Capacity While Moving Capacity While Moving |
|---|
|
Height Height |
|---|
For Use With For Use With |
|---|
|
Capacity When Stationary Capacity When Stationary |
|---|
|
Capacity On Rack Capacity On Rack |
|---|
|
Compatible Racks Compatible Racks |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Pallet Type Pallet Type |
|---|
|
Length Length |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Space Saving Features Space Saving Features |
|---|
|
Steel Pallets for Racks without Decking
Compared to plastic pallets, steel pallets offer the highest load capacities. You can store them directly on the beams of a pallet rack. Unlike nestable pallets, they can be stored in stacks for easy forklift access.
Overall | Capacity, lbs. | Max. Fork | Number of Entry Points for | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pallet Type | Material | Gauge | Wd. | Ht. | Dp. | While Moving | When Stationary | On Rack | Wd. | Ht. | Forklifts | Pallet Jacks | Each | |
For Use With Forklifts and Pallet Jacks | ||||||||||||||
Vented Surface | ||||||||||||||
| Stackable | Steel | 16 | 48" | 4 1/4" | 48" | 4,000 | 40,000 | 4,000 | 9 3/4" | 1 3/4" | 4 | 2 | 000000 | 0000000 |
For Use With Forklifts | ||||||||||||||
Solid Surface | ||||||||||||||
| Stackable | Steel | 12 | 42" | 5" | 48" | 6,000 | 40,000 | 8,000 | 20 3/4" | 3" | 2 | __ | 000000 | 000000 |
Steel Spill-Control Pallets
Made of 12-gauge steel, these pallets are more durable than plastic pallets. They have removable grating for easy cleaning.
Pallets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Usable | Max. Fork | Ramps | ||||||||||||||||
| For No. of 55-Gallon Drums | Cap., gal. | Weight Cap., lbs. | Lg. | Wd. | Ht. | Lg. | Wd. | Color | No. of Entry Points for Forklifts | Wd. | Ht. | Space Saving Features | Each | Weight Cap., lbs. | Each | |||
Powder-Coated Steel—Meets EPA 40 CFR 264.175 | ||||||||||||||||||
| A | 4 | 65 | 6,000 | 51" | 51" | 6 1/2" | 50 1/2" | 49" | Gray | __ | __ | __ | Stackable | 0000000 | 0000000 | 1,500 | 00000000 | 0000000 |
| A | 6 | 100 | 9,000 | 76 1/2" | 51" | 6 1/2" | 74" | 50 1/2" | Gray | __ | __ | __ | Stackable | 0000000 | 00000000 | 1,500 | 00000000 | 000000 |
| B | 2 | 65 | 2,000 | 51" | 26" | 16" | 50 1/2" | 24" | Gray | 4 | 18" | 4" | Stackable | 0000000 | 000000 | __ | 000000 | 00 |
| B | 4 | 65 | 4,000 | 51" | 51" | 10 1/2" | 50 1/2" | 49" | Gray | 4 | 35" | 4" | Stackable | 0000000 | 00000000 | 1,500 | 00000000 | 000000 |
| B | 6 | 95 | 6,000 | 76 1/2" | 51" | 10 1/2" | 74" | 50 1/2" | Gray | 4 | 28" | 4" | Stackable | 0000000 | 00000000 | 1,500 | 00000000 | 000000 |
Powder-Coated Steel | ||||||||||||||||||
| A | 2 | 35 | 3,000 | 51" | 26" | 6 1/2" | 50 1/2" | 24" | Gray | __ | __ | __ | Stackable | 0000000 | 000000 | 1,500 | 00000000 | 000000 |
Spill-Control Trays
Bottom Inside | ||||||||
|---|---|---|---|---|---|---|---|---|
| Capacity | Lg. | Wd. | Ht. | Lg. | Wd. | Space Saving Features | Each | |
Galvanized Steel | ||||||||
| 2 gal. | 25 3/4" | 17 3/4" | 1" | 25 5/8" | 17 5/8" | Nestable | 0000000 | 00000 |
Large-Capacity Containers
