Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

Seal leaks around small holes.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Make castings and fill voids with these two-part pourable epoxies.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Fill cracks with these coatings to stop leaks and deaden sound.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For invisible bond lines, these adhesives dry clear.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Even on oily surfaces, these retaining compounds keep their hold.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.