durable insulation withstands abrasion, so this wire can be pulled over rough surfaces.

Chemical-Resistant Wire

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

Radiation-Resistant Wire

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

High-Temperature Wire

Use this wire in ovens, furnaces, and other electrical heating equipment where temperatures reach 480° F and higher.

Low-Voltage High-Temperature Wire

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

Ultra-High-Voltage Wire

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

High-Voltage Wire

Often used in mining applications, treatment plants, and motors, this wire withstands 5,000 volts AC/DC.

Space-Saver Wire

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

Tangle-Free Wire

Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.

Stretchable Wire

When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Shielded Stretchable Wire

The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Battery Wire

Connect batteries in vehicles and generators.

Vehicle Wire

Also known as primary wire, this wire meets SAE standards for low-voltage wiring in trucks, boats, trailers, and other vehicles.

Vehicle Wire Assortments

Keep spools of vehicle wire in multiple colors on hand.

Long-Life Continuous-Flex Wire

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

High-Voltage Continuous-Flex Wire

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

Continuous-Flex Wire

Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.

Chemical-Resistant Continuous-Flex Wire

The TPE insulation on this wire resists most chemicals, including oil and coolant, and withstands continuous motion.

Building Wire

Install this wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.

Outdoor Wire

Protected by an insulation that resists UV light and water, this wire is often used outdoors for lighting and generators.

High-Voltage Outdoor Wire

Also known as photovoltaic (PV) wire, this wire is often used in solar panels and resists damage from UV light. It withstands 2,000 volts AC/DC.

Circuit Board Wire Assortments

Assortments include wire in multiple lengths and colors.

Circuit Board Wire

Make connections in circuit boards with these short lengths of terminated wire.

Wire Wrap

This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering.

Motor Winding Wire

Also known as magnet wire, this wire is commonly used in motors, transformers, relays, and other high-speed winding applications.

Outlet Strips

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

Outlet Strips with Individual Outlet Switches

Separately control each device plugged into these strips—each outlet has its own power switch.

Outlet Strips with Remote Switch

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

GFCI Outlet Strips

Keep personnel safe from electric shock with ground fault protection.

Interference-Limiting Outlet Strips

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Sure-Grip Outlet Strips

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Wall-Mount Outlet Strips

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Rack-Mount Outlet Strips

Mount these strips into standard 19" wide electronics racks and enclosures.

Flush-Mount Outlet Strips

Install these outlet strips in an opening in workbenches, tables, and other furnishings; the outlets lie flush with the surface for a seamless appearance.

Cabinet-Mount Outlet Strips

Install these extra-long strips onto the frame of an electrical cabinet.

Ring Terminal Jumper Cords

Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.

Wire Rope—Not for Lifting

Corrosion-Resistant Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Difficult-to-Bend Corrosion-Resistant
Wire Rope—Not for Lifting

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

Extra-Flexible Coated Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Extra-Flexible Coated Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Coated Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Weather-Resistant Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Weather-Resistant
Coated Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Wire Rope—Not for Lifting

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

Extra-Flexible Low-Stretch Coated
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Low-Stretch Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Chemical-Resistant Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Nonmagnetic Stainless
Steel Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Nonmagnetic Stainless Steel Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Nonsparking Corrosion-Resistant
Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Nonsparking
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Extra-Flexible Ultra-Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Ultra-Corrosion-Resistant Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Small-Diameter Braided Wire—Not for Lifting

Difficult-to-Bend Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Extra-Flexible Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Coated Small-Diameter
Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Coated Small-Diameter Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Coated Small-Diameter
Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Small-Diameter Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Small-Diameter
Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Extra-Flexible Low-Stretch Coated
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Low-Stretch Coated Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Chemical-Resistant Coated Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Chemical-Resistant Coated
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

Ultra-Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

The superior corrosion resistance of nickel-copper makes this braided wire best for use with salt water and acidic- and alkaline-based solutions.

Nonsparking Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

Not only is this phosphor bronze braided wire corrosion resistant, it inhibits sparking.

Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Ultra-Flexible Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Ultra-Flexible Corrosion-Resistant
Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Corrosion-Resistant Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Rotation- and Corrosion-Resistant
Wire Rope—For Lifting

Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.

Ultra-Flexible High-Strength Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

High-Strength Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Rotation-Resistant Wire Rope—For Lifting

To counteract rotation while under load, the outer strands are wound in the opposite direction of the core.