Bottom Inside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Wd. | Dp. | Ht. | Wd. | Dp. | Gauge | No. of Entry Points for Forklifts | Max. Fork Height | Space Saving Features | Max. No. of Stackable Units | Each | |
Steel | ||||||||||||
| 4,000 | 36 1/2" | 31 1/2" | 29 1/2" | 35" | 30" | 13 | 4 | 4" | Stackable | 5 | 0000000 | 0000000 |
| 4,000 | 43 1/2" | 43 1/2" | 23 1/2" | 42" | 42" | 13 | 4 | 4" | Stackable | 5 | 0000000 | 000000 |
| 4,000 | 43 1/2" | 43 1/2" | 29 1/2" | 42" | 42" | 13 | 4 | 4" | Stackable | 5 | 0000000 | 000000 |
| 4,000 | 49 1/2" | 49 1/2" | 29 1/2" | 48" | 48" | 13 | 4 | 4" | Stackable | 5 | 0000000 | 000000 |
Collapsible Large-Capacity Containers
Collapse and stack containers when not in use to save valuable storage space.
Bottom Inside | Wire Opening | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Wd. | Dp. | Ht. | Wd. | Dp. | Ht. | Wd. | Gauge | No. of Drop Doors | No. of Entry Points for Forklifts | Max. Fork Ht. | Max. No. of Stackable Units | Each | |
Width-Side Drop-Door Location | ||||||||||||||
| 1,000 | 32" | 20" | 21" | 30" | 18" | 1/2" | 1/2" | 11 | 1 | 4 | 3 7/8" | 3 | 0000000 | 0000000 |
| 1,000 | 32" | 20" | 21" | 30" | 18" | 1 1/8" | 1 1/8" | 11 | 1 | 4 | 3 7/8" | 3 | 0000000 | 000000 |
| 4,000 | 40" | 32" | 34" | 38" | 30" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | 0000000 | 000000 |
| 4,000 | 48" | 40" | 30" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | 0000000 | 000000 |
| 4,000 | 48" | 40" | 36" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | 0000000 | 000000 |
| 4,000 | 48" | 40" | 42" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | 0000000 | 000000 |
Mobile Collapsible Large-Capacity Containers
Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.
Bottom Inside | Wire Opening | Wheel | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., lbs. | Wd. | Dp. | Ht. | Wd. | Dp. | Ht. | Wd. | Gauge | No. of Drop Doors | No. of Entry Points for Forklifts | Max. Fork Ht. | Max. No. of Stackable Units | Caster Type | Dia. | Material | Each | |
Zinc-Plated Steel | |||||||||||||||||
Width-Side Drop-Door Location | |||||||||||||||||
| 1,000 | 32" | 20" | 22" | 30" | 18" | 1/2" | 1/2" | 11 | 1 | 4 | 3 7/8" | 3 | Two Rigid and Two Swivel | 3 1/2" | Phenolic Plastic | 0000000 | 0000000 |
| 1,000 | 32" | 20" | 22" | 30" | 18" | 1 1/8" | 1 1/8" | 11 | 1 | 4 | 3 7/8" | 3 | Two Rigid and Two Swivel | 3 1/2" | Phenolic Plastic | 0000000 | 000000 |
| 2,800 | 40" | 32" | 36" | 38" | 30" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | Two Rigid and Two Swivel | 4" | Phenolic Plastic | 0000000 | 000000 |
| 2,800 | 48" | 40" | 32" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | Two Rigid and Two Swivel | 4" | Phenolic Plastic | 0000000 | 000000 |
| 2,800 | 48" | 40" | 38" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | Two Rigid and Two Swivel | 4" | Phenolic Plastic | 0000000 | 000000 |
| 2,800 | 48" | 40" | 44" | 46" | 38" | 2" | 2" | 3 | 1 | 4 | 3 7/8" | 4 | Two Rigid and Two Swivel | 4" | Phenolic Plastic | 0000000 | 000000 |
Fixturing Tables
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
For technical drawings and 3-D models, click on a part number.
