S-shaped handles keep your hand clear of material, so you can cut flush against flat surfaces.

Prevent snags and injury with the rounded points on these small scissors.

Trim flush against a flat surface with the curved blades on these small scissors.

For extra leverage to cut through Kevlar, metal, and plastics, these scissors have long handles and short blades.

Also known as electricians' shears, the back edge of the blade has a file to clean contacts.

Protect sensitive equipment from harmful static discharges while cutting and stripping wire.

Also known as bulldog snips, these have long handles and short blades for cutting through thick sheet metal with less effort than standard sheet metal cutters.

Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.

The unique shape of these cutters gives you 40% more power per cut than standard sheet metal cutters. When blades get dull, loosen a few screws to replace them.

Made from aluminum bronze, the blade and handle on these cutters inhibit sparking and are FM approved. Use them for straight cuts.

Keep your hand away from the material being cut.

Blades are high-speed steel so they stay sharp longer than steel blades, and they can be sharpened.

Make straight and curved cuts in sheet metal—these sets come with three tools for different cutting patterns. Also called aviation snips, they have a double hinge, so they cut with more force and require less effort to squeeze the handles than standard sheet metal cutters.

Prevent waste from flying up as you work. A double blade makes two cuts to create a 7/64"-wide step that peels back, leaving little distortion and smooth edges.

Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.