A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

Tighten these nuts onto high-pressure compression sleeves and fittings to create a strong seal on stainless steel tubing.

Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing.

For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

Originally used on satellites, rocket propulsion systems, and even Mars rovers, these fittings will handle your most challenging industrial environments. They're designed to withstand high vibration and ultra-high vacuum without generating particles that could disrupt your operation.

Transfer liquids and gases into high-vacuum chambers with these assembled fittings, also known as feedthroughs. Their quick-clamp (ISO-KF) connections are easier to install and remove than bolt-on flanges.

Create a strong connection without heating, flaring, or soldering.

Use these nuts with compression sleeves and fittings to create a strong seal on copper tubing.

Create a strong seal on copper tubing when you couple these nuts with compression sleeves and fittings.

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal.

Use these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on copper tubing.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Use these nuts with compression sleeves and fittings, also known as bite fittings, to create a strong seal on steel tubing.

Pair these nuts with compression sleeves and high-pressure fittings. They withstand about twice as much pressure as nuts for standard compression fittings, so they’re good for hydraulic power applications.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Use these to replace a damaged sleeve (ferrule) in quick-assembly compression nuts.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Lighter in weight than their metal counterparts, these quick-disconnect couplings are made of acetal plastic. They are moisture resistant, so they won’t absorb water and lose strength, even in high-humidity environments.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.

Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.