Tables have removable plates that are precision ground to a tight tolerance for accurate positioning. Holes in a grid pattern and slots between the plates support a variety of clamps or workholding setups.
Overall | Slots | Plates | Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Load Capacity, lbs. | No. of | Wd. | Ctr.-to-Ctr. | No. of | Wd. | Thick. | No. per Plate | Dia. | Ctr.-to-Ctr. | Flatness Tolerance | Material | Plate Material | Features | Each | |
| 38" | 22" | 36" | 2,000 | 2 | 1 3/4" | 8" | 3 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 000000000 |
| 47" | 38" | 36" | 5,000 | 5 | 1 3/4" | 8" | 6 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 00000000 |
| 78" | 38" | 36" | 5,500 | 9 | 1 3/4" | 8" | 10 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 00000000 |
| Replacement Plate | 0000000 | Each | 0000000 |
Right-angle brackets hold work at a precise 90° angle.
Slots | Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Lg. | Wd. | No. of | Dia. | Ctr.-to-Ctr. | Material | Each | |
| 3 5/8" | 1 3/16" | 1 5/8" | 1 | 2" | 5/8" | 1 | 5/8" | __ | Black-Oxide Steel | 0000000 | 000000 |
| 3 5/8" | 1 3/16" | 3 5/8" | 1 | 2" | 5/8" | 3 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 1 3/16" | 3 5/8" | 1 | 5" | 5/8" | 3 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 1 3/16" | 7 5/8" | 1 | 5" | 5/8" | 7 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 2" | 12" | 1 | 5" | 5/8" | 11 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 000000 |
Straightedge stops mount to the table to create a reliable straightedge for alignment.
Toggle clamp mounting plates let you position a toggle clamp anywhere on the table.
Plate | Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Thread Size | Stud Dia. | Material | Each | |
| 2 3/4" | 2 3/8" | 5/8" | 4, 4 | M5, M6 | 5/8" | Steel | 0000000 | 000000 |
 2" Lg.×2" Wd.×10" Ht. Fixturing Square |  4" Lg.×4" Wd.×4" Ht. Fixturing Square | |
 6" Lg.×2" Wd.×12" Ht. Fixturing Square | ||
 6" Lg.×2" Wd.×12" Ht. Fixturing Square |  6" Lg.×2" Wd.×12" Ht. Fixturing Square | |
Fixturing squares elevate workpieces or position clamps and other fixture components. Use them individually or stack multiple.
Slots | Holes | Tolerance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Lg. | Wd. | Ctr.-to-Ctr. | Plate Thick. | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Wt., lbs. | Squareness per 4" | Parallel | Material | Each | |
| 2" | 2" | 10" | __ | __ | __ | __ | 1/2" | 20 | 5/8" | 1" | __ | 5 | 0.001" | 0.002" | Steel | 0000000 | 0000000 |
| 4" | 4" | 4" | 2 | 2" | 5/8" | 2" | 1/2" | 21 | 5/8" | 2" | 1 7/16" | 8 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 4" | 4" | 8" | 2 | 2" | 5/8" | 2" | 1/2" | 39 | 5/8" | 2" | 1 7/16" | 13 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 4" | 4" | 12" | 2 | 2" | 5/8" | 2" | 1/2" | 57 | 5/8" | 2" | 1 7/16" | 18 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 6" | 2" | 12" | 2 | 4" | 5/8" | __ | 15/32" | 26 | 5/8" | 1" | 1" | 6.4 | 0.002" | 0.006" | Iron | 0000000 | 000000 |
Side clamps apply pressure to hold work from the side.
| Lg. | Ht. | Stud Dia. | Material | Spindle Material | Each | |
| 3 1/2" | 2" | 5/8" | Black-Oxide Steel | Aluminum | 0000000 | 000000 |
Risers hold components above the surface of the table. A 5/8” hole at the top lets you attach a component, such as a V-block, to the riser.
