Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

An ETP (electrolytic tin plate) laminate covers the vermiculite core to ensure this gasket material maintains its shape as it expands and contracts during heating/cooling cycles. Maximum temperature is 1830° F.

Made from a blend of PTFE and 316 stainless steel, these gaskets hold up to the harsh chemicals, high pressures, and high temperatures used in sanitary processes.

These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.

Use cartridges with a standard caulk gun for quick and easy dispensing.

All the benefits of a gasket maker in a no-drip form.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.

These gasket makers come in a can.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

All the benefits of gasketing adhesive in a no-drip form.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Form rigid seals on plumbing connections and duct.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

Sample multiple sizes and styles of heavy duty plastic trim.

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA 1971 (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose.

The slippery PTFE surface of these seals allows rod motion up to seven times faster than our other rod seals.

Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.

Ribbed Buna-N over steel creates a tight seal with the bore, even when mating with a rough surface or in a split housing.

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Connect wall-mount toilets and urinals to the flush valve. These connectors are also known as spuds.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Make seals that support glass under heavy loads in equipment and buildings.

Seal glass windows in metal and wood fire-rated doors.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

No need to drill mounting holes, this weatherstripping has a peel-and-stick adhesive backing.

The threshold height can be adjusted to ensure a tight fit under a door.

Since it’s thin and easy to cut, as well as highly conductive and corrosion resistant, this 99.99% pure gold foil is often used to plate electrical connectors that are exposed to the air.

99.95% pure, this platinum wire is used for applications that require a soft material that resists corrosion and oxidation and has a high melting point.