Wear-Resistant Wire Rope—For Lifting

Flattened outer strands create a smooth surface area that spreads contact to reduce wear.

Wire Rope Loop Fittings

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Crosby Forged Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.

Forged One-Piece Wire Rope Clamps—Not for Lifting

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Crosby Forged Double-Saddle
Wire Rope Clamps—Not for Lifting

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Easy-Install Wire Rope Clamps—Not for Lifting

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Quick-Adjust Wire Rope Clamps—Not for Lifting

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Wire Rope Clamps with Thimbles—Not for Lifting

A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.

Wire Rope Compression Sleeves—For Lifting

These compression sleeves are designed to meet lifting specifications.

Wire Rope Compression Sleeves—Not for Lifting

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Light Duty Wire Rope Thimbles—Not for Lifting

These thimbles are also known as thin pattern thimbles.

Heavy Duty Wire Rope Thimbles—For Lifting

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

Medium Duty Wire Rope Thimbles—Not for Lifting

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Open-End Light Duty Wire
Rope Thimbles—Not for Lifting

The open-end design leaves more room for connections than other thimbles.

Closed-End Light Duty Wire
Rope Thimbles—Not for Lifting

Smooth rounded edges and an endless design prevent snags.

Plug-Lock Wire Rope End Fittings—For Lifting

Stud-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Clevis-End Plug-Lock Wire
Rope End Fittings—For Lifting

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Eye-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Swivel-Hook-End Plug-Lock Wire
Rope End Fittings—For Lifting

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Plugs for Plug-Lock Wire Rope End Fittings—For Lifting

Use a new plug when installing a fitting on a different rope.

Sleeve-Grip Wire Rope End Fittings—Not for Lifting

Mounting-Plate-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Stud-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Eye-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Clevis-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Roller Swage Wire Rope End Fittings—Not for Lifting

Ball-with-Shank-End Roller Swage
Wire Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Stud-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Eye-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Clevis-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Compression-Grip Wire Rope End Fittings—Not for Lifting

Stud-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Mounting-Plate-End Compression-Grip
Wire Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Clevis-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty clevis-end fittings. They are also known as hand swage fittings.

Eye-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Feed-Through Wire Rope End Fittings—Not for Lifting

Hook-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these hook-end fittings and through the body for a quick and simple installation.

Clevis-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Eye-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Wedge-Lock Wire Rope End Fittings—For Lifting

Also known as open wedge sockets, these end fittings require only a torque wrench to install.

Wire Rope Stops—Not for Lifting

Wire Rope Lanyards—Not for Lifting

Eye-to-Eye Lanyards—Not for Lifting

Loop-to-Loop Lanyards—Not for Lifting

Create-Your-Own Lanyards—Not for Lifting

Loop-to-Eye Lanyards—Not for Lifting

Reinforced Loop-to-Loop Lanyards—Not for Lifting

A thimble on the inside of the loop protects the wire rope from fraying.

Loop-to-Tab Lanyards—Not for Lifting

Adjustable-Loop-to-Hook Lanyards—Not for Lifting

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Ball with Shank-to-Plain-End Lanyards—Not for Lifting

Mil. Spec. Eye-to-Stud Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Carabiner-to-Carabiner Lanyards—Not for Lifting

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Eye-to-Tab Lanyards—Not for Lifting

Brackets for Ball with Shank End Fittings

Secure a ball with shank to a flat surface.

Eye-to-Ball with Shank Lanyards—Not for Lifting

Adjustable-Loop-to-Stud Lanyards—Not for Lifting

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Eye-to-90°-Eye Lanyards—Not for Lifting

Mil. Spec. Eye-to-Ball with
Shank Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20664 and MS 20668.

Adjustable-Loop-to-90° Eye Lanyards—Not for Lifting

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Loop-to-90°-Eye Lanyards—Not for Lifting

Mil. Spec. Eye-to-Eye Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.

Adjustable-Loop-to-Twin-Hook Lanyards—Not for Lifting

Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.

Eye-to-Swivel-Fork Lanyards—Not for Lifting

The swivel fork allows the lanyard to rotate freely.