V-blocks support round material and raise it off the table. Pivoting V-blocks conform to the shape of your workpiece, so they're good for holding round workpieces of different diameters.
Fasteners connect components to each other or to the table.
Thread | Head | Drive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shoulder Lg. | Size | Lg. | Dia. | Ht. | Lg. | Size | Style | Material | Includes | Pkg. Qty. | Each | |
Shoulder Screw—5/8” Shoulder Dia. (-0.001” to 0”) | ||||||||||||
| 1/2" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 00000 |
| 3/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 7/8" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 1" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 1 1/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
Ball-Lock Screw—5/8” Stud Dia. | ||||||||||||
| __ | __ | __ | 7/8" | __ | 7/8"-1 1/8" | 1/4" | Hex | Steel | __ | __ | 0000000 | 00000 |
| Pkg. | ||||||||||||
| __ | __ | __ | 7/8" | __ | 7/8"-1 1/8" | 1/4" | Hex | Steel | __ | 12 | 0000000 | 000000 |
Portable Fixturing Tables
Foldable for transport and storage, use these tables as a sturdy work surface for welding, assembly, cutting, and other tasks around your facility. They have center slots for holding workpieces using C- and bar clamps, a tilting top, and rails on two sides that can be used as guides, stops, and clamping edges.
Use a connector plate (sold separately) to join two tables together for a larger work surface.
T-Slot Fixture Plates
These plates have three T-slots for use with T-slot nuts, bolts, and setup studs. There is a slot along each side of the plate for mounting with clamps.
Aluminum plates are lightweight and have mild corrosion resistance. Iron plates are heavy duty for long term use.
For technical drawings and 3-D models, click on a part number.
Grid Fixture Plates
Precision ground to the tightest parallel tolerance, these plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.
For technical drawings and 3-D models, click on a part number.
Threaded Holes | Unthreaded Holes | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | No. of | Thread Size | Ctr.-to-Ctr. (A) | No. of | Dia. | Ctr.-to-Ctr. (B) | No. of | Style | Ctr.-to-Ctr. | For Mounting Screw Size | Wt., lbs. | Parallel Tolerance | Material | Each | |
| 17 1/2" | 11" | 1 1/8" | 82 | 1/2"-13 | 1 1/4" | 35 | 0.501" | 2 1/2" | 4 | Counterbored | 5" | 1/2" | 56 | 0.0005" | A36 Steel | 0000000 | 000000000 |
| Fixture Plate Chip Plug | 0000000 | Each | 00000 |
Inspection and Measuring Fixturing
Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with 1/4"-20 holes. They are not for use in machining applications.
For technical drawings and 3-D models, click on a part number.
Fixture plates have a grid of 1/4"-20 threaded holes spaced 1/2" apart for attaching components. Alpha-numeric markings around the edges of the plates make it easier to identify holes and repeat tasks. Use aluminum plates with CMMs and optical comparators.
Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Parallel Tolerance | No. of | Style | Thread Size | Ctr.-to-Ctr. | Material | Each | |
| 3" | 3" | 1/2" | 0.0025" | 21 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 0000000 |
| 3" | 6" | 1/2" | 0.0025" | 51 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 6" | 6" | 3/8" | 0.0025" | 121 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 12" | 12" | 1/2" | 0.005" | 484 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 18" | 18" | 1/2" | 0.01" | 1,156 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 00000000 |
| 24" | 24" | 3/4" | 0.01" | 2,116 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 00000000 |
Vacuum Workholding Plates
Also known as vacuum chucks, these plates secure thin and flexible parts that can’t be held with vises or clamps for milling, drilling, routing, and finishing operations. Connect the system to your shop’s compressed air supply and it's ready to use. For applications requiring only part of the plate surface, use the gasket cord to seal off the area.
