A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

When used with high-pressure compression fittings and nuts, these sleeves bite into stainless steel tubing to form a strong seal.

Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing.

Use with soft plastic tubing to prevent the tube from collapsing.

Transfer liquids and gases into high-vacuum chambers with these assembled fittings, also known as feedthroughs. Their quick-clamp (ISO-KF) connections are easier to install and remove than bolt-on flanges.

Bolt these fittings onto your ultra-high-vacuum chamber to transfer liquids and gases inside. Also known as feedthroughs, they come assembled with a flanged (CF) fitting, metal tubing, and two Yor-Lok tube fittings.

Create a strong connection without heating, flaring, or soldering.

Use these sleeves with compression nuts and fittings to create a strong seal on copper tubing.

Use these nuts with compression sleeves and fittings to create a strong seal on copper tubing.

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Use these sleeves with compression nuts and fittings, sometimes called bite fittings, to create a strong seal on steel tubing. They are also known as ferrules.

Pair these nuts with compression sleeves and high-pressure fittings. They withstand about twice as much pressure as nuts for standard compression fittings, so they’re good for hydraulic power applications.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Safe for use in your air brake line, these fittings meet Department of Transportation FMVSS 571 standards. They’ve been tested for thermal cycling, vibration, and burst pressure, so put them to work right away.

Use these to replace a damaged sleeve (ferrule) in quick-assembly compression nuts.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Lighter in weight than their metal counterparts, these quick-disconnect couplings are made of acetal plastic. They are moisture resistant, so they won’t absorb water and lose strength, even in high-humidity environments.

Not only are these chrome-plated brass couplings corrosion resistant, they’re also durable enough to handle pressures up to 250 psi and can be used with vacuum.

Use these nuts and sleeves with compression fittings for food and beverage to create a seal on plastic tubing.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

Use in medium-pressure applications up to 230 psi.

To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications.

This steel pipe has grooved ends that connect to fittings with a clamp (sold separately) for an easy way to install piping systems.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.