Place these scales on your bench top to handle weighing jobs right where you work.

A stainless steel housing and platform resist corrosion in wet conditions and harsh environments.

Count parts and weigh materials sold by weight.

IP69K and NTEP approved as legal for trade, use these scales in washdown environments for material that may be sold by weight.

Similar in style to a hand truck, this scale tilts back on two rubber wheels to move.

Position the display up to 14 feet from the platform for reading at a safe distance.

Determine the approximate weight of large, bulky materials that are impractical to weigh with a floor scale. These scales are often used in loading vehicles and can be suspended from a crane, block and tackle lift, A-frame, or forklift blade.

A sealed aluminum housing protects from corrosion in wet environments.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

Use the included Windows-compatible software to upload measurement data.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

Finger-tighten the three-jaw chuck onto the tool to be measured, then twist either the gauge or tool to test.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening.

A calibration certificate traceable to NIST is included with these stainless steel rulers.

Rulers have large numbers and deeply etched graduations.

Ensure accurate measurements with these certified rulers.

Also known as machinists’ rules, these rulers ensure reliable, repeatable measurements.

An economical alternative to Starrett High-Accuracy Rulers, these provide reliable, repeatable measurements.

A reversible, removable hook grabs the edge of an object for easy alignment.

High-powered magnets hold these rulers in place.

Rulers are narrow and just 6" long to measure in tight spaces.

Create a ruler up to 192" long by adding continuous segments.

Measurements are printed from top to bottom for measuring heights and depths.

Use to measure heights and tank levels.

The blade locks in place when extended until you press the release lever, and a magnetic-hook tip attaches to metal surfaces to assist vertical and distance measuring.

These tape measures have a chrome-plated, impact-resistant plastic case.

Compared to standard tape measures, these are less than half the size.

Ensure accurate measurements with certified tape measures.

Slide the lock to hold the blade in place. The case is chrome-plated, impact-resistant plastic.

The case is impact-resistant plastic that's yellow for high visibility. Slide the lock to hold the blade in place.

Measure from a distance—the blade on these tape measures remains rigid when extended up to 11 feet.

All internal parts, including the blade, are stainless steel for corrosion resistance.

Accurately measure diameter.

Grip the tape measure through the hole in the center and quickly rewind the blade with the specially designed reel.

These reliable tape measures include a calibration certificate traceable to NIST stating they have passed a test for accuracy.

Connect continuous segments to create a ruler up to 10 ft. long.

This digital readout system displays precise positioning on one axis. For use with machines that perform dry machining and cutting applications, such as table saws, band saws, planers, and drill presses.

Install a digital readout stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.

Reach deep into small holes and slots for precise depth measurements.

Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.

Blades are for use with High-Accuracy Combination Square Heads.

Attach to High-Accuracy Combination Square Blades with the included lockbolts.

A titanium coating protects the blade against scratches and wear.

Ensure reliable, repeatable angles.

These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.

Measure and mark material exactly where you need to with a sliding blade.

Pipe fitting sizes and welding charts are shown on this square in wear-resistant etched markings.

Measure angles and dimensions with one tool.

Set bevels and measure angles. Also known as bevel protractors, these have an adjustable arm.

Take precise measurements with this protractor.

Handle big jobs such as sheet metal fabricating and pipe bending with these long-arm protractors.

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle.

These angle indicators display highly accurate angle, level, and tilt measurements.

These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.

Also known as safety scales, these gauges confirm that the gaps between the grinding wheel and the tool rest and tongue comply with OSHA and ANSI requirements.

These scales come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

An economical way to determine the hardness of steel on the Rockwell C-scale.

Glow-in-the-dark vials are easy to read in low light.

One of the horizontal vials is a pitch gauge that reads slope in 1/8" increments.

Align and measure at the same time with these levels that have rulers on the front and side.

Adjust a surface into a level position on multiple planes.