Risers, also known as vacuum pods, raise the workpiece off the vacuum table to give the cutting tool better access. Suction transfers from the table through the top of the riser, so to get a firm hold the workpiece must make contact with the full top length and width of the riser.
Retracting stop pins let you repeatably locate parts on your vacuum table. After positioning your workpiece against these pins, turn on the vacuum and the stop pins retract, dropping out of the way so the cutting tool has full access to the workpiece.
Side stops fit into the grooves of the vacuum plate to help you repeatably position material. They can be removed from the plate after the vacuum is turned on to give the cutting tool more access to the workpiece.
Pallet-Style Stackable Racks
With forklift access on four sides, you can move these racks as easily as you move your pallets. Stack racks up to five units high, and easily reconfigure as your needs change. Racks should only be moved one unit at a time.
Overall | Usable | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht., ft. | Dp. | Wd. | Dp. | Color | Post Gauge | Overall Capacity, lbs. | Number of Entry Points for Forklifts | Max. Number of Stackable Units | Decking Material | Each | |
Solid Decking Construction | ||||||||||||
Painted Steel | ||||||||||||
| 48" | 3 | 42" | 43" | 37" | Gray | 14 | 4,000 | 4 | 5 | Wood | 00000000 | 0000000 |
| 48" | 3 | 48" | 43" | 43" | Gray | 14 | 4,000 | 4 | 5 | Wood | 00000000 | 000000 |
| 48" | 3 | 48" | 45" | 45" | Gray | 13 | 2,000 | 4 | 5 | Wood | 00000000 | 000000 |
| 48" | 4 | 48" | 43" | 43" | Gray | 14 | 4,000 | 4 | 5 | Wood | 00000000 | 000000 |
| 48" | 4 | 48" | 45" | 45" | Gray | 13 | 2,000 | 4 | 5 | Wood | 00000000 | 000000 |
| 60" | 4 | 48" | 55" | 43" | Gray | 14 | 4,000 | 4 | 5 | Wood | 00000000 | 000000 |
Vented Decking Construction | ||||||||||||
Painted Steel | ||||||||||||
| 48" | 3 | 42" | 43" | 37" | Gray | 14 | 4,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 48" | 3 | 42" | 45" | 39" | Gray | 13 | 2,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 48" | 3 | 48" | 43" | 43" | Gray | 14 | 4,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 48" | 3 | 48" | 45" | 45" | Gray | 13 | 2,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 48" | 4 | 48" | 43" | 43" | Gray | 14 | 4,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 48" | 4 | 48" | 45" | 45" | Gray | 13 | 2,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 60" | 4 | 48" | 55" | 43" | Gray | 14 | 4,000 | 4 | 5 | Steel | 00000000 | 000000 |
| 60" | 4 | 48" | 57" | 45" | Gray | 13 | 2,000 | 4 | 5 | Steel | 00000000 | 000000 |
Forklift-Entry Cylinder Racks
Racks should be empty when moved with a forklift.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Max. Number of Cylinders | Holding Mechanism | For Cylinder Dia. | Wd. | Ht. | Dp. | Color | Specifications Met | Each | |
Painted Steel | |||||||||
| 4 | Bar | 6"-9" | 34" | 41" | 23" | Orange | OSHA Compliant 29 CFR 1910.110 | 0000000 | 0000000 |
| 6 | Bar | 6"-9" | 34" | 41" | 33" | Orange | OSHA Compliant 29 CFR 1910.110 | 0000000 | 000000 |
| 8 | Bar | 6"-9" | 34" | 41" | 43" | Orange | OSHA Compliant 29 CFR 1910.110 | 0000000 | 000000 |