Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

View and control output pressure remotely and at the source.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Run up to four air-powered tools from a single air supply.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Flowmeters let you see the gas flow rate from a distance.

Reduce contaminants in gases used in research sample systems, emission monitoring systems, chromatography, and other high-purity applications. These valves have a 316 stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination.

Designed for nitrogen gas purging in air conditioning, refrigeration, and plumbing systems.

A cast iron body absorbs vibration from pressure changes to reduce wear and noise in your pipeline.

Thicker walls and a 304 stainless steel seal make these valves tougher than brass pressure-regulating valves.

To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged to Fed. Std. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Prevent changes to your pressure setting—these valves come set at a nonadjustable outlet pressure.

Often used on dispensers, humidifiers, and fountains, these valves have a 316 stainless steel body that can stand up to deionized water and corrosive conditions.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

For extremely high-pressure applications in tight spots, these valves handle the same inlet pressures as other ultra-high-pressure-regulating valves within a smaller footprint.

Withstand more than six times the inlet pressure of standard pressure-regulating valves.

Valves have a brass body.

Withstand inlet pressures up to 3,500 psi.

Commonly used for oxygen service and other high-purity applications, these valves come cleaned and bagged to prevent contamination.

Body is cast iron.

Control steam line pressure with ±1 psi accuracy.

For use with acetylene, hydrogen, methane, propane, or propylene gas.

Install these valves directly in gas distribution pipelines.

For a longer service life than standard valves for cryogenic liquids, these have a durable bronze body. They’re for use with liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.

Regulate air, gas, and liquid pressure on food, beverage, and pharmaceutical lines with these valves—they’re 3-A certified to meet sanitary design standards.

It's like getting four regulators in one—each comes with four springs so you can change between regulating pressure ranges of 2-30, 10-50, 30-90, and 100-180 psi.

Regulate vacuum levels from your instrument panel with these valves that have threads below the adjustment handle and a panel-mount nut.

A lighter and more corrosion-resistant alternative to metal vacuum-regulating valves.