We will reply to your message within an hour.
House electrical components in these general purpose enclosures.
Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.
These enclosures have internal slots to hold circuit boards in place.
With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
Holes in the cover allow easy installation of push buttons, switches, and indicating lights.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.
Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.
With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.
Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
Inspect components without opening the cover.
Control access to these enclosures with a key-operated lock.
No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.
With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.
Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.
Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.
These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Snap these enclosures onto 35 mm DIN rail and lock them in place.
These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.
Protect monitors and televisions from environmental damage with these enclosures.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
Rated NEMA 12 for protection from dirt and oil/coolant dripping.
These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.
House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.
These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.
Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.
Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.
These kits come with everything you need to mount enclosures to round poles or beams. They clamp on to a range of pole diameters to hold enclosures securely in place.
Easily access HMI devices, push-buttons, and other electronics mounted on the exterior of an enclosure while keeping contents safe from water, oil, dust, and weather.
Monitor HMI covers make it easy to access HMI devices, push-buttons, and other electronics mounted on the exterior of an enclosure through a clear window without opening the cover.
Add a secondary panel that swings to mount more components in your enclosure.
Mount enclosures to the floor above hazards such as water.
Customize component placement without drilling leaky holes—these channels screw into the mounting bosses in your enclosure.
With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.
Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.
This raceway system is also known as wireway and wire trough.
Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.
In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.
Route power, data, and control cable rated up to 600 volts AC/DC.
Due to the welded-wire construction these panels require fewer nuts and bolts, and won’t unravel if you need to cut around a pipe or other obstruction.
Create secure but visible tool and stock rooms.
These complete partitions include everything you'll need.
The top compartment has a window that shields the monitor while providing a clear view of the screen.
With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments.
These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.
Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.
Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.
Combine posts, panels, and doors to create a barrier around equipment.
Protect workers from falls when transferring pallets to elevated work areas.
Protect personnel and equipment from debris with these portable panels.
Safely handle hazardous and sensitive material in an enclosed space that keeps out air and moisture.
Pound fence posts into the ground.
With a long handle for leverage, these pullers extract fence posts from the ground.
Secure and hold up fencing with these posts.
Stand panels up to create enclosures without sinking posts into the ground.
Made of finely knit corrosion-resistant mesh, this highly pliable fencing is often used to secure insulation blankets, covers, and jackets.
Also known as chicken wire and poultry netting, this fencing is a flexible alternative to metal welded-wire fencing.
With wire strands welded at each intersection, this fencing has a strong, rigid construction.
These guards are steel.
If none of our standard guards fit your chain or belt system, we'll create one to suit your needs. Guards are steel and fit sprockets up to 48" apart.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.