Retractable Wire Rope Lanyards—Not for Lifting

Eye-to-Eye Retractable Lanyards—Not for Lifting

Loop-to-Loop Retractable Lanyards—Not for Lifting

Swivel-Fork-to-Swivel-Fork
Retractable Lanyards—Not for Lifting

The swivel fork ends allow the lanyard to rotate freely.

Loop-to-Tab Retractable Lanyards—Not for Lifting

Loop-to-Eye Retractable Lanyards—Not for Lifting

Wire Rope with Fitting—For Lifting

Steel Wire Rope with Reinforced Loop—For Lifting

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.

18-8 Stainless Steel Wire Rope
with Reinforced Loop—For Lifting

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Galvanized Steel Wire Rope with
Reinforced Loop—For Lifting

The galvanized finish resists corrosion.

Galvanized Steel Wire Rope with Hook—For Lifting

The galvanized finish resists corrosion.

18-8 Stainless Steel Wire Rope with Hook—For Lifting

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Steel Wire Rope with Hook—For Lifting

This steel wire rope includes a hook with latch on one end for use with winches.

Wire Rope with Stop—For Lifting

A stop, also known as a ferrule fitting, installed on one end holds the rope in place.

Wire Rope with Swivel Hook—For Lifting

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Shackles—For Lifting

Screw-Pin Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Safety-Pin Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw-Pin Chain Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Safety-Pin Chain Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Safety-Pin Shackles with Two Connectors—For Lifting

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Flush-Pin Shackles with Two Connectors—For Lifting

The pins have flush ends to prevent snagging and accidental disengagement.

Heavy Duty Shackles—For Lifting

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

Screw-Pin Web Sling Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Safety-Pin Web Sling Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Shackles—Not for Lifting

Screw-Pin Shackles—Not for Lifting

For use in low-vibration applications where the shackle remains stationary.

Captive Locking Screw-Pin Shackles—Not for Lifting

A lip on the shackle keeps the screw from falling out when loosened.

Screw-Pin Elongated Shackles—Not for Lifting

For use in low-vibration applications where the shackle remains stationary.

Captive Locking Screw-Pin
Elongated Shackles—Not for Lifting

A lip on the shackle keeps the pin from falling out when loosened.

Locking Screw-Pin Elongated Shackles—Not for Lifting

Indentations in the shackle body hold the head of the pin in place once fastened.

Cotter Pin Shackles with Two Connectors and
Small and Large Openings—Not for Lifting

Cotter Pin Shackles with Two Connectors
and Same-Size Openings—Not for Lifting

Locking Screw-Pin Chain Shackles—Not for Lifting

Indentations in the shackle body hold the head of the pin in place once fastened.

Captive Locking Screw-Pin
Chain Shackles—Not for Lifting

A lip on the shackle keeps the pin from falling out when loosened.

90° Twist Shackles—Not for Lifting

Minimize twisting and knotting of rope and chain.

Quick-Release Shackles—Not for Lifting

Light Duty Collar-Release Shackles—Not for Lifting

Pull the collar to release the shackle from its locked position.

Pin-Release Clevis Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Pin-Release Eye Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Lever-Release Shackles—Not for Lifting

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Links and Rings—For Lifting

Oblong Links—For Lifting

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Pear-Shaped Links—For Lifting

The narrow end that restricts the movement of the rope and chain and a wide end that allows room to attach multiple connectors.

Oblong Link Assemblies—For Lifting

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Rings—For Lifting

Removable Figure-Eight Connecting Links—For Lifting

Also known as hammer locks, assemble by hammering a pin through the center.

Nonremovable Figure-Eight
Connecting Links—For Lifting

For security, these connectors must be cut off to be removed.

Removable Pear-Shaped Connecting Links—For Lifting

The pear-shaped link provides more room for attachments than standard figure-eight connectors.

Wire Rope and Chain Sling Identification Tags

Commonly used in conjunction with connecting links to meet OSHA 29 CFR 1910.184.

Links with Chain-Shortening Hooks—For Lifting

A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.

Links and Rings—Not for Lifting

Oval-Shaped Threaded
Connecting Links—Not for Lifting

Also known as quick links, screw the nut onto the threaded end to attach end fittings.

Pear-Shaped Threaded
Connecting Links—Not for Lifting

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Square-Shaped Threaded
Connecting Links—Not for Lifting

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Triangle-Shaped Threaded
Connecting Links—Not for Lifting

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Medium Duty Bend-Close
Connecting Links—Not for Lifting

Drive the end through the eye and weld or flatten the extended end to resist opening. These links are also known as cold shuts.

Light Duty Bend-Close Connecting Links—Not for Lifting

Also known as lap links or repair links.

Hammer-Close Connecting Links—Not for Lifting

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Twist-Close Connecting Links—Not for Lifting

Often used to create wire rope barriers, these connecting links close under tension and open under slack.

D-Rings—Not for Lifting

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Rings—Not for Lifting

Oblong Links—Not for Lifting

Pear-Shaped Links—Not for Lifting

The narrow end that restricts the movement of the rope and chain and a wide end that allows room to attach multiple connectors.

Hooks—For Lifting

Clevis Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Oversized Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Oversized Eye Hooks with Swivel—For Lifting

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks with Swivel—For Lifting

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Half-Link Hooks—For Lifting

These have a removable half-link to attach large rings, links, and other closed fittings.

Eye Hooks with Load-Locking Latch—For Lifting

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

Clevis Hooks with Load-Locking
Latch and Swivel—For Lifting

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

Eye Hooks with Load-Locking
Latch and Swivel—For Lifting

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

Clevis Hooks with Load-Locking Latch—For Lifting

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

Threaded-Stud Hooks with
Spring-Close Locking Latch—For Lifting

Screw these hooks into place and secure with the included nut.

Clevis Hooks with Spring-Close
Locking Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Clevis Hooks with Spring-Close Locking
Latch and Ball-Bearing Swivel—For Lifting

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

Eye Hooks with Spring-Close Locking
Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Narrow Body Eye Hooks—For Lifting

Insert in eyes, links, rings, and other connectors with small openings. Also known as J-hooks.

Grab Hooks with Eye—For Lifting

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

Grab Hooks with Clevis—For Lifting

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

Grab Hooks with Eye and Securing Pin—For Lifting

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

Wide Mouth Clevis Hooks—For Lifting

Also known as foundry hooks, use these on thick molds, castings, and objects that don't have attachment points.

Wide Mouth Eye Hooks—For Lifting

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Hooks—Not for Lifting

Swivel Eye Hooks—Not for Lifting

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks—Not for Lifting

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Weld-On Hooks—Not for Lifting

Weld these hooks into place.

Slip Hooks with Eye—Not for Lifting

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Slip Hooks with Unthreaded Shank—Not for Lifting

Cut your own threads or weld the shank in place.

Slip Hooks with Clevis—Not for Lifting

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Grab Hooks with Eye—Not for Lifting

Often used in binding and tie-down applications, these securely hold a single link of chain.

Spring Latch Kits for Hooks with Pinhole—For Lifting

These kits fit most hooks with a drilled pinhole.

Spring Safety Latch Kits for
Hooks with Pinhole—For Lifting

Prevent accidental release and keep the tip from snagging.

Carabiners

Carabiners—Not for Lifting

Screw-Locking Carabiners—Not for Lifting

Lock by screwing the latch into the body.

Twist-Locking Carabiners—Not for Lifting

To open, lift and twist the latch 90°.

Slide-Release Carabiners—Not for Lifting

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Swivels for Rope and Chain

Eye-to-Eye Ball Bearing Swivels—Not for Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Split Ring-to-Split Ring Miniature
Ball Bearing Swivels—Not for Lifting

These have split rings that swing freely and pull from the center for easy alignment.

Split Ring-to-Snap Miniature Ball
Bearing Swivels—Not for Lifting

The snap and split ring swing freely and pull from the center for easy alignment.

Eye-to-Clevis Ball Bearing Swivels—Not for Lifting

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Clevis-to-Clevis Ball Bearing Swivels—Not for Lifting

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Clevis-to-Clevis Swivels—Not for Lifting

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Eye-to-Eye Swivels—Not for Lifting

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Eye-to-Clevis Swivels—Not for Lifting

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Clevis-to-Clevis Ball Bearing Swivels—For Lifting

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Eye-to-Eye Ball Bearing Swivels—For Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Eye-to-Clevis Ball Bearing Swivels—For Lifting

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Snaps

Snaps with Eye

Create fast connections with items, such as rope, chain, and straps.

Snaps with Swivel Eye

These snaps have an eye that rotates for easy